File rtl_433.changes of Package rtl_433

Overview Repositories Revisions Requests Users Attributes Meta

File rtl_433.changes of Package rtl_433 (Revision 6518297d19dcda041fd7f9f62fe90330)

Currently displaying revision 6518297d19dcda041fd7f9f62fe90330 , Show latest

-------------------------------------------------------------------
Tue Dec 26 01:01:11 UTC 2023 - mardnh@gmx.de

- Update to version 23.11+git20231225.83afc7b4:
  * Add support for Fine Offset WN32B (closes #2303)

-------------------------------------------------------------------
Mon Dec 25 01:00:24 UTC 2023 - mardnh@gmx.de

- Update to version 23.11+git20231224.cf4c74de:
  * Add support for Fine Offset / Ecowitt WH55 water leak sensor (closes #2756)
  * Add support for TechniSat IMETEO X6 and improve Holman-AOK (#2759)

-------------------------------------------------------------------
Sun Dec 24 01:00:24 UTC 2023 - mardnh@gmx.de

- Update to version 23.11+git20231223.f9dc6b88:
  * minor: Improve efergy e2 classic (#2760)

-------------------------------------------------------------------
Fri Dec 22 01:01:09 UTC 2023 - mardnh@gmx.de

- Update to version 23.11+git20231221.57c22d7c:
  * docs: Add SoapySDR note to release (closes #2757)

-------------------------------------------------------------------
Tue Dec 19 01:01:10 UTC 2023 - mardnh@gmx.de

- Update to version 23.11+git20231218.60bdd62d:
  * minor: Remove mention of _inch (#2755)
  * Fix converting inches to mm (#2755)

-------------------------------------------------------------------
Mon Dec 11 21:53:54 UTC 2023 - mardnh@gmx.de

- Update to version 23.11+git20231205.8950dc4:
  * Change rtl_433_mqtt_hass.py to support storm_dist_km from WH31L (#2748)
  * Add channel/button to Acurite-606TX
  * Add Motonet MTX, MarQuant Rain note to Schou-72543 (#2686)
  * docs: Change contrib wording
  * Fix TFA-303151 negative temps (closes #2538)
  * Fix temperature for Bresser 3-in-1 Wind Gauge (closes #2523)
  * minor: Fix indent (cpplint detection) (#2744)
  * minor: Fix shell script as shellcheck suggests (#2743)
  * minor: Apply clang-format on c-code (with pre-commit) as seen in #2740 (#2741)
  * minor: Fix trailing whitespace as seen in #2738 (#2739)
  * minor: Fix end of file endings (#2737)
  * Improve code and annotations for cpplint (#2683)
  * docs: update changelog for 23.11
  * minor: Fix doc spelling, detected with codespell (#2730)
  * minor: Change to async operation in mg_broadcast
  * minor: Fix SO_NOSIGPIPE change (#2729)
  * Change rtl_433_mqtt_hass.py to use moisture class (#2726)
  * Change rtl_433_mqtt_hass.py to add battery_mV (#2725)
  * minor: Add all-zero sanity check to Revolt-NC5462 (closes #2715)
  * Add support for Schou 72543 rain sensor (#2686)
  * minor: Fix to ignore SIGPIPE in handler
  * minor: Fix mongoose SIGPIPE on sockets (closes #2705)
  * minor: Change Static analysis to ignore vdata_make
  * minor: Fix Bresser-Leakage inverted startup flag (#2704)
  * Add support for Bresser Lightning and Bresser Air Quality (#2698)
  * Change Fineoffset-WS90 packet size check (#2702)
  * Add support for Tekelek oil gauge (#2306)
  * minor: Change Static analysis to GCC13.2+ (closes #2700)
  * Fix logging message in HA script (#2696)
  * Add support for Nissan Leaf TPMS (#2536)
  * Add support for Carchet TPMS (#2677)
  * Add Pool/Spa Thermometer PN 7009973 note to Bresser-6in1 (#2689)
  * minor: typos in php example
  * Add php example stream script (closes #2687)
  * minor: Fix more spelling (codespell upgrade) (#2685)
  * minor: Fix spelling (codespell) (#2684)
  * minor: Fix shell script formatting enhancing readability (#2681)
  * minor: Fix use of xor token (#2682)
  * minor: Fix spelling (identified with codespell) (#2680)
  * minor: Clean up style in Bresser-leakage
  * Add support for Bresser water leakage sensor PN: 7009975 (#2590)
  * minor: Add static analysis exceptions
  * minor: Add GCC Static analysis (closes #1372)
  * minor: Remove ci helper from root dir
  * Add checksum and battery_ok to WEC-2103 (#2662)
  * minor: Fix data_tag macro include
  * Change conf dir defaults to just SYSCONFDIR (closes #2660)
  * Change verbosity of Protocols Registered output (closes #1700)
  * Change example conf file to use defaults (#2670)
  * Change version number to exclude nightly tag
  * Add support for discovering Govee water sensors to rtl_433_mqtt_hass (#2605)
  * minor: Fix rtltcp disabled prototype
  * minor: Clean up EezTire-E618 code style
  * Change EezTire-E618 checksum, include flags (#2664)
  * minor: add channel note to Oregon Scientific (closes #2665)
  * minor: update docs
  * Change startup help text to the actual help page (#2659)
  * Improve some strcpy strncpy to snprintf
  * Improve all plain sprintf to snprintf
  * Fix Somfy-IOHC length check (closes #2655)
  * Change help texts to print to stdout (closes #2542)
  * Add warning if firewall blocks loopback (closes #2621)
  * minor: Fix _POSIX_HOST_NAME_MAX for gcc-13
  * Add standardized detect key for Govee-Water (#2625)
  * doc: Add rtl_sdr driver pointer

-------------------------------------------------------------------
Sat Sep 30 00:00:57 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230929.72c0f21b:
  * minor: Fix _POSIX_HOST_NAME_MAX for gcc-13

-------------------------------------------------------------------
Thu Sep 28 00:00:52 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230927.02724080:
  * Add standardized detect key for Govee-Water (#2625)

-------------------------------------------------------------------
Wed Sep 27 00:00:50 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230926.8e2be252:
  * minor: Clean up Oregon Scientific code style
  * Fix Oregon Scientific channel renumbering, BREAKING change to THN132N channel 3 (closes #2033)
  * minor: Fix possible NULL param in data_output_mqtt_create
  * doc: Add rtl_sdr driver pointer
  * Change MQTT client ID to contain all params (closes #1129)

-------------------------------------------------------------------
Tue Sep 26 00:00:51 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230925.07368e73:
  * Fix Honeywell-CM921 temperature msg (closes #2637)
  * Add Lidl Auriol 4-LD6313 and 4-LD5972 temperature/rain sensor (#2633)

-------------------------------------------------------------------
Thu Sep 21 00:00:50 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230920.76423bcc:
  * Add support for newer Chuango DWC-102 close command (closes #2630)
  * minor: Improve MQTT warning message (closes #2629)

-------------------------------------------------------------------
Wed Sep 20 00:00:48 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230919.36f64184:
  * minor: Remove deprecated newmodel from HA script docs (#2628)
  * Improve HA script with current class (#2626)

-------------------------------------------------------------------
Tue Sep 19 00:00:47 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230918.582af769:
  * Improve handling of units within HA UI (#2624)

