Flash Program for the STM32 Bootloader

Edit Package stm32flash
https://code.google.com/p/stm32flash/

Open source flash program for the STM32 ARM processors using the ST serial bootloader over UART or I2C.

Features:
- UART and I2C transports supported
- device identification
- write to flash/ram
- read from flash/ram
- auto-detect Intel HEX or raw binary input format with option to force
binary
- flash from binary file
- save flash to binary file
- verify & retry up to N times on failed writes
- start execution at specified address
- software reset the device when finished if -R is specified
- resume already initialized connection (for when reset fails, UART only)
- GPIO signalling to enter bootloader mode (hardware dependent)

Source Files
Filename Size Changed
0001-hex-parser-Warn-about-large-gaps-and-detect-allocati.patch 0000001540 1.5 KB
0002-serial_posix-Fix-setup-from-odd-parity-or-two-stop-b.patch 0000000883 883 Bytes
0003-dev_table-Add-placeholders-for-all-devices-in-AN2606.patch 0000003124 3.05 KB
0004-dev_table-Add-support-for-device-0x497-STM32WLE5xx.patch 0000001458 1.42 KB
0005-dev_table.c-Add-STM32H72xxx-73xxx-Device-ID-0x483.patch 0000001766 1.72 KB
0006-dev_table.c-Add-STM32H7A3xx-B3xx-Device-ID-0x480.patch 0000002600 2.54 KB
0007-dev_table.c-Add-STM32U575xx-585xx-Device-ID-0x482.patch 0000001535 1.5 KB
0008-dev_table.c-Add-STM32WB30xx-50xx-Device-ID-0x495.patch 0000001999 1.95 KB
0009-dev_table.c-Add-STM32L4P5xx-Q5xx-Device-ID-0x471-dua.patch 0000001921 1.88 KB
0010-dev_table.c-Add-STM32L552xx-562xx-Device-ID-0x472-du.patch 0000001724 1.68 KB
0011-dev_table.c-Add-STM32WB10xx-15xx-Device-ID-0x494.patch 0000001447 1.41 KB
0012-main-Report-as-Option-bytes-and-System-memory.patch 0000001398 1.37 KB
0013-dev_table-Tighten-option-bytes-range-for-device-ID-0.patch 0000002448 2.39 KB
stm32flash-0.7.tar.gz 0000380166 371 KB
stm32flash.changes 0000003676 3.59 KB
stm32flash.spec 0000003064 2.99 KB
Comments 0
No comments available
openSUSE Build Service is sponsored by