Please put in staging with libmbim (Staging:E atm)! - Will not build if not.

- Update to version 1.20.6:
  + build: New build option to allow disabling the installation of
    examples.
  + core:
    - Fix crash when uninhibiting partially removed device.
    - Fix crash when attempting to load an invalid shared utils
      library.
  + mmcli:
    - Allow JSON and key/value output when creating SMS messages.
    - Improved JSON output in network scan results.
  + libmm-glib:
    - Avoid using g_time_zone_new_offset() unless glib >= 2.58.
    - Fix flags to string conversion utils to allow multiple flags.
  + MBIM:
    - Reset cached SIM info when SIM is unlocked.
    - Fix synchronizing the state of the SIM hot swap configured
      flag.
    - Fix bug cleaning up the LTE attach info unsolicited message
      handler.
    - Fallback from QMI UIM service only if unsupported.
    - Add missing support for 'emergency' APN type.
  + QMI:
    - Fix processing and exposing PCOs.
    - Fix power up on modems that don't support power state change
      indications.
  + plugins:
    - telit:
      . add additional support for 5G modems.
      . added port type hints for FN990 0x1070, 0x1071
        compositions.
      . increase allowed initial delay in AT ports.
      . fallback to AT commands if loading revision via MBIM fails.
    - quectel: add support for EC21-EUX usb modules.
    - xmm: fix crash parsing XACT? response.
- Changes from version 1.20.4:
  + build:
    - Don't hardcode building shared libraries, so that meson's
      default_library option can be used properly,
    - po: Added missing Georgian translation in LINGUAS.
  + QMI:
    - Fixed loading NR5G signal info.
    - Fixed memory leaks when processing signal info.
    - Correctly scaled the SNR value reported in NR5G.
    - Fixed invalid use-after-free actions due to improper handling
      of proxy removal events.
  + MBIM:
    - Fixed processing MbimSmsStatusFlag as flags, not as an enum.
    - Fixed invalid use-after-free actions due to improper handling
      of proxy removal events.
    - Chained up device notifications through the MMPortMbim
      object.
  + Messaging: Allowed Delete operation during enabling/disabling.
  + Core: Don't assume port tables always exist so that
    long-standing operations holding an object reference can finish
    cleanly even after the initial object disposal has already been
    run.
  + plugins:
    - quectel: added new firehose/sahara support udev tags in new
      models.
    - broadmobi: added MM_PLUGIN_REQUIRED_QCDM flag.
    - cinterion:
      . added a delay to the ^SWWAN? command.
      . added retry mechanism to the ^SWWAN? command.
- Changes from version 1.20.2:
  + build:
    - Fixed building without MBIM support.
    - Fixed building without tests support.
    - Disabled test interface in base manager if building without
      tests.
    - Updated intel plugin dependencies to require XMM shared
      utils.
    - Fixed templates to make build reproducible.
  + FCC unlock: Updated shell scripts to avoid requiring bash.
  + MBIM:
    - Ignored SIM related indications during a SIM slot switch
      operation.
    - Updated capabilities loading to use Microsoft Extensions if
      available.
    - Updated supported modes loading to use the CustomDataClass
      field contents.
  + SIM: Fixed length when reading GID1/GID2 using AT commands.
  + Several other minor improvements and fixes.
- Changes from version 1.20.0:
  + API:
    - New 'Modem.Sar' interface to allow the host to manage the SAR
      power level.
    - New 'Modem.GetCellInfo()' method, that allows querying
      information about the current serving and neighboring cells.
      Currently including 'cell-type' and 'serving' fields for all
      cell types, plus additional type-specific fields:
      . CDMA: 'nid', 'sid', 'base-station-id', 'ref-pn' and
        'pilot-strength'.
      . GSM: 'operator-id', 'lac', 'ci', 'timing-advance', 'arfcn',
        'base-station-id' and 'rx-level'.
      . UMTS: 'operator-id', 'lac', 'ci', 'frequency-fdd-ul',
        'frequency-fdd-dl', 'frequency-tdd', 'uarfcn', 'psc',
        'rscp', 'ecio' and 'path-loss'.
      . TDSCDMA: 'operator-id', 'lac', 'ci', 'uarfcn',
        'cell-parameter-id', 'timing-advance', 'rscp' and
        'path-loss'.
      . LTE: 'operator-id', 'tac', 'ci', 'physical-ci', 'earfcn',
        'rsrp', 'rsrq' and 'timing-advance'.
      . 5GNR: 'operator-id', 'tac', 'ci', 'physical-ci', 'nrarfcn',
        'rsrp', 'rsrq', 'sinr' and 'timing-advance'.
    - New 'access-type-preference', 'roaming-allowance',
      'profile-name', 'profile-enabled' and 'profile-source'
      fields in the 'Bearer.Properties' property, that can also be
      used in both 'Modem.Simple.Connect()' and
      'Modem.CreateBearer()'.
    - New 'Modem.Modem3gpp.SetPacketServiceState()' method and
      'Modem.Modem3gpp.PacketServiceState' property, which allow
      management the explicit attach or detach to packet service on
      the current registered network.
    - New 'Modem.Modem3gpp.SetNr5gRegistrationSettings()' method
      and 'Modem.Modem3gpp.Nr5gRegistrationSettings' property, to
      allow management of 5G specific settings like 'mico-mode' or
      'drx-cycle'.