-------------------------------------------------------------------
Sun Sep 17 00:00:29 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230821.70d84d01:
  * Improve HA script with detailed units (#2607)
  * Fix HA script allow list id typo (#2602)
  * Fix Fineoffset-WH1050 return value (closes #2600)
  * build: Change to softprops/action-gh-release
  * minor: Clean up Thermopro-TX2C unused code
  * Fix Inkbird-ITH20R battery_ok key and range (#2596)
  * Fix HA script remove device name from entities (#2594)
  * Fix HA script topics (#2593)
  * Fix malformed json on empty row print (#2588)
  * Fix Ecowitt-WS90 extra data output (#2585)
  * Add description of startup bit to Bresser-5in1 (#2583)
  * Fix various spelling (#2579)
  * Add support for TFA Stratos 30.3151 and improve Fineoffset WH1050 (#2549)
  * Add lower temp bounds to Acurite-5n1, Acurite-Atlas (#2571)
  * Add humidity_1, humidity_2 to rtl_433_mqtt_hass (#2567)
  * Add timestamp to logs in rtl_433_mqtt_hass (#2566)
  * Fix HASS script rain_rate_mm_h typo (#2565)
  * Add decoder conf for PHOX garage gate opener (#2560)
  * docs: Fix bad URL in rtl_433_mqtt_hass.py (#2553)
  * Add support for IROX ETS69 to Ewig Emos-TTX201 (#2547)
  * minor: Fix docs for quit/hop on event (closes #1105)
  * Fix Eurochron-EFTH800 radio_clock hour decoding (#2526)
  * Change Fineoffset-WS90 to add firmware version (#2517)
  * Change ThermoPro TX-2C to enable humidity (#2514)
  * minor: Add log output to pulse analyzer (closes #2509)
  * Add decoder conf for Driveway alarm motion sensor I8-W1901 (#2493)
  * minor: Style updates to Fineoffset-WH1050
  * Add radio clock to Fineoffset-WH1050 (#2463)
  * Add battery voltage to EcoWitt-WH40 (#2488)
  * mionor: Style updates to ThermoPro
  * minor: Clean up Thermopro-TX2C
  * Add support for ThermoPro TX-2C (#2466)
  * minor: Update docs
  * Change EMOS-E6016 wind speed and battery  (closes #2484)
  * Improve Holman ws5029, Add support for AOK-5056 and correction for Emax (#2419)
  * Add support for Fineoffset WS90 (#2448)
  * minor: Fix SoapySDR exit/join ordering
  * Fix current frequency and sample rate info (closes #2468)
  * minor: Fix Windows Legacy Console mode term colors
  * Change rtl_433_mqtt_hass to enable passing custom topics (PR #2289)
  * Add support for Acurite 592TX (closes #2457)
  * minor: Fix path param on output option
  * Add extra digit to Oregon Scientific for AWR129 (#2446)
  * Add support for Oregon Scientific AWR129 BBQ thermometer (#2439)
  * minor: Change data_t to align optimal
  * minor: Fix free http_server_context on stop
  * minor: Clean up Intertechno-Remote code style
  * minor: Change rtlsdr_find_tuner_gain to stack memory
  * minor: Fix unaligned address, heap overflow in data array print
  * Change Acurite 896 rain gauge to default enabled (#2430)
  * Change CM160 output to double (#2428)
  * Fix CM160 energy calculation factor (#2427)
  * Change r_device.fields to constant pointer (#2421)
  * minor: Fix CM160 current amps reading
  * Add total energy kWh to CM160 readings (#2418)
  * Fix Fitipower FC0012 gain quirk (#2417)
  * minor: Change pulse_data print to const
  * minor: Fix Reolink doorbell timings
  * Add decoder conf for Reolink doorbell (closes #2277)
  * minor: Fix strcasecmp compat
  * minor: Update docs
  * Add unlockable rtl_tcp control (#2412)
  * Add restartable SDR device (#2411)
  * Change to async SDR acquire thread (#1978)
  * minor: Fix Celsia-CZC1 typo
  * minor: Change to warn on extra output args
  * Change to second Ctrl-C is a hard abort
  * minor: Fix end of logging
  * minor: Clean up Celsia-CZC1 style
  * Add support for Celsia CZC1 (#2391)
  * Fix rtl_tcp for slow send buffers
  * minor: Change Baldr-Rain to default disabled
  * minor: Fix Baldr-Rain rain factor
  * Add support for Baldr/Rainpoint rain gauge (closes #2394)
  * minor: Fix docs
  * Add decoder conf for SWETUP garage door remote (#2403)
  * Fix: LibreSSL PSK error (closes #1569)
  * Fix Oil-SonicAdv missing messages
  * minor: Update docs, style EezTire-E618
  * Add support for EezTire-E618 TPMS10ATC (#2387)
  * Fix LaCrosse-R1/LaCrosse-R3 rain value (closes #2313)
  * minor: change device lookup output
  * docs: add example to release readme

-------------------------------------------------------------------
Tue Feb 21 01:00:56 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230220.371ccfd5:
  * Add char const check to symbolizer (#2390)

-------------------------------------------------------------------
Mon Feb 20 01:00:28 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230219.af48932a:
  * build: Add MinGW-W64 build notes
  * minor: Update docs
  * Add support for LaCrosse TX31U-IT (#2386)

-------------------------------------------------------------------
Fri Feb 17 01:00:54 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230216.de9654f4:
  * minor: Clean up Revolt-NC5462
  * Add support for Revolt Energy Monitor NC-5462 (#2361)
  * Fix flowis protocol decoding, alarm and back flow parameters.

-------------------------------------------------------------------
Thu Feb 16 01:00:49 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230215.fcdf538c:
  * Add support for Emax EM3551H with Gust without UV/Lux to Emax-W6 (#2376)
  * Change literals to string const for strict discarded-qualifiers warnings (#2379)

-------------------------------------------------------------------
Tue Feb 14 01:00:49 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230213.53859a34:
  * minor: Fix whitespace style

-------------------------------------------------------------------
Mon Feb 13 01:00:30 UTC 2023 - mardnh@gmx.de

- Update to version nightly+git20230212.13849aac:
  * build: Add manual nightly release builds
  * build: Fix OpenSSL discovery on Win32
  * Add Schrader 3039 TPMS for Infiniti Nissan Renault note to Schrader-SMD3MA4

-------------------------------------------------------------------
Sun Feb 12 01:00:27 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230211.e4157bf4:
  * Add support for Wireless M-Bus Mode T Downlink (#2366)
  * Revert support for Interlogix Smoke Detector and Pet Immune SAW PIR Motion Sensor (#2287)

-------------------------------------------------------------------
Sat Feb 11 01:00:43 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230210.17fe8254:
  * Fix Emax units (#2374)

-------------------------------------------------------------------
Fri Feb 10 01:00:44 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230209.48157f6a:
  * minor: Update Cardin-S466

-------------------------------------------------------------------
Wed Feb 08 01:00:42 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230207.416d6c4f:
  * minor: Add RTL-SDR settings option help
  * Add TLS debug info for influxs and mqtts

-------------------------------------------------------------------
Tue Feb 07 01:00:42 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230206.78726870:
  * minor: Add Kingspan Watchman Sonic Plus note
  * Fix Emax LUX decoding (#2346)

-------------------------------------------------------------------
Sun Feb 05 01:00:27 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230205.31dc48ca:
  * Fix Vauno-EN8822C false positives (closes #2364)
  * Add Flowis protocol decoder (#2357)
  * Add Wireless M-Bus, Mode T Downlink (#2366)
  * Add support for Gasmate-BA1008 (#2359)
  * minor: Fix Oil-Ultrasonic mic key
  * Add support for Oil-SonicSmart (#2279)
  * Fix GEO-minim matching, BREAKING change to id field (closes #2363)
  * Fix out-of-bounds in Klimalogg-Pro (#2362)

-------------------------------------------------------------------
Sat Feb 04 01:00:30 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230203.b57a894f:
  * minor: Change Eurochron-EFTH800 radio_clock to optional

-------------------------------------------------------------------
Fri Feb 03 01:00:34 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230202.425726f8:
  * Fix Somfy-RTS for wrong bitrate (closes #2356)

