Necessary Tools for Using the Infrared Port

This package contains all necessary scripts and programs for setting up
and using the infrared port for printing or communicating. The start
and stop scripts are prepared to access the UART emulation ('SIR' mode)
with 115 kbit/s data transfer rate. This is supported by most laptops
with an infrared interface.

After starting the infrared protocol manager 'irmanger' with the
command 'rcirda start', you can send data to your printer using the
device file /dev/irlpt0. If you like to talk to other computers with
infrared interface or to a mobile phone, you can use the serial
emulation provided by the device file /dev/ircomm0.

Take a look at the README file located in
/usr/share/doc/packages/irda/README and the IRDA HOWTO in
/usr/share/doc/howto/en/IR-HOWTO.gz. If the infrared port on your
laptop is located on an IO or IRQ address other than IO address 0x2f8
(/dev/ttyS1) or interrupt 3, you should use YaST to change the
variables IRDA_PORT and IRDA_IRQ in the configuration file

Source Files
Filename Size Changed
52-irda.rules 0000000268 268 Bytes over 13 years
irda-0.9.18-buildroot.diff 0000000675 675 Bytes over 13 years
irda-0.9.18-findchip-ppc.diff 0000002385 2.33 KB over 13 years
irda-0.9.18-irdadump-flush-stdout.diff 0000000428 428 Bytes over 13 years
irda-0.9.18-irnetd-install.diff 0000000287 287 Bytes over 13 years
irda-0.9.18-no-findchip-smc.diff 0000000236 236 Bytes over 12 years
irda-0.9.18-psion-no-strict-aliasing.diff 0000000413 413 Bytes over 13 years
irda-0.9.18.init 0000002513 2.45 KB about 12 years
irda-0.9.18.sysconfig 0000001390 1.36 KB over 13 years
irda-libpci_with_libz.diff 0000000506 506 Bytes over 13 years
irda-optflags.diff 0000000993 993 Bytes about 12 years
irda-utils-0.9.16-fix-off-by-one.diff 0000000446 446 Bytes over 13 years
irda-utils-0.9.18-fix-irkbd-makefile.diff 0000000403 403 Bytes over 13 years
irda-utils-0.9.18.tar.bz2 0000138039 135 KB about 12 years
irda.changes 0000007314 7.14 KB about 12 years
irda.spec 0000009417 9.2 KB about 12 years
ready 0000000000 0 Bytes over 13 years
Comments for irda 0