File buildavr-no-insight.sh of Package avarice

Overview Repositories Revisions Requests Users Attributes Meta

File buildavr-no-insight.sh of Package avarice

#!/bin/bash

# AVR GNU development tools install script
# $Id: buildavr.sh,v 1.21 2004/11/09 02:25:48 rmoffitt Exp $
# Modified by AJ Erasmus    2005/03/22
# Use the same source and patches as for WinAVR 20050214
# Updated script to compile the C and C++ compilers, as well
# as allow the output of dwarf-2 debug information 2005/03/25
# Updated script to add new devices 2005/03/26

# Copyright (C) 2003-2004 Rod Moffitt rod@rod.info http://rod.info
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.

# run the script as is to get a list of the files necessary to build,
# takes optionally three arguments, the location of the source files,
# where to install and build the tools and the path where to output a
# log file

# start of configuration, edit these defaults to suit your environment, or
# simply override them via the command line - you will need write
# permission to $prefix (make sure it's empty or non-existent!)

# location of source tarballs
archive=${PWD}

# GNU tools will be installed under this directory
#prefix=$archive/avr
prefix=/usr/local/avr

# build log file - see this if any errors occur
buildlog=/tmp/buildavr.log

# end of configuration

# what are we building for?
target=avr

# the files below shouldn't be changed unless a new release has been made
# and I (Rod) haven't updated this script!
avaricever=2.10
avaricebase=avarice-${avaricever}
avaricetar=${avaricebase}.tar.bz2

avrdudever=5.10
avrdudebase=avrdude-${avrdudever}
avrdudetar=${avrdudebase}.tar.gz

binutilsver=2.19.1
binutilsbase=binutils-${binutilsver}
binutilstar=${binutilsbase}.tar.bz2
sourcefiles="${sourcefiles} ${binutilstar} 
binutils-patch-aa.diff   binutils-patch-newsections.diff
binutils-patch-avr-size.diff  binutils-patch-coff-avr.diff binutils-patch-xmega.diff
binutils-patch-data-origin.diff  binutils-patch-zzz-atmega128rfa1.diff
binutils-patch-newdevices.diff binutils-patch-avr25-wraparound-reloc.diff"

gmpver=4.3.1
gmpbase=gmp-${gmpver}
gmptar=${gmpbase}.tar.bz2

mpfrver=4.3.1
mpfrbase=gmp-${mpfrver}
mpfrtar=${mpfrbase}.tar.bz2

gccver=4.3.3  
gcccore=gcc-${gccver}
gcccoretar=${gcccore}.tar.bz2
gccbase=gcc-${gccver}

sourcefiles="${sourcefiles} ${gcccoretar}  
gcc-patch-avr-libgcc.S.diff                gcc-patch-libiberty-Makefile.in.diff
gcc-patch-bug11259.diff                    gcc-patch-newdevices.diff
gcc-patch-bug19636-24894-31644-31786.diff  gcc-patch-xmega.diff
gcc-patch-bug33009.diff                    gcc-patch-xx-os_main.diff
gcc-patch-bug34210-35508.diff              gcc-patch-bug35013.diff"

avrlibcver=1.6.7
avrlibcbase=avr-libc-${avrlibcver}
avrlibctar=${avrlibcbase}.tar.bz2
sourcefiles="${sourcefiles} ${avrlibctar}"

function buildandinstall()
{
   mkdir -p $prefix/source $prefix/build

cd $prefix/source

echo "($0) installing avarice source"
   tar xvjf $archive/${avaricetar}
   cerror "avarice source installation failed"

cd ${avaricebase}

echo "($0) patching avarice source"
#
   patch -p0 < $archive/avarice-2.10-bug2812023.patch
   cerror "avarice patching failed"

mkdir -p ../../build/${avaricebase}
   cd ../../build/${avaricebase}

echo "($0) configuring avarice source"
   ../../source/${avaricebase}/configure -v --prefix=$prefix 
#--with-gnu-ld --with-gnu-as --quiet --enable-install-libbfd --with-dwarf2
   cerror "avarice configuration failed"

echo "($0) building avarice"
   make all install clean
   cerror "avarice build failed"