-------------------------------------------------------------------
Wed Feb 01 01:00:44 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230131.cc6f4521:
  * Change all r_device declarations to const (#2352)
  * Fix pointer restrict for C++ compilers (#2351)

-------------------------------------------------------------------
Tue Jan 31 01:00:43 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230130.3597af82:
  * minor: Add Bresser 5CH note to Hideki-TS04

-------------------------------------------------------------------
Sun Jan 29 01:00:37 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230125.4968419b:
  * Add support for Watchman Sonic Advanced / Plus decoder (#2323)
  * Add support for CED7000 timer (#2319)
  * Fix TFA-141504v2 decoder length check (#2339)
  * minor: Fix Digitech-XC0324 rebrand name FT005TH
  * Add radio clock decode to Eurochron-EFTH800 (#2331)
  * minor: Update docs
  * Add support for Emax Weather Sensor, improves Altronics X7064 sensor (#2300)
  * minor: Clean up TFA-141504v2
  * Add support for TFA Dostmann 14.1504 Radio-controlled grill and meat thermometer (#2296)
  * minor: Clean up Govee-Water
  * Add support for new revision of Govee H5054 water leak detector (#2273)
  * minor: Add Vauno-EN8822C rebrand note (closes #2294)
  * minor: Clean up Somfy-IOHC
  * Change Somfy-IOHC to recognize more messages (#2258)
  * minor: Clean up Vauno-EN8822C
  * Add support for Vauno EN8822C (#2231)
  * Change Inkbird-ITH20R temperature2_C to temperature_2_C BREAKING CHANGE (closes #2220)
  * minor: Clean up WEC-2103
  * Add support for WEC-2103 temperature/humidity sensor (#2185)
  * minor: Clean up Neptune R900
  * Add support for Neptune R900 flow meters (#2180)
  * minor: Clean up SRSmith SRS-2C-TX Pool Remote Control
  * Add support for SRSmith SRS-2C-TX Pool Remote Control (#2147)
  * Fix Oregon Scientific negative temp, add BCD sanity checks (#2086)
  * Add ESIC/SCMplus fields to rtl_433_mqtt_hass (#2114)
  * minor: Update docs
  * Add support for Kia Rio III (UB) and Hyundai TPMS sensors (#2083)
  * Add decoder conf for ELRO AB440 remote (closes #2066)
  * Add support for TyreGuard 400 TPMS (#1976)
  * minor: Clean up Geo-minim
  * Add support for GEO minim+ energy monitor (#1970)
  * Change LaCrosse TX invalid humidity handling (#2335)
  * minor: Update docs

-------------------------------------------------------------------
Tue Jan 17 01:00:53 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230116.d287cfb7:
  * Fix json keys for wmbus to be unique (#2316)

-------------------------------------------------------------------
Sat Jan 14 01:00:26 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230113.a95da780:
  * Fix Bresser-ProRainGauge rain digits (#2312)
  * minor: Fix MSVC build (#2310)

-------------------------------------------------------------------
Thu Jan 12 01:01:03 UTC 2023 - mardnh@gmx.de

- Update to version 22.11+git20230111.2cd5623c:
  * Fix light reading on Cotech-367959 when no sensor installed (#2305)
  * Fix HCS200 serial ID decoding (#2308)

-------------------------------------------------------------------
Sat Dec 31 01:00:54 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221230.b605a3d2:
  * Add support for Interlogix Smoke Detector and Pet Immune SAW PIR Motion Sensor (#2287)

-------------------------------------------------------------------
Thu Dec 29 01:00:55 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221228.083dcca4:
  * build: support incremental do_sysroot builds
  * build: Fix CMake pkg-config openssl use
  * Add TLS options to InfluxDB output

-------------------------------------------------------------------
Wed Dec 28 01:00:59 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221227.707b51ec:
  * minor: Fix mongoose build without threads (#2291)
  * build: Fix CMake to use pkg-config openssl when possible (#2290)

-------------------------------------------------------------------
Sat Dec 24 01:00:58 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221223.7d512978:
  * Add log output, log redirect, colored KV log (#2254)
  * minor: Change Digitech-XC0324 to default enabled

-------------------------------------------------------------------
Wed Dec 21 01:00:52 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221220.616b5d5e:
  * Add support for longer EFTH800 messages (#2278)

-------------------------------------------------------------------
Tue Dec 20 01:00:57 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221219.0ff72473:
  * Add output log level options (#2282)

-------------------------------------------------------------------
Mon Dec 19 01:00:31 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221218.d3122264:
  * Add ANSI colors for Windows 10 (#2280)

-------------------------------------------------------------------
Sun Dec 18 01:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221217.46491d3b:
  * minor: Add EcoWitt, FineOffset, Govee device notes
  * minor: Fix pthread_cancel compat

-------------------------------------------------------------------
Sat Dec 10 01:00:51 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221210.dc95819b:
  * Fix to use pthread compat on WIN32 always

-------------------------------------------------------------------
Fri Dec 09 01:00:49 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221208.68a9c9df:
  * Fix battery flag in AmbientWeather-WH31E/WH31B (closes #2272)

-------------------------------------------------------------------
Thu Dec 08 01:00:49 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221207.58593172:
  * Change more fprintf to log prints

-------------------------------------------------------------------
Tue Dec 06 01:00:55 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221205.686d9967:
  * minor: Clean up some fprintf in decoders

-------------------------------------------------------------------
Mon Dec 05 01:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221204.1367b8c6:
  * minor: Add Bresser T/H 7 Channel note to Bresser-6in1 (closes #2269)
  * minor: Update to use top-level output print
  * minor: Change data output flush to print wrapper
  * Change fprintf to log prints (#2266)
  * Change verbosity to match log level (#2264)
  * Add basic logger (#2263)

-------------------------------------------------------------------
Sun Dec 04 01:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221203.dcf34b79:
  * minor: Change to lower verbosity on some debug output

-------------------------------------------------------------------
Fri Dec 02 01:00:51 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221201.24c2a2ba:
  * minor: Change bitbuffer_print to deprected

-------------------------------------------------------------------
Wed Nov 30 01:00:50 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221129.6e1f1202:
  * Fix JSON output string escaping
  * minor: Change decoder_output calls to decoder_log

-------------------------------------------------------------------
Tue Nov 29 01:00:52 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221128.1ec8248a:
  * Add decoder conf for xmas tree remote 2APJZ-CW002 (#2250)
  * Add decoder conf for GE Smartremote Plus (#2249)

-------------------------------------------------------------------
Wed Nov 23 01:00:55 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221121.d4c0e626:
  * build: Update Actions workflows

-------------------------------------------------------------------
Tue Nov 22 01:00:41 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221121.fca5408b:
  * minor: Add Misol WS2320 note to Fineoffset WH65B (closes #2039)

-------------------------------------------------------------------
Mon Nov 21 01:00:42 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221120.94d7b693:
  * Fix Win32 thread calling convention
  * Add decode_dm flex option (closes #2241)

-------------------------------------------------------------------
Sun Nov 20 01:00:42 UTC 2022 - mardnh@gmx.de

- Update to version 22.11+git20221119.e67a9f58:
  * minor: Fix Mongoose deprecated function prototype
  * docs: update changelog for 22.11

-------------------------------------------------------------------
Tue Nov 15 01:00:46 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20221114.1aa49c04:
  * Fix deprecated function prototypes
  * Add note regarding WH51 915MHz decoding (#2236)

-------------------------------------------------------------------
Fri Nov 11 01:00:41 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20221110.2e3032d2:
  * docs: add flex getter example
  * Add links to mqtt device automation docs
  * Publish secret knocks as device automations
  * Add time, channel, and button device automation triggers

-------------------------------------------------------------------
Wed Oct 26 00:00:43 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20221025.eee869e7:
  * Improve false positives for acurite_01185m (#2214)