    - New 'start-date', 'uplink-speed' and 'downlnk-speed' fields
      in the 'Bearer.Stats' property.
    - New 'Bearer.ReloadStatsSupported' property to indicate
      whether reloading ongoing stats is supported or not.
    - New 'Modem.Modem3gppProfileManager.IndexField' property, to
      indicate which field is to be used as unique index in the
      profile management operations.
    - New 'Sim.SimType', 'Sim.EsimStatus' and 'Sim.Removability'
      properties to improve the management of eSIM related
      operations.
    - New 'Sim.Gid1' and 'Sim.Gid2' properties, which allow
      identifying SIM cards that should have different settings
      applied.
    - New 'Modem.Signal.SetupThresholds() method,
      'Modem.Signal.RssiThreshold' and
      'Modem.Signal.ErrorRateThreshold' to allow configuring
      thresholds so that the modem emits indications whenever the
      signal quality values change based on those thresholds. For
      RSSI a delta amount of dBm can be given, and for error rate
      just a boolean to enable or disable the corresponding event.
    - New 'error-rate' fields in the 'Modem.Signal.Cdma',
      'Modem.Signal.Evdo', 'Modem.Signal.Gsm', 'Modem.Signal.Umts',
      'Modem.Signal.Lte' and 'Modem.Signal.Nr5g' properties.
  + Core:
    - Detecting an eSIM without an active profile in the current
      SIM slot will lead to the modem being in Failed state, in the
      same way as if the slot was for a physical SIM and no SIM was
      inserted.
    - Default amount of AT probing attempts is updated to 6, to
      cope with modems that are slower to boot.
    - New '--test-mbimex-profile-management' option in the daemon,
      to enable support for profile management operations using the
      Microsoft extensions. This is an optional feature because it
      requires using the 'apn-type' field as unique index, which
      not all users of the profile management API may expect.
    - Implemented some initial support to automatically hide
      personal details (e.g. phone numbers, SMS contents...) from
      logs, right now only applicable to QMI and MBIM logs. Updated
      support for this feature will keep on being integrated in
      future 1.20.x updates. The new '--log-personal-info' option
      in the daemon allows to disable this feature completely.
    - Added new filter match option for subsystem vendor id,
      required in several PCI based Qualcomm modules.
    - QCDM port probing will no longer automatically run for all
      plugins, only in those that explicitly require it.
    - Implemented support for suspend/resume detection based on
      ChromeOS' powerd daemon.
    - Added Cat-M and NB-IoT LPWA access technologies.
  + Modem interface: On 3GPP+3GPP2 multimode devices, a missing SIM
    card will now force the modem into Failed state, as if it was a
    3GPP-only device.
  + Simple interface: Explicitly wait for PS domain to be attached
    during a connection attempt.
  + 3GPP interface: Updated to report domain registration changes
    altogether whenever possible (e.g. when using the QMI or MBIM
    protocols).
  + MBIM:
    - Implemented support to use the Microsoft-defined MBIM
      extensions v2 and v3 whenever supported by the device. The
      ModemManager daemon will negotiate which version to use with
      the modem, so that the highest version supported is enabled.
      This negotiation applies to the whole device, so any other
      user of the MBIM device will automatically start using the
      newly agreed version.
    - Implemented current modes switching using MBIMEx v2.0
      extensions.
    - Trigger explicit disconnection if a connection attempt fails.
    - Modem will be flagged as unusable if 10 consecutive MBIM
      requests timeout.
    - Enabled multiplex support for devices in the WWAN subsystem.
  + QMI:
    - Updated logic to by default prefer 'Signal Info' over the
      deprecated 'Signal Strength' operations.
    - Updated logic to by default prefer 'System Info' over the
      deprecated 'Serving System' operations.
    - Updated power state transition logic to ensure the new state
      is reached before returning success to the user.
    - Implemented support for the 'Modem3gppProfileManager.Updated'
      signal using PDC refresh notifications.
    - Modem will be flagged as unusable if 10 consecutive QMI
      requests timeout.
    - Implemented DTMF support.
    - Implemented support for automatic SIM IMSI switch detection
      under certain roaming scenarios.
    - Updated the logic to move the PS domain state to 'registered'
      based on the DSD System Status indications.
    - Updated endpoint type detection logic to be based on the net
      driver.
    - Updated endpoint number selection to be based on the data
      port.
    - Updated connection logic to allocate separate WDS clients per
      endpoint.
    - Added support for PCO reporting.
  + plugins:
    - quectel: Added FCC unlock support for the EM05-G.
    - telit:
      . Band management updated to prefer using QMI whenever
        available, as well as to detect the #BND command format
        automatically.
      . Added support for LPWA modems.
    - fibocom:
      . Implemented optional support to power down and up the modem
        during the update of the initial EPS bearer settings.
      . Implemented initial EPS bearer settings management in the
        MA510.
    - intel: New generic plugin for Intel PCI devices with vid
      0x8086.
    - xmm: Prefer GNSS control ports explicitly tagged via udev
      tags.
    - foxconn: Use the new FOX QMI service to load firmware
      version.
    - cinterion: Added support for PCIe based devices.
- Use ldconfig_scriptlets macro.
- Switch to meson buildsystem, add meson BuildRequires and macros.
- Add xsltproc and pkgconfig(bash-completion) BuildRequires: New
  dependencies.

• Files Changed
• Browse Source