Serviceability for SCSI Disks and Arrays

Edit Package scsirastools

Hard disks are the most commonly replaced system elements, and are
therefore a critical consideration for improving availability. Root
Disk Mirroring (RAID-1) is the technique of using redundant disks to
record multiple copies of the data so that one disk failure will not
cause data loss.

This project includes changes that enhance the Reliability,
Availability, and Serviceability (RAS) of the drivers that are commonly
used in a Linux software RAID-1 configuration. Other efforts have been
made to enable various common hardware RAID adapters and their drivers
on Linux.

The tools in this project were designed to add to the serviceability of
SCSI devices under Linux so that the system does not have to be
rebooted or taken out of service to perform common maintenance or
service functions. This project has user-space and kernel level
components:

sgraidmon - a tool to monitor software RAID disks for
hot-insertion/removal; Note that this uses raidtools like mdadm to
re-configure the new disk. sgdefects - a tool to read the primary and
grown defect lists sgdskfl - a tool to load disk firmware to SCSI disks
under Linux; some sample firmware images are included in the package
sgmode - a tool to get and set SCSI device mode pages; some sample mode
page definition files are included in the package sgdiag - a tool to
perform format and other diagnostic functions

The scsiras patches are not currently included in our kernel.

Refresh
Refresh
Source Files
Filename Size Changed
scsirastools-1.4.9-SuSE.diff 0000005317 5.19 KB
scsirastools-1.6.4.tar.bz2 0000494147 483 KB
scsirastools-install 0000000303 303 Bytes
scsirastools-single-dev.diff 0000001481 1.45 KB
scsirastools.changes 0000005129 5.01 KB
scsirastools.spec 0000004186 4.09 KB
Latest Revision
Adrian Schröter's avatar Adrian Schröter (adrianSuSE) committed (revision 1)
branched from openSUSE:Factory
Comments 0
openSUSE Build Service is sponsored by