-------------------------------------------------------------------
Sat Oct 22 00:00:44 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20221021.5f76eae6:
  * Change rtl_433_mqtt_hass rain value template round to two digits (#2210)

-------------------------------------------------------------------
Fri Oct 21 00:00:46 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20221020.83550884:
  * Change rtl_433_mqtt_hass value templates round to one digit (#2209)
  * Fix Chuango devices with some zeroes in their ID (#2205)

-------------------------------------------------------------------
Sun Sep 25 00:00:26 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220924.e066b669:
  * docs: Update meta time example (#2187)

-------------------------------------------------------------------
Wed Sep 21 00:00:29 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220920.73f5a846:
  * minor: Cleanup LaCrosse-TX style, add TFA 30.3121 note

-------------------------------------------------------------------
Tue Sep 20 00:00:40 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220919.51745961:
  * minor: Fix Cavius-Security messages if batt_low (see #1648)
  * minor: Cleanup pulse_detect code style
  * minor: Refactor code for pulse_data
  * minor: Cleanup style for pulse_detect_fsk

-------------------------------------------------------------------
Sun Sep 18 00:00:49 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220917.e3b91622:
  * Changed Proove/Nexa/Kaku to support Smartwares SH4-90152 (closes #2174)
  * Changed Acurite TXR decoder to improve validation (#2162)

-------------------------------------------------------------------
Sat Sep 17 00:00:43 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220916.28aac263:
  * minor: Add notes to Cotech-367959 (#2173)

-------------------------------------------------------------------
Thu Sep 15 00:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220914.2f5fac3d:
  * Fix Efergy-e2CT current above 53 Amp (closes #2166)

-------------------------------------------------------------------
Fri Sep 02 00:00:40 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220901.15637a2f:
  * minor: Fix various decoder doc comments
  * minor: Fix channel formating for LaCrosse-TX141

-------------------------------------------------------------------
Thu Sep 01 00:00:41 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220901.9ed25184:
  * minor: Fix symbolizer file/line location

-------------------------------------------------------------------
Wed Aug 31 00:00:40 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220830.44d5b006:
  * Add sanity check to Ambient Weather F007th (#2155)

-------------------------------------------------------------------
Sun Aug 28 00:00:41 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220827.e8ec15e6:
  * Add decode symbol helper and flex option (#2161)
  * minor: Update docs on LaCrosse-TX141THBv2

-------------------------------------------------------------------
Tue Aug 23 00:00:43 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220822.963adb78:
  * minor: Fix reject short messages for Acurite-Rain899 (#2116)
  * minor: Fix emos_e6016 reset limit (#2156)
  * minor: Fix rtl_433_mqtt_hass for events without id

-------------------------------------------------------------------
Sun Aug 14 00:00:36 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220813.b1e39852:
  * build: Update Actions environment

-------------------------------------------------------------------
Sat Aug 13 00:00:41 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220812.8c7806b8:
  * minor: Add received-header to ook dumps

-------------------------------------------------------------------
Fri Aug 12 00:00:34 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220811.dcbc12f9:
  * minor: Add Bresser Soil note (closes #2146)

-------------------------------------------------------------------
Tue Aug 09 00:00:32 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220808.9c53fa08:
  * Add support for Badger ORION water meter (#2089)

-------------------------------------------------------------------
Mon Aug 08 00:00:39 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220807.eee45de1:
  * Add InFactory PT-310 support to Rubicson (#2123)

-------------------------------------------------------------------
Sun Aug 07 00:00:31 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220806.cd90897b:
  * Add support for Rubicson pool thermometer 48942 (#2137)
  * Add support for Fine Offset WN34 temperature sensor (#2122)
  * Add support for KS200/KS300 to ELV WS2000 (closes #2103)
  * Add support for Maverick XR-30 (#2090)
  * Add sgooway door detector decoder conf (#1707)

-------------------------------------------------------------------
Fri Aug 05 00:00:36 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220804.300fcc3b:
  * minor: Fix missing WSAStartup in rtl_tcp pass-through

-------------------------------------------------------------------
Wed Aug 03 00:00:35 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220802.34d6eb4c:
  * docs: Add Getting Started

-------------------------------------------------------------------
Fri Jul 29 00:00:35 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220728.9d2e0b7f:
  * Add HTTP API example scripts
  * examples/rtl_433_mqtt_relay: Comment and support MQTT security
  * examples: Use /bin/sh instead of bash
  * examples: Greatly extend README.md

-------------------------------------------------------------------
Wed Jul 27 00:00:46 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220726.fc89aab1:
  * Change rain gauge multiplier for Auriol-4LD5661 (#2129)

-------------------------------------------------------------------
Tue Jul 26 00:00:38 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220724.d55292fc:
  * Add ContinentalRemote decoder conf (#2125)
  * docs: Update LINKS.md (#2120)
  * docs: Update to VuePress 2
  * Add CSV names for flex getters with unique mode

-------------------------------------------------------------------
Tue Jul 12 00:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220711.b668f40f:
  * minor: Add TFA 30.3243.02 note (closes #2107)

-------------------------------------------------------------------
Fri Jul 08 00:00:30 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220707.835cfd47:
  * minor: Fix Honeywell-ActivLink ID field

-------------------------------------------------------------------
Wed Jul 06 00:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220705.631f9f85:
  * minor: Update readme with Fine Offset WH45
  * Add support for Fine Offset WH45 air quality sensor

-------------------------------------------------------------------
Sat Jun 25 00:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220624.9cd036e1:
  * Add php example script (closes #2087)

-------------------------------------------------------------------
Mon Jun 20 00:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220619.7304d3fe:
  * minor: Add expire_after option to the mqtt-hass discovery script (#2062)
  * Add Mondeo remote decoder conf (closes #1282)

-------------------------------------------------------------------
Sat Jun 11 00:00:53 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220610.5c17e4e3:
  * minor: Fix ORIA WA50B (closes #2088)

-------------------------------------------------------------------
Thu Jun 09 00:01:30 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220608.cca69d1d:
  * minor: Fix Bresser-6in1 soil sensor UV reading

-------------------------------------------------------------------
Wed Jun 08 00:01:21 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220607.ed37452a:
  * minor: Fix Bresser-6in1 battery vs startup bit
  * minor: Fix Bresser-6in1 soil sensor battery bit (closes #1993)

-------------------------------------------------------------------
Sun Jun 05 00:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220604.f8d98dfd:
  * minor: Fix spelling errors (#2082)

-------------------------------------------------------------------
Thu May 19 00:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220518.8cdb233b:
  * Improve Ford TPMS decoder (#2071)

-------------------------------------------------------------------
Wed May 11 00:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220510.de4f0812:
  * Fix crash when reading a conf file (#2068)

-------------------------------------------------------------------
Fri Apr 29 00:00:36 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220428.9eec4611:
  * Change light_klx to light_lux in Bresser-7in1 (#2061)

-------------------------------------------------------------------
Wed Apr 27 00:00:30 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220425.bb1be7f1:
  * minor: cleanup some float consts

-------------------------------------------------------------------
Mon Apr 25 00:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220424.51271b36:
  * Add support for HCS200/HCS300 based remotes with FSK transmitters (#2052)
  * Remove VS15 project files
  * minor: Fix MSVC build

-------------------------------------------------------------------
Sat Apr 23 00:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220422.f7e4d184:
  * minor: Fix and update Windows build

-------------------------------------------------------------------
Thu Apr 21 00:00:29 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220420.46c9508c:
  * minor: Fix DSC-Security for WS4945 (#2051)

-------------------------------------------------------------------
Tue Apr 12 00:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220411.3428b8a9:
  * minor: Add TLS cert option to the mqtt-hass discovery script (#2043)

-------------------------------------------------------------------
Sat Apr 02 00:00:29 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220401.8228f0d4:
  * minor: Add Bresser-6in1 UV sanity check
  * minor: Add LaCrosse LTV-W2 note (closes #2037)

