File kpathsea_cnf.dif of Package texlive-specs-m
---
texmf-dist/web2c/fmtutil.cnf | 8 +-
texmf-dist/web2c/mktex.opt | 39 +++++++++--
texmf-dist/web2c/texmf.cnf | 141 +++++++++++++++++++++++++++----------------
3 files changed, 123 insertions(+), 65 deletions(-)
--- texmf-dist/web2c/fmtutil.cnf
+++ texmf-dist/web2c/fmtutil.cnf 2020-04-20 16:19:39.729909034 +0000
@@ -70,8 +70,8 @@ hilatex hitex language.dat -etex -ltx hi
hitex hitex language.def -etex -ltx hitex.ini
#
# from jadetex:
-jadetex pdftex language.dat *jadetex.ini
-pdfjadetex pdftex language.dat *pdfjadetex.ini
+jadetex pdftex language.dat -translate-file=cp227.tcx *jadetex.ini
+pdfjadetex pdftex language.dat -translate-file=cp227.tcx *pdfjadetex.ini
#
# from latex-bin:
dvilualatex luatex language.dat,language.dat.lua dvilualatex.ini
@@ -155,5 +155,5 @@ xelatex xetex language.dat -etex xelatex
xetex xetex language.def -etex xetex.ini
#
# from xmltex:
-pdfxmltex pdftex language.dat *pdfxmltex.ini
-xmltex pdftex language.dat *xmltex.ini
+pdfxmltex pdftex language.dat -translate-file=cp227.tcx *pdfxmltex.ini
+xmltex pdftex language.dat -translate-file=cp227.tcx *xmltex.ini
--- texmf-dist/web2c/mktex.opt
+++ texmf-dist/web2c/mktex.opt 2012-05-14 11:26:00.034911495 +0000
@@ -38,10 +38,11 @@ if test "$DOSISH" = "no"; then SEP=':';
# TEMPDIR needs to be unique to each process because of the possibility of two
# people running dvips (or whatever) simultaneously.
if test -n "$TMPDIR"; then
- TEMPDIR="${TMPDIR}/mt$$.tmp"
+ TEMPDIR="${TMPDIR}/.mtXXXXXXXXXX"
else
- TEMPDIR="/tmp/mt$$.tmp"
+ TEMPDIR="/tmp/.mtXXXXXXXXXX"
fi
+TEMPDIR=$(mktemp -d "$TEMPDIR") || exit 1
# We want to output only filenames to standard output, but it's too
# error-prone to write the scripts that way, so we direct stdout here.
@@ -49,17 +50,23 @@ STDOUT="$TEMPDIR/mt$$.out"
# We will change search paths to include $KPSE_DOT. This is necessary
# since we cd to $TEMPDIR.
-: ${KPSE_DOT=`pwd`}; export KPSE_DOT
+: ${KPSE_DOT=${PWD}}; export KPSE_DOT
# Clean up on normal or abnormal exit.
# The "cd /" is for MS-DOS and MS-Windows, where there is a separate
# current directory on each drive, and therefore "cd $KPSE_DOT" might
# still leave $TMPDIR current directory on its drive, in which case it
# cannot be removed.
-trap 'rc=$?; cd /; cd "$KPSE_DOT"; test -f "$STDOUT" && cat "$STDOUT"; rm -rf "$TEMPDIR"; exit $rc' \
- 0 1 2 3 7 13 15
+atexit ()
+{
+ local rc=$?