#
#
#
   cd $prefix/source

echo "($0) installing ardude source"
   tar xvzf $archive/${avrdudetar}
   cerror "avrdude source installation failed"

cd ${avrdudebase}
#
#
#   echo "($0) patching avrdude source"
#
#   patch -p1 < $archive/avrdude-5.8-xprog-fix.patch
#   patch -p0 < $archive/avrdude-5.8-bug27507.patch
#   cerror "avrdude patching failed"
#
   mkdir -p ../../build/${avrdudebase}
   cd ../../build/${avrdudebase}

echo "($0) configuring avrdude source"
   ../../source/${avrdudebase}/configure -v --prefix=$prefix 
#--with-gnu-ld --with-gnu-as --quiet --enable-install-libbfd --with-dwarf2
   cerror "avrdude configuration failed"

echo "($0) building avrdude"
   make all install clean
   cerror "avrdude build failed"

#
#
#
   cd $prefix/source

echo "($0) installing binutils source"
   tar xvjf $archive/${binutilstar}
   cerror "binutils source installation failed"

cd ${binutilsbase}

echo "($0) patching binutils source"
#
   patch -p0 < $archive/binutils-patch-aa.diff
   cerror "binutils patching failed"
#
   patch -p0 < $archive/binutils-patch-coff-avr.diff
   cerror "binutils patching failed"
#
   patch -p0 < $archive/binutils-patch-data-origin.diff
   cerror "binutils patching failed"
#
   patch -p0 < $archive/binutils-patch-newdevices.diff
   cerror "binutils patching failed"
#
   patch -p0 < $archive/binutils-patch-newsections.diff
   cerror "binutils patching failed"
#
#   Skip below patch , it's included in binutils2.19.1
#   patch -p0 < $archive/binutils-patch-wrong-arch.diff
#   cerror "binutils patching failed"
#
   patch -p0 < $archive/binutils-patch-xmega.diff
   cerror "binutils patching failed"
#
   patch -p0 < $archive/binutils-patch-zzz-atmega128rfa1.diff
   cerror "binutils patching failed"
#
#  Apply EW's AVR25 Architecture patch
   patch -p0 < $archive/binutils-patch-avr25-wraparound-reloc.diff
   cerror "binutils patching failed"
#
   patch -p0 < $archive/binutils-patch-avr-size.diff
   cerror "binutils patching failed"
#
#

mkdir -p ../../build/${binutilsbase}
   cd ../../build/${binutilsbase}

echo "($0) configuring binutils source"
   ../../source/${binutilsbase}/configure -v --target=${target} \
      --prefix=$prefix --with-gnu-ld --with-gnu-as --quiet --enable-install-libbfd --with-dwarf2 --disable-werror CFLAGS="-Wno-format-security "
   cerror "binutils configuration failed"

echo "($0) building binutils"
   make all install clean
   cerror "binutils build failed"

#
   # path to the newly installed binutils is needed to build GCC
   #
   PATH=$prefix/bin:$PATH
   # two lines below special for Ubuntu 
   LD_LIBRARY_PATH=$PREFIX/lib:$LD_LIBRARY_PATH
   LD_RUN_PATH=$PREFIX/lib:$LD_RUN_PATH
   export PATH
   export LD_LIBRARY_PATH
   export LD_RUN_PATH

cd $prefix/source

echo "($0) installing GMP source"
   tar xvjf $archive/${gmptar}
   cerror "GMP source installation failed"

echo "($0) installing mpfr source"
   tar xvjf $archive/${mpfrtar}
   cerror "MPFR source installation failed"

echo "($0) installing GCC source"
   tar xvjf $archive/${gcccoretar}
   cerror "GCC source installation failed"

#
   # Copy GMP & MPFR sources into GCC directory
   #
   rm -rf ${gccbase}/gmp
   rm -rf ${gccbase}/mpfr
   mkdir -p ${gccbase}/gmp
   mkdir -p ${gccbase}/mpfr
   cp -rfp ${gmpbase}/* ${gccbase}/gmp
   cp -rfp ${mpfrbase}/* ${gccbase}/mpfr
#
   cd $prefix/source
   cd ${gccbase}
#
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-avr-libgcc.S.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-bug11259.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-bug19636-24894-31644-31786.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-bug33009.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-bug34210-35508.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-bug35013.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-libiberty-Makefile.in.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-newdevices.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-xmega.diff
   cerror "GCC patching failed"
#
   echo "($0) patching GCC source"
   patch -p0 < $archive/gcc-patch-xx-os_main.diff
   cerror "GCC patching failed"
#