-------------------------------------------------------------------
Thu Mar 31 00:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220330.3dff3b64:
  * minor: Fix thermopro-tp12 length check (#2034)
  * minor: Clenup Emos E6016 rain gauge (closes #2001)
  * Add support for Emos E6016 Rain Gauge (#2032)

-------------------------------------------------------------------
Wed Mar 30 00:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220329.8e343edc:
  * minor: Fix to hop at interval instead of after
  * minor: remove -G mention from help (closes #2030)

-------------------------------------------------------------------
Mon Mar 28 00:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220327.44e893c0:
  * minor: Fix payload length in RadioHead-ASK (#2027)

-------------------------------------------------------------------
Sun Mar 27 01:00:24 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220326.778b94ca:
  * minor: Cleanup ant-antplus decoder
  * Add support for ANT and ANT+ devices (#2004)
  * Change SDR data buffers to persist valid
  * Add ERT-SCM consumption data to mqtt hass mappings (#2023)
  * Add id filter to mqtt hass (#1988)

-------------------------------------------------------------------
Wed Mar 23 01:00:26 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220322.f4b73f11:
  * minor: Fix Bresser-6in1 UV reading (closes #2013)

-------------------------------------------------------------------
Mon Mar 21 01:00:29 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220320.b28ad702:
  * docs: Update option M docs

-------------------------------------------------------------------
Sat Mar 19 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220318.f380976d:
  * Add LeakDetector decoder conf
  * minor: Add visibility to dynamic lib exports (closes #2010)
  * Fix overflow in Acurite-00275rm (closes #2012)

-------------------------------------------------------------------
Thu Mar 10 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220309.45e8fc54:
  * minor: Add warning to invalid bitbuffer_parse arg in flex or test strings

-------------------------------------------------------------------
Tue Mar 08 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220307.816065d9:
  * docs: Update JSON Data field spec (closes #2005)

-------------------------------------------------------------------
Sat Mar 05 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220304.d123816e:
  * minor: Fix Altronics-X7064 flags

-------------------------------------------------------------------
Fri Mar 04 01:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220303.282051b3:
  * Change the PCM/NRZ/RZ naming
  * Add support for Altronics X7064 sensor (closes #2000)
  * Rename pulse_demod to pulse_slicer

-------------------------------------------------------------------
Thu Mar 03 01:00:27 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220302.8dffa047:
  * Add cmake option to select IPv6 support

-------------------------------------------------------------------
Wed Mar 02 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220301.0a2272b5:
  * Fix EMOS-6016 checksum, add DCF77
  * Add support for EMOS 6016 (#1983)
  * Add bitbuffer_find_repeated_prefix function

-------------------------------------------------------------------
Tue Mar 01 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220228.ca4df453:
  * Fix pulse reset on spurious pulses (closes #1982)
  * minor: Fix rtl_tcp peer print

-------------------------------------------------------------------
Sat Feb 26 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220225.2d041b5d:
  * Remove confusing -G register all option

-------------------------------------------------------------------
Mon Feb 21 01:00:24 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220220.c5007477:
  * Change hass script duplicate dict key 'light_lux' back to 'lux' for legacy reasons (#1989)

-------------------------------------------------------------------
Sat Feb 19 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220218.e15f0f4c:
  * Add Honeywell-cm921 Ticker and Heat Demand commands (closes #1985)

-------------------------------------------------------------------
Sun Feb 13 01:00:24 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220212.5f0ff6db:
  * Change most decoder-verbose to log level
  * Change fprintf in decoders to decoder_log

-------------------------------------------------------------------
Thu Feb 10 01:00:26 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220209.4f524198:
  * Add decoder log to replace bitbuffer bitrow print
  * minor: Cleanup printf format style

-------------------------------------------------------------------
Wed Feb 09 01:00:24 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220208.9fedcf1f:
  * Add decoder log to replace fprintf
  * minor: Cleanup printf code style

-------------------------------------------------------------------
Tue Feb 08 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220207.3e60f9bc:
  * minor: Fix Fineoffset-WS80 MSBs

-------------------------------------------------------------------
Mon Feb 07 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220206.8b559835:
  * Add support for FineOffset WS80 weather station (closes #1965)

-------------------------------------------------------------------
Sun Feb 06 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220205.baafa3b8:
  * Fix Digitech-XC0324 humidity readings (FT-005TH Sensor) (#1971)

-------------------------------------------------------------------
Tue Feb 01 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220131.2b49b81a:
  * minor: Fix Bresser-6in1 missing rain digits (closes #1969)

-------------------------------------------------------------------
Mon Jan 31 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220130.3f800cef:
  * Add rtl_tcp pass-through output (#1915)
  * Add Threads if available
  * minor: Add missing angle bracket to man page (#1967)
  * minor: Update style on Renault-0435R
  * Add support for Renault-0435R TPMS (#1924)

-------------------------------------------------------------------
Sat Jan 29 01:00:24 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220128.f4e2ef5b:
  * Add support for AcuRite 01190 Leak Detector (#1953)
  * minor: Add learn mode to Honeywell-Fan decoder (#1968)

-------------------------------------------------------------------
Fri Jan 28 01:00:24 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220127.badc8152:
  * minor: Fix Maverick ET73 temperature and recognize negative temps (#1966)

-------------------------------------------------------------------
Wed Jan 26 01:00:34 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220125.e2ed6ceb:
  * Add Heatilator-Gas-Log decoder conf (#1963)
  * Add Honeywell-Fan decoder conf (#1962)
  * Revert "Add support for Honeywell ceiling fans (#1955)"

-------------------------------------------------------------------
Tue Jan 25 01:00:29 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220124.6e4f874a:
  * Add support for Honeywell ceiling fans (#1955)
  * minor: Fix overflow in Clipsal-CMR113 and Somfy-IOHC reported by aug5t7
  * Change wt0124 to use additional checksum (#1959)
  * minor: Improve code readability (#1958)
  * docs: Fix documentation for wt0124 to match code (#1957)

-------------------------------------------------------------------
Sun Jan 23 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220122.3a752f16:
  * Add diagnostic entity category to mqtt hass example (#1952)

-------------------------------------------------------------------
Sat Jan 22 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220121.ceba9d4c:
  * minor: Cleanup Regency-Remote style
  * Add support for Regency ceiling fans (#1948)

-------------------------------------------------------------------
Tue Jan 11 01:00:28 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220110.32c1f4a6:
  * docs: Remove MQTT QoS from help (#1938)

-------------------------------------------------------------------
Mon Jan 10 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220109.8c9b4948:
  * minor: Fix decoder data_make indent style
  * minor: Fix decoder indent and whitespace style
  * minor: Fix decoder whitespace style
  * docs: Fix link typos

-------------------------------------------------------------------
Sun Jan 09 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220108.185fe503:
  * minor: Change Funkbus docs (#1935)
  * minor: Fix spelling of "Gira" in Funkbus (#1934)
  * Remove invalid "weather" device class in HASS script (#1584)
  * Add support for Microchip HCS300 KeeLoq remotes BREAKING CHANGE (#1752)
  * Add trigger stream output (#1910)
  * Fix irregular model names BREAKING CHANGE (#1883)
  * docs: Add minor example notes

-------------------------------------------------------------------
Sat Jan 08 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220107.4084ea62:
  * Add support for Yale HSA (#1929)

-------------------------------------------------------------------
Tue Jan 04 01:00:25 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220103.dee91e58:
  * minor: Change HASS MQTT Parameter for Lux (#1930)

-------------------------------------------------------------------
Mon Jan 03 01:00:31 UTC 2022 - mardnh@gmx.de

- Update to version 21.12+git20220102.2d61e072:
  * Add DrivewayAlert decoder conf (#1928)