+ cd "$KPSE_DOT"
+ test -n "$STDOUT" -a -f "$STDOUT" && cat "$STDOUT"
+ test -n "$TEMPDIR" -a -d "$TEMPDIR" && rm -rf "$TEMPDIR"
+ exit $rc
+}
+trap 'atexit' EXIT SIGHUP SIGINT SIGQUIT SIGBUS SIGPIPE SIGTERM
-(umask 077 && mkdir "$TEMPDIR") || exit 1
cd "$TEMPDIR" || exit 1
# The alternative location for fonts. The directory need not exist,
@@ -69,6 +76,11 @@ if test -z "$MT_VARTEXFONTS"; then
echo "$0: VARTEXFONTS is not defined. Defaulting to \`$KPSE_DOT'." >&2
MT_VARTEXFONTS='$KPSE_DOT'
fi
+: ${MT_TEXMFVAR=`kpsewhich --expand-var='$TEXMFVAR' | sed 's%^!!%%'`}
+if test -z "$MT_TEXMFVAR"; then
+ echo "$0: TEXMFVAR is not defined. Defaulting to \`$KPSE_DOT'." >&2
+ MT_TEXMFVAR='$KPSE_DOT'
+fi
# The supporting scripts:
: ${MT_MKTEXNAM=`kpsewhich --format='web2c files' mktexnam`}
@@ -109,9 +121,18 @@ fi
: ${MAG=1.0}
: ${ps_to_pk=gsftopk} # some prefer ps2pk
-# Allow fonts to be read and written (especially in case we make
-# directories) by everyone.
-umask 0
+case ":${MT_FEATURES}:" in
+*:varfonts:*)
+ if test -w "$MT_VARTEXFONTS" ; then
+ # Allow fonts to be read and written (especially in case we make
+ # directories) by everyone.
+ umask 0
+ else
+ umask 022
+ MT_VARTEXFONTS=$HOME/.cache/texmf/fonts
+ test -d $MT_VARTEXFONTS || mkdir -p $MT_VARTEXFONTS
+ fi
+esac
# Cache values that may be useful for recursive calls.
export MT_MKTEX_OPT MT_MKTEX_CNF
--- texmf-dist/web2c/texmf.cnf
+++ texmf-dist/web2c/texmf.cnf 2023-03-23 08:35:53.138983942 +0000
@@ -65,20 +65,20 @@ TEXMFROOT = $SELFAUTOPARENT
% They must must all have the TDS directory structure (https://tug.org/tds).
% The main tree of distributed packages and programs:
-TEXMFDIST = $TEXMFROOT/texmf-dist
+TEXMFDIST = /usr/share/texmf
% We used to have a separate /texmf tree with some core programs and files.
% Keep the variable name.
TEXMFMAIN = $TEXMFDIST
% Local additions to the distribution trees.
-TEXMFLOCAL = $SELFAUTOGRANDPARENT/texmf-local
+TEXMFLOCAL = /usr/local/share/texmf
% TEXMFSYSVAR, where *-sys store cached runtime data.
-TEXMFSYSVAR = $TEXMFROOT/texmf-var
+TEXMFSYSVAR = /var/lib/texmf
% TEXMFSYSCONFIG, where *-sys store configuration data.
-TEXMFSYSCONFIG = $TEXMFROOT/texmf-config
+TEXMFSYSCONFIG = /etc/texmf
% Per-user texmf tree(s) -- organized per the TDS, as usual. To define
% more than one per-user tree, set this to a list of directories in
@@ -87,10 +87,10 @@ TEXMFSYSCONFIG = $TEXMFROOT/texmf-config
TEXMFHOME = ~/texmf
% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
-TEXMFVAR = ~/.texlive2024/texmf-var
+TEXMFVAR = ${TEXMFSYSVAR}
% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
-TEXMFCONFIG = ~/.texlive2024/texmf-config
+TEXMFCONFIG = ${TEXMFSYSCONFIG}
% This is the value manipulated by tlmgr's auxtrees subcommand in the
% root texmf.cnf. Kpathsea warns about a literally empty string for a
@@ -111,7 +111,7 @@ TEXMFAUXTREES = {}
% The odd-looking $TEXMFAUXTREES$TEXMF... construct is so that if no auxtree
% is defined (99% common case), no extra elements will be added to
% the search paths. tlmgr takes care to end any value with a trailing comma.