mkdir -p ../../build/${gcccore}
   cd ../../build/${gcccore}

echo "($0) configuring GCC source"
   ../../source/${gccbase}/configure -v --target=${target} --disable-nls \
      --prefix=$prefix --with-gnu-ld --with-gnu-as --enable-languages="c,c++" --disable-libssp --with-dwarf2
   cerror "GCC configuration failed"

echo "($0) building GCC"
#   make all install clean LANGUAGES="c obj-c++"
   make all install clean LANGUAGES="c c++"
   cerror "GCC build failed"

#
#
#
   cd $prefix/source

echo "($0) installing libc"
   tar xvjf $archive/${avrlibctar}
   cerror "libc source installation failed"

cd $avrlibcbase
#   sh reconf
#   sh doconf
#   ./bootstrap
#   cerror "libc source setup failed"

mkdir -p ../../build/${avrlibcbase}
   cd ../../build/${avrlibcbase}

echo "($0) configuring libc source"
   CC=$prefix/bin/avr-gcc ../../source/${avrlibcbase}/configure -v \
      --build=`../../source/${avrlibcbase}/config.guess` --target=${target} --host=avr --prefix=$prefix --quiet
   cerror "libc configuration failed"

echo "($0) building libc"
   make all install clean
   cerror "libc build failed"

# strip all the binaries
   find $prefix -type d -name bin -exec find \{\} -type f \; | xargs strip > /dev/null 2>&1

cecho "\n"
   cecho "${cyan}installation of ${target} GNU tools complete\n"
   cecho "${cyan}add ${GREEN}$prefix/bin${cyan} to your path to use the ${target} GNU tools\n"
   cecho "${cyan}you might want to run the following to save disk space:\n"
   cecho "\n"
   cecho "${green}rm -rf $prefix/source $prefix/build\n"
}

# color definitions
RED='\e[1;31m'
green='\e[0;32m'
GREEN='\e[1;32m'
cyan='\e[0;36m'
yellow='\e[0;33m'
NC='\e[0m' # no color

function cecho()
{
   echo -ne "($green$0$NC) $1$NC"
}

function cerror()
{
   if [ $? -ne 0 ];
   then
      cecho "$RED$1$NC\n"
      exit
   fi
}

function ask()
{
   cecho "$@ [y/n] "
   read ans

case "$ans" in
      y*|Y*) return 0 ;;
      *) return 1 ;;
   esac
}

# source command line overrides

until [ -z "$1" ];
do
   eval "$1"
   shift
done

cecho "${cyan}about to build and install ${target} GNU development tools using\n"
cecho "${cyan}the following settings (override via the command line):\n"
cecho "\n"
cecho "   ${yellow}archive=${archive} $cyan(location of source tarballs)\n"
cecho "   ${yellow}prefix=${prefix} $cyan(installation prefix/directory)\n"
cecho "   ${yellow}buildlog=${buildlog} $cyan(build log)\n"
cecho "\n"
ask "${cyan}proceed?";

if [ "$?" -eq 1 ]
then
   exit
fi

# check on target directory

if [ -d $prefix ];
then
   cecho "\n"
   ask "${RED}$prefix already exists, continue?";

if [ "$?" -eq 1 ]
   then
      exit
   fi
fi

mkdir -p $prefix 2> /dev/null

if [ ! -w $prefix ];
then
   cecho "\n"
   cecho "${RED}failed! to create install directory $prefix\n";
   exit
fi

# check for required files

missingfiles=;

for file in $sourcefiles;
do
   if [ ! -f $archive/$file ];
   then
      missingfiles="${missingfiles} $file";
   fi
done

if [ -n "$missingfiles" ];
then
   cecho "\n"
   cecho "${RED}error! required source file(s):\n";
   cecho "\n"

for file in $missingfiles;
   do
      cecho "   ${yellow}$file\n"
   done

cecho "\n"
   cecho "${cyan}were missing - download them to $archive first\n";
   exit
fi

buildandinstall 2>&1 | tee $buildlog

exit

Places

File buildavr-no-insight.sh of Package avarice

Places