-------------------------------------------------------------------
Thu Dec 30 01:00:24 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211229.09797e12:
  * minor: Change SimpliSafe-Gen3 to more message lengths
  * Add support for SimpliSafe-Gen3 (#1257)
  * Add GhostControls decoder conf (#1922)

-------------------------------------------------------------------
Wed Dec 29 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211228.9e6c8476:
  * minor: Fix spelling errors (#1920)

-------------------------------------------------------------------
Mon Dec 27 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211226.d55e4ead:
  * minor: Fix Hideki rows return (#1908)
  * minor: Fix __has_attribute for older compilers (#1918)
  * minor: Fix Hideki code indent
  * Change Hideki to accept short sync (#1908)

-------------------------------------------------------------------
Sat Dec 25 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211224.31d2e765:
  * minor: Fix STDERR_FILENO for MSVC
  * minor: Fix a compiler flag needs GCC 7

-------------------------------------------------------------------
Fri Dec 24 01:00:30 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211223.8008da78:
  * minor: Fix usleep for Windows
  * minor: Fix wind_max_km_h key in hass script (#1914)
  * minor: Fix printf in signal handler

-------------------------------------------------------------------
Tue Dec 21 01:00:32 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211220.88e99d97:
  * Add support for AVE TPMS (#1909)

-------------------------------------------------------------------
Sun Dec 19 01:00:24 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211218.bd3afaa6:
  * Add realtime replay option for file inputs
  * minor: Change Ford TPMS temperature to C

-------------------------------------------------------------------
Wed Dec 15 01:00:28 UTC 2021 - mardnh@gmx.de

- Update to version 21.12+git20211214.5e44ab3e:
  * build: Add workflow_dispatch to Release action
  * docs: update changelog for 21.12
  * docs: Add SQL example link (closes #1828)

-------------------------------------------------------------------
Tue Dec 14 01:00:28 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211213.21d7fade:
  * Add support for SmartFire Proflame 2 remote control (closes #1905)

-------------------------------------------------------------------
Mon Dec 13 01:00:31 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211212.9ef75986:
  * minor: Fix moisture to humidity class in hass script (#1903)

-------------------------------------------------------------------
Sat Dec 11 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211210.dcea0814:
  * minor: Clean up LaCrosse-TX34/35-IT
  * Add support for Lacrosse TX34 rain gauge (#1890)
  * minor: Update recommended example conf
  * minor: Clean up Telldus-FT0385R
  * Add support for Telldus-FT0385R (#1841)
  * minor: Clean up Jasco GE Choice Alert
  * Add support for GE Choice Alert wireless alarm sensors (#1768)
  * minor: Clean up bitbuffer_parse truncating

-------------------------------------------------------------------
Fri Dec 10 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211209.40c85959:
  * minor: Fix broken bitbuffer_parse multirow
  * minor: Update TPMS-Porsche pressure scaling
  * Change PCM slicer to measure bit length in more cases (#1897)

-------------------------------------------------------------------
Thu Dec 09 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211208.0d611fb1:
  * minor: Fix Funkbus for other compilers
  * Refactor udp syslog output
  * Refactor file outputs from data
  * minor: Refactor file handle into each output
  * minor: Add flush callback to file outputs

-------------------------------------------------------------------
Wed Dec 08 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211207.556759d9:
  * Add support for Porsche Boxter/Cayman TPMS
  * minor: Update Funkbus code style
  * Add support for Funkbus/Instafunk (#1896)

-------------------------------------------------------------------
Tue Dec 07 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211206.f639a1ea:
  * minor: Fix RfRaw encode pulse width overflow
  * minor: Fix long row print overflow
  * Add CS8 as file input format
  * Add automatic file format detection from filename

-------------------------------------------------------------------
Mon Dec 06 01:00:22 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211205.7fc96b45:
  * Change InfluxDB output of 'mic' from field to tag (#1773)
  * minor: Change Klimalogg code style (see #1884)
  * minor: Fix klimalogg temperature_C format (#1884)
  * Add decoder priority stages (#1895)

-------------------------------------------------------------------
Sat Dec 04 01:00:21 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211203.d72fe229:
  * minor: Fix code style
  * Add support for Truck TPMS (closes #1893)

-------------------------------------------------------------------
Fri Dec 03 01:00:21 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211202.e722fa95:
  * minor: Add Inkbird IBS-P01R note to ITH-20R (closes #1891)
  * minor: Change GE-ColorEffects to more robust preamble

-------------------------------------------------------------------
Sun Nov 28 01:00:23 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211127.20aa5484:
  * minor: Fix HASS value template for battery (#1887)

-------------------------------------------------------------------
Fri Nov 26 01:00:27 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211125.6fdbdfbe:
  * minor: Fix Home Assistant template rounding (#1889)

-------------------------------------------------------------------
Thu Nov 25 01:00:22 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211124.c8527980:
  * minor: Add dB level notes

-------------------------------------------------------------------
Thu Nov 18 01:00:23 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211117.4ca3cb0d:
  * minor: Fix code style in acurite

-------------------------------------------------------------------
Wed Nov 17 01:00:22 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211116.9ddccc01:
  * minor: Add _CRT_NONSTDC_NO_DEPRECATE to vs15 build files (#1878)
  * minor: Fix to set freq,rate,ppm from sdr handler
  * minor: Fix code style in megacode
  * minor: Fix source definitions annotation to match header declarations (#1874)

-------------------------------------------------------------------
Tue Nov 16 01:00:22 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211115.045b444c:
  * Fix: make sure fprintf uses an unsigned marker when an unsigned value is given (#1872)

-------------------------------------------------------------------
Mon Nov 15 01:00:24 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211114.0097048a:
  * minor: Fix cmake modules names
  * docs: add formats and analyze docs

-------------------------------------------------------------------
Sun Nov 14 01:00:22 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211113.a7d4ba5e:
  * minor: Fix fallthrough attribute for other compilers
  * minor: Add Sainlogic WS019T supported note (#1869)
  * minor: Fix stricter compiler warnings
  * docs: Add an example of manual Home Assisant integration (#1868)

-------------------------------------------------------------------
Sat Nov 13 01:00:22 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211112.04cbdbcb:
  * Add RTL_433_REDUCE_STACK_USE to reduce size of bitbuffers (#1863)
  * Fix rainpoint msg buffer must be initialized (#1862)

-------------------------------------------------------------------
Fri Nov 12 01:00:24 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211111.c21d1e13:
  * Fix: Reduce stack use in slicers (#1860)
  * Fix: Windows CreateTimerQueueTimer alarm handle is not valid for CloseHandle (#1859)

-------------------------------------------------------------------
Thu Nov 11 01:00:22 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211110.b5f112da:
  * minor: Add LaCrosse LTV-W1 battery flag
  * Add support for LaCrosse LTV-W1 wind sensor (closes #1855)

-------------------------------------------------------------------
Tue Nov 09 01:00:21 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211108.73a2edb0:
  * Change HASS script to logging (#1851)

-------------------------------------------------------------------
Mon Nov 08 01:00:21 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211107.dad068d9:
  * minor: Fix Auriol-4LD5661 id format (#1850)

-------------------------------------------------------------------
Sat Nov 06 01:00:24 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211105.bfd61a19:
  * docs: add clone note on building

-------------------------------------------------------------------
Sat Oct 30 00:00:23 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211029.4bb75b4c:
  * build: Add symbolizer check
  * minor: Cleanup model token workaround for Flex and holman-ws5029 pcm/pwm
  * minor: Cleanup code style for M-Bus
  * minor: Cleanup WH2 explicit model
  * minor: Cleanup code style

-------------------------------------------------------------------
Fri Oct 29 00:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211028.a06bf818:
  * minor: Update build files for Auriol 4-LD5661
  * Add support for Auriol 4-LD5661 temperature/rain sensor (#1843)