-TEXMF = {$TEXMFAUXTREES$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFDIST}
+TEXMF = {$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFLOCAL,!!$TEXMFDIST}
% Where to look for, and where mktexlsr creates, ls-R files. By default,
% this is all and only the !! elements of TEXMF, so that mktexlsr does not
@@ -119,24 +119,23 @@ TEXMF = {$TEXMFAUXTREES$TEXMFCONFIG,$TEX
% present, it will be used, and the disk will not (usually) be searched,
% regardless of !!. Although in theory a directory listed here need
% not contain an ls-R file, in practice they all should.
-TEXMFDBS = {!!$TEXMFLOCAL,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFDIST}
+TEXMFDBS = $TEXMF;$VARTEXFONTS;$HOMECACHE
% The system trees. These are the trees that are shared by all users.
% If a tree appears in this list, the mktex* scripts will use
% VARTEXFONTS for generated files, if the original tree isn't writable;
% otherwise the current working directory is used.
-SYSTEXMF = $TEXMFSYSVAR;$TEXMFLOCAL;$TEXMFDIST
+SYSTEXMF = $TEXMFSYSCONFIG;$TEXMFSYSVAR;$TEXMFLOCAL;$TEXMFDIST
% First writable tree here is used by Lua(La)TeX for the font cache.
% LuaLaTeX uses the value here, while ConTeXt uses the same variable but
% from texmfcnf.lua; therefore the two values should be kept in sync.
% (As should everything else in texmf.cnf <-> texmfcnf.lua.)
-TEXMFCACHE = $TEXMFSYSVAR;$TEXMFVAR
+TEXMFCACHE = $TEXMFSYSVAR;$TEXMFVAR;$HOMECACHE
% Where generated fonts may be written. This tree is used when the sources
% were found in a system tree and either that tree wasn't writable, or the
% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
-VARTEXFONTS = $TEXMFVAR/fonts
% On some systems, there will be a system tree which contains all the font
% files that may be created as well as the formats. For example
@@ -147,7 +146,8 @@ VARTEXFONTS = $TEXMFVAR/fonts
%
% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
% one of the TEXMF directories (avoids overlapping ls-R files).
-
+VARTEXFONTS = /var/cache/texmf/fonts
+HOMECACHE = ${HOME}/.cache/texmf/fonts
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Usually you will not need to edit any of the following variables.
@@ -155,7 +155,7 @@ VARTEXFONTS = $TEXMFVAR/fonts
% WEB2C is for Web2C specific files. The current directory may not be
% a good place to look for them.
-WEB2C = $TEXMF/web2c
+WEB2C = ${TEXMFHOME}/web2c;${TEXMFSYSCONFIG}/web2c;${TEXMFSYSVAR}/web2c;$TEXMF/web2c
% This variable exists only to be redefined; it is used in nearly all
% search paths. If a document has source files not only in the current
@@ -309,7 +309,7 @@ TEXINPUTS.frpdftex = $TEXMFDOTDIR;$
TEXINPUTS = $TEXMFDOTDIR;$TEXMF/tex/{$progname,generic,latex,}//
% Metafont, MetaPost inputs.
-MFINPUTS = $TEXMFDOTDIR;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
+MFINPUTS = $TEXMFDOTDIR;$TEXMF/metafont//;{$TEXMF/fonts,$HOMECACHE,$VARTEXFONTS}/source//
MPINPUTS = $TEXMFDOTDIR;$TEXMF/metapost//
% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
@@ -319,31 +319,31 @@ MPINPUTS = $TEXMFDOTDIR;$TEXMF/metapost/
% We repeat the same definition three times because of the way fmtutil
% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
% will not be found.
-TEXFORMATS = $TEXMFDOTDIR;$TEXMF/web2c{/$engine,}
-MFBASES = $TEXMFDOTDIR;$TEXMF/web2c{/$engine,}
-MPMEMS = $TEXMFDOTDIR;$TEXMF/web2c{/$engine,}
+TEXFORMATS = $TEXMFDOTDIR;$TEXMF/web2c{/$engine,}//
+MFBASES = $TEXMFDOTDIR;$TEXMF/web2c{/$engine,}//
+MPMEMS = $TEXMFDOTDIR;$TEXMF/web2c{/$engine,}//
%
% As of 2008, pool files don't exist any more (the strings are compiled
% into the binaries), but just in case something expects to find these:
-TEXPOOL = $TEXMFDOTDIR;$TEXMF/web2c
+TEXPOOL = $TEXMFDOTDIR;$WEB2C
MFPOOL = ${TEXPOOL}
MPPOOL = ${TEXPOOL}
% support the original xdvi. Must come before the generic settings.
-PKFONTS.XDvi = $TEXMFDOTDIR;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
+PKFONTS.XDvi = $TEXMFDOTDIR;$TEXMF/%s;{$HOMECACHE,$VARTEXFONTS}/pk/{%m,modeless}//
VFFONTS.XDvi = $TEXMFDOTDIR;$TEXMF/%s
PSHEADERS.XDvi = $TEXMFDOTDIR;$TEXMF/%q{dvips,fonts/type1}//
TEXPICTS.XDvi = $TEXMFDOTDIR;$TEXMF/%q{dvips,tex}//
% Device-independent font metric files.
VFFONTS = $TEXMFDOTDIR;$TEXMF/fonts/vf//
-TFMFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
+TFMFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$HOMECACHE,$VARTEXFONTS}/tfm//
% The $MAKETEX_MODE below means the drivers will not use a cx font when
% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init
% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual.
% The modeless part guarantees that bitmaps for PostScript fonts are found.
-PKFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
+PKFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$HOMECACHE,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
% Similarly for the GF format, which only remains in existence because
% Metafont outputs it (and MF isn't going to change).
@@ -451,8 +451,8 @@ MPSUPPORT = $TEXMFDOTDIR;$TEXMF/metapost
% For xdvi to find mime.types and .mailcap, if they do not exist in
% ~. These are single directories, not paths.
% (But the default mime.types, at least, may well suffice.)
-MIMELIBDIR = $TEXMFROOT/etc
-MAILCAPLIBDIR = $TEXMFROOT/etc
+MIMELIBDIR = /etc
+MAILCAPLIBDIR = /etc
% Default settings for the fontconfig library as used by the Windows
% versions of xetex/xdvipdfmx. Not used by xetex itself on Unixish systems,
@@ -476,10 +476,10 @@ WEBINPUTS = $TEXMFDOTDIR;$TEXMF/web//
CWEBINPUTS = $TEXMFDOTDIR;$TEXMF/cweb//
% Omega-related fonts and other files.
-OFMFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
-OPLFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$VARTEXFONTS}/opl//
-OVFFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
-OVPFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
+OFMFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$HOMECACHE,$VARTEXFONTS}/{ofm,tfm}//
+OPLFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$HOMECACHE,$VARTEXFONTS}/opl//
+OVFFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$HOMECACHE,$VARTEXFONTS}/{ovf,vf}//
+OVPFONTS = $TEXMFDOTDIR;{$TEXMF/fonts,$HOMECACHE,$VARTEXFONTS}/ovp//
OTPINPUTS = $TEXMFDOTDIR;$TEXMF/omega/otp//
OCPINPUTS = $TEXMFDOTDIR;$TEXMF/omega/ocp//
@@ -575,32 +575,38 @@ RUBYINPUTS = $TEXMFDOTDIR;$TEXMF/scrip
% explicitly list every directory. Arguably more understandable anyway.