-------------------------------------------------------------------
Sun Oct 24 14:16:20 UTC 2021 - mardnh@gmx.de

- Update to version 21.05+git20211024.b4c5711c:
  * Add support for Linear Megacode Remote (#1834)
  * Add SwitchDocLabs SM23 note
  * Add SwitchDocLabs F016TH note
  * Add SwitchDocLabs FT020T note
  * minor: Fix missing mic in Acurite-986 (closes #1840)
  * Fix Inovalley-kw9015b rain bits (closes #1660)
  * minor: Add FineOffset WH57 note (closes #1818)
  * docs: Add OpenSSL library to build guide (#1836)
  * Add battery_ok to Bresser-_7in1 (#1795)
  * Add HASS long term statistics (#1835)

-------------------------------------------------------------------
Fri Feb 05 01:00:32 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210204:
  * minor: fix Secplus v1 time diff
  * build: add release version info from changelog using cmake
  * minor: fix Secplus v1 printf
  * Add support for Security plus v1 (#1483)

-------------------------------------------------------------------
Wed Feb 03 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210202:
  * build: fix FindLibUSB paths

-------------------------------------------------------------------
Tue Feb 02 01:00:27 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210201:
  * build: minor fix pc subst
  * build: fix libusb-1.0 config
  * minor: fix doc comments
  * Add GPSd tags option (#1636)
  * minor: fix take const in tls_param, atobv, atoiv
  * minor: fix burnhardbbq license to GPLv2+ (#1642)

-------------------------------------------------------------------
Mon Feb 01 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210131:
  * Add FineOffset WH0290 extra fields (#1639)
  * minor: fix use list in well_known_output_fields
  * Fix Hideki Gust speed by Udo Kirsten

-------------------------------------------------------------------
Sun Jan 31 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210130:
  * Add option for multiple data tags
  * build: add OPENSSL build switch for Travis

-------------------------------------------------------------------
Fri Jan 29 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210128:
  * Add optional TLS support to MQTT (closes #1633)
  * Add OpenSSL support for influxs TLS (closes #1569)

-------------------------------------------------------------------
Thu Jan 28 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210127:
  * Minor update Bresser 3CH style
  * Add LaCrosse TX141TH-Bv2 checksum
  * Minor add vararg checks
  * Change rain field format for WS2032
  * Extend decoded values + HCA (#1630)
  * Change battery_ok, rain field for WS2032

-------------------------------------------------------------------
Wed Jan 27 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210126:
  * Show invalid dates as invalid (#1628)
  * Minor fix reduce false positives in BurnhardBBQ
  * Fix mqtt retain on hass script (#1602)

-------------------------------------------------------------------
Tue Jan 26 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210125:
  * Add Skylink HA-434TL motion sensor conf (s.a. #814)

-------------------------------------------------------------------
Mon Jan 25 01:00:29 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210124:
  * Add Bresser 6-in-1, 7-in-1 indoor, new 5-in-1, 3-in-1 note
  * Minor add more pulse meta data

-------------------------------------------------------------------
Sun Jan 24 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210123:
  * build: minor fix VS files
  * Add support for the Burnhard BBQ thermometer (#1624)
  * Add TFA 30.3208.02 note (closes #1622)

-------------------------------------------------------------------
Sat Jan 23 01:00:24 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210122:
  * Add raw pulse printing mode

-------------------------------------------------------------------
Fri Jan 22 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210121:
  * Minor fix network interactivity
  * Add support for parsing timedate in wbus (#1616)

-------------------------------------------------------------------
Tue Jan 19 01:00:30 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210118:
  * Add Battery Level for Fineoffset WH0290 Wireless Air Quality Monitor (#1617)

-------------------------------------------------------------------
Mon Jan 18 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210117:
  * Blueline tweaks and improvements (#1590)
  * Feature/add metrics (#1610)

-------------------------------------------------------------------
Fri Jan 15 01:00:33 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210114:
  * Minor add sanity check from Adam Klva
  * Minor add cs8 output help

-------------------------------------------------------------------
Thu Jan 14 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210113:
  * Change soil moisture to percent display (#1595)

-------------------------------------------------------------------
Sat Jan 09 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210108:
  * Add ATC Technology LMT-430 conf (#1600)

-------------------------------------------------------------------
Wed Jan 06 01:00:25 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210105:
  * Fix buffer length in honeywell (#1598)

-------------------------------------------------------------------
Tue Jan 05 01:00:26 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210105:
  * buffer size error (#1596)

-------------------------------------------------------------------
Mon Jan 04 01:00:29 UTC 2021 - mardnh@gmx.de

- Update to version 20.11+git.20210103:
  * build: add colored build for Ninja
  * Fix FineOffset WH1050 field widths (#1592)

-------------------------------------------------------------------
Thu Dec 24 01:00:33 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201223:
  * Maintainer update for blueline
  * Add support for Blueline PowerCost Monitor
  * Add FAN-53T decoder conf (#1588)

-------------------------------------------------------------------
Wed Dec 16 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201215:
  * Add support for Acurite 515 fridge/freezer sensors (#1579)
  * Removed invalid "weather" device_class (#1548)

-------------------------------------------------------------------
Tue Dec 15 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201214:
  * Fix rtlsdr_read_async() abort on read stall (closes #1581)

-------------------------------------------------------------------
Mon Dec 14 01:00:27 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201213:
  * Fix rtlsdr_set_freq_correction non-error code

-------------------------------------------------------------------
Wed Dec 09 01:00:27 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201208:
  * Add support for UV index and light intensity readings in Cotech (#1575)

-------------------------------------------------------------------
Mon Dec 07 01:00:28 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201206:
  * Fix false positive bug in Nexus (closes #1576)

-------------------------------------------------------------------
Sat Dec 05 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201204:
  * Add support for TelFix-RadioLoop to Somfy (closes #1571)
  * Add Thermostat example conf files with mqtt outputs (#1573)

-------------------------------------------------------------------
Tue Dec 01 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.11+git.20201130:
  * Minor fix add mic to fields in Somfy

-------------------------------------------------------------------
Fri Nov 13 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201112:
  * Improve lacrosse decoders with sanity checks
  * build: merge gh check workflow
  * docs: update changelog for 20.11

-------------------------------------------------------------------
Thu Nov 12 01:00:27 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201111:
  * Add missing LTV-R1 protocol in example config
  * Improve maintainer_update.py script with example file generation
  * Add support for LaCrosse Technology View R1 Rainfall Gauge.
  * Minor fix len check in mg_match_prefix_n
  * build: Minor fix need realpath for Trusty Tar

-------------------------------------------------------------------
Wed Nov 11 01:00:25 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201110:
  * Add http server (#871)
  * Add jsmn json lib
  * Add  support for ECODHOME smart socket (#1544)
  * Minor cleanup descriptive ERT naming

-------------------------------------------------------------------
Tue Nov 10 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201109:
  * Fix Lacrosse-THx hardcoded strings to support data extractor scripts
  * Minor update style and run maintainer update for lacrosse-th2
  * Added support for LaCrosse Technology View TH2 Thermo/Hygro sensor. (#1552)
  * Add stats start time reporting
  * Minor fix sdr unused warning

-------------------------------------------------------------------
Mon Nov 09 01:00:25 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201108:
  * Change to Python 3.6 for Travis
  * Minor fix data_print_jsons_t initializer warning
  * Fix Analyzer FSK/OOK hint (closes #1557)
  * Improve unit tests for bitbuffer with extra assertions
  * Fix UNUSED in term_ctl
  * Minor fix SDR unused-function
  * Remove "http" as "influx" alias

-------------------------------------------------------------------
Sun Nov 08 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201107:
  * Minor cleanup sdr dev check

-------------------------------------------------------------------
Sat Nov 07 01:00:28 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201106:
  * Add arguments and docs to Home Assistant MQTT auto discovery script (#1546)