%
TEXMFCNF = {\
-$SELFAUTOLOC,\
-$SELFAUTOLOC/share/texmf-local/web2c,\
-$SELFAUTOLOC/share/texmf-dist/web2c,\
-$SELFAUTOLOC/share/texmf/web2c,\
-$SELFAUTOLOC/texmf-local/web2c,\
-$SELFAUTOLOC/texmf-dist/web2c,\
-$SELFAUTOLOC/texmf/web2c,\
-\
-$SELFAUTODIR,\
-$SELFAUTODIR/share/texmf-local/web2c,\
-$SELFAUTODIR/share/texmf-dist/web2c,\
-$SELFAUTODIR/share/texmf/web2c,\
-$SELFAUTODIR/texmf-local/web2c,\
-$SELFAUTODIR/texmf-dist/web2c,\
-$SELFAUTODIR/texmf/web2c,\
-\
-$SELFAUTOGRANDPARENT/texmf-local/web2c,\
-$SELFAUTOPARENT,\
-\
-$SELFAUTOPARENT/share/texmf-local/web2c,\
-$SELFAUTOPARENT/share/texmf-dist/web2c,\
-$SELFAUTOPARENT/share/texmf/web2c,\
-$SELFAUTOPARENT/texmf-local/web2c,\
-$SELFAUTOPARENT/texmf-dist/web2c,\
-$SELFAUTOPARENT/texmf/web2c\
+/etc/texmf,\
+/etc/texmf/web2c,\
+/var/lib/texmf/web2c,\
+/usr/share/texmf/web2c\
}
+%TEXMFCNF = {\
+%$SELFAUTOLOC,\
+%$SELFAUTOLOC/share/texmf-local/web2c,\
+%$SELFAUTOLOC/share/texmf-dist/web2c,\
+%$SELFAUTOLOC/share/texmf/web2c,\
+%$SELFAUTOLOC/texmf-local/web2c,\
+%$SELFAUTOLOC/texmf-dist/web2c,\
+%$SELFAUTOLOC/texmf/web2c,\
+%\
+%$SELFAUTODIR,\
+%$SELFAUTODIR/share/texmf-local/web2c,\
+%$SELFAUTODIR/share/texmf-dist/web2c,\
+%$SELFAUTODIR/share/texmf/web2c,\
+%$SELFAUTODIR/texmf-local/web2c,\
+%$SELFAUTODIR/texmf-dist/web2c,\
+%$SELFAUTODIR/texmf/web2c,\
+%\
+%$SELFAUTOGRANDPARENT/texmf-local/web2c,\
+%$SELFAUTOPARENT,\
+%\
+%$SELFAUTOPARENT/share/texmf-local/web2c,\
+%$SELFAUTOPARENT/share/texmf-dist/web2c,\
+%$SELFAUTOPARENT/share/texmf/web2c,\
+%$SELFAUTOPARENT/texmf-local/web2c,\
+%$SELFAUTOPARENT/texmf-dist/web2c,\
+%$SELFAUTOPARENT/texmf/web2c\
+%}
%
% For reference, here is the old brace-using definition:
%TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
@@ -940,3 +946,34 @@ guess_input_kanji_encoding.mendex = 1
% command_line_encoding = none
% in a texmf.cnf prefered, for example $TEXMFLOCAL/web2c/texmf.cnf.
command_line_encoding = utf-8
+
+% These are xmltex specific
+main_memory.xmltex = 2500000
+param_size.xmltex = 1500
+stack_size.xmltex = 1500
+hash_extra.xmltex = 50000
+string_vacancies.xmltex = 45000
+pool_free.xmltex = 47500
+nest_size.xmltex = 500
+save_size.xmltex = 10000
+pool_size.xmltex = 500000
+max_strings.xmltex = 55000
+
+% These are pdfxmltex specific
+main_memory.pdfxmltex = 2500000
+param_size.pdfxmltex = 1500
+stack_size.pdfxmltex = 1500
+hash_extra.pdfxmltex = 50000
+string_vacancies.pdfxmltex = 45000
+pool_free.pdfxmltex = 47500
+nest_size.pdfxmltex = 500
+save_size.pdfxmltex = 10000
+pool_size.pdfxmltex = 500000
+max_strings.pdfxmltex = 55000
+
+% These are jadetex specific
+main_memory.jadetex = 499999
+hash_extra.jadetex = 25000
+pool_size.jadetex = 500000
+save_size.jadetex = 15000
+