-------------------------------------------------------------------
Fri Nov 06 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201105:
  * Changed LaCrosse LTV-WR1 to wind_avg_km_h key (#1549)

-------------------------------------------------------------------
Wed Nov 04 01:00:27 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201103:
  * build: enable Wmissing-field-initalizers and fix the warnings
  * build: fix Wunused-but-set-variable warnings for decoders (gcc10 warning)
  * build: Disable Wno-unused and comment out all unused variables
  * build: Disable Wno-unused-parameter and wrap unused params in UNUSED

-------------------------------------------------------------------
Tue Nov 03 01:00:25 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201102:
  * Fix rfraw builder overflow (closes #1539)

-------------------------------------------------------------------
Mon Nov 02 01:00:25 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201101:
  * build: Minor only define noreturn when it's not defined yet
  * Add Dooya Curtain Remote conf (closes #1545)
  * Add SDR loop api

-------------------------------------------------------------------
Sun Nov 01 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201031:
  * Change to sig_atomic_t for sighandler
  * Minor style fix

-------------------------------------------------------------------
Fri Oct 30 01:00:30 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201029:
  * Minor fix SDR leak, change sdr_set_antenna to const
  * Minor change sdr_set_tuner_gain to const
  * Minor fix strncpy termination

-------------------------------------------------------------------
Thu Oct 29 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201029:
  * Fix wmbus csv output parameters
  * Fix flags field for TPMS Jansite (#1538)

-------------------------------------------------------------------
Wed Oct 28 01:00:30 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201027:
  * Minor update example conf
  * Add note for TFA Dostmann 30.3159.IT (#1537)

-------------------------------------------------------------------
Tue Oct 27 01:00:25 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201026:
  * Add SDR runtime settings api
  * Minor fix missing alloc check
  * Change exit async naming
  * Add SDR device info
  * Add support for Bresser 6-in-1, 7-in-1 weather station (#1225)
  * Add support for LaCrosse Technology View TH3 Thermo/Hygro Sensor (#1536)
  * Add support for LaCrosse LTV-WR1 Multi Sensor (#1533)
  * Add support for Nice Flor-s remote (#1526)
  * Change remove DSC subtype key (#1522)
  * Change Acurite subtype key to message_type (#1520)
  * Add support for WH31E RCC packet type (#1528)

-------------------------------------------------------------------
Mon Oct 26 01:00:27 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201025:
  * Minor fix in mongoose connection handling (#1535)
  * Fix wmbus mode S buffer length issue for Lansen meters
  * Refactor output poll to mg_mgr
  * Refactor MQTT and Influx output context from mgr to conn
  * Add SoapySDR to MinGW-w64 build

-------------------------------------------------------------------
Sat Oct 24 19:24:06 UTC 2020 - mardnh@gmx.de

- Update to version 20.02+git.20201023:
  * Added output format option to flex getters (#1532)
  * Minor add verbose option to maintainer_update
  * Add TFA 30.3209 note to Nexus (closes #1516)
  * Add TFA-Dostmann 30.3161 rain scale (closes #1531)
  * Minor update Readme
  * Fix Insteon string overflow
  * Fix missing CSV fields, add a debug check
  * Add named output tag option (closes #1517)
  * Missing comma in #1407, support for MightyMule (#1519)
  * Minor style cleanup Opus XT300

-------------------------------------------------------------------
Fri Jan 31 01:00:25 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200131:
  * Fix for #1114 (#1188)
  * Fix LaCrosse TX145wsdth repeat requirement
  * Add preliminary LaCrosse TX141TH-BV3 support
  * Fix SoapySDR for 0.8 API
  * Fix Auriol AFW2A1 missing check
  * Change flex decode to count as successful output
  * Add Nexus compatible sensor descriptions

-------------------------------------------------------------------
Thu Jan 30 01:00:22 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200129:
  * Improve LaCrosse TX29-IT support (#1279)
  * Add LaCrosse TX145wsdth mic
  * Add LaCrosse TX145wsdth support (closes #1272)

-------------------------------------------------------------------
Wed Jan 29 01:00:20 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200129:
  * Add csv output wmbus mode S
  * Change KNX-RF output to
  * Add support for Lansen wmbus door/window sensor
  * Improve PCM bit period detection
  * Fix OS PCR800 and RGR968 displayed unit name

-------------------------------------------------------------------
Tue Jan 28 01:00:23 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200127:
  * Fix battery_level in Fineoffset-WH51
  * Fix type of battery_mv in Fineoffset-WH51 (#1274)
  * Minor flex warning (closes #1273)

-------------------------------------------------------------------
Mon Jan 27 01:00:21 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200126:
  * Add reflected LFSR util
  * Add support for TFA Drop 30.3233.01 (#1255)
  * Add Auriol AFW2A1 support (#1230)

-------------------------------------------------------------------
Sun Jan 26 01:00:21 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200125:
  * Add 345M to example docs
  * Add some compatible sensor descriptions

-------------------------------------------------------------------
Thu Jan 23 01:00:21 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200122:
  * Add Verisure Alarm config file
  * Fix out of array reads in the wmbus decoder

-------------------------------------------------------------------
Tue Jan 21 01:00:26 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200121:
  * Add wmbus mode S support and KNX RF telegram support.

-------------------------------------------------------------------
Sun Jan 19 01:00:25 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200118:
  * Silence debug message in min/max fsk demodulator

-------------------------------------------------------------------
Fri Jan 17 01:00:24 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200117:
  * Add support for decoding Lansen and Bmeters wmbus based temperature/hygrometers

-------------------------------------------------------------------
Wed Jan 15 01:00:23 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200114:
  * Change min repeat for LaCrosse TX141W (#1213)

-------------------------------------------------------------------
Tue Jan 14 01:00:24 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200114:
  * Add support for decoding wmbus temperature.
  * Add block2 parsing for wmbus

-------------------------------------------------------------------
Mon Jan 13 01:00:21 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200112:
  * Enhance Honeywell 2Gig support
  * Change -a and -G option to discourage usage

-------------------------------------------------------------------
Sun Jan 12 01:00:24 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200111:
  * Add support for WS2032 weather station (#1208)
  * Add timezone offset print option (#1207)
  * Add LaCrosse TX141W support
  * Rename LaCrosse TX141x
  * Clean up LaCrosse-TX code style
  * Add battery level to Fineoffset WH51

-------------------------------------------------------------------
Sat Jan 11 01:00:21 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200110:
  * Update BUILDING.md (#1259)

-------------------------------------------------------------------
Fri Jan 10 01:00:23 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200109:
  * Clean up Archos-TBH code style
  * Add Archos-TBH support (#1199)
  * Add Oregon ID_THGR810a ID_WGR800a version ids (#1258)
  * Minor missing alloc check
  * Improve OWL CM180 support (#1247)

-------------------------------------------------------------------
Thu Jan 09 01:00:24 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200108:
  * wmbus: add script for converting wmbus json to rtlwmbus format
  * Ecowitt WH51
  * Add Holman iWeather WS5029 older PWM (closes #947)
  * Update LED-Light-Remote conf

-------------------------------------------------------------------
Wed Jan 08 01:00:23 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200108:
  * wh51: add mic
  * Added support for FineOffset/ECOWITT WH51 (#1242)
  * config for 21 key remote
  * Add rtlsdr_find_tuner_gain for exact gains

-------------------------------------------------------------------
Tue Jan 07 01:00:21 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200107:
  * -r option example
  * Update README.md
  * Update README.md
  * fineoffset: more heuristics to separate WH65B and WH24

-------------------------------------------------------------------
Sat Jan 04 01:00:27 UTC 2020 - mardnh@gmx.de

- Update to version 19.08+git.20200103:
  * Fix missing csv fields on default disabled

-------------------------------------------------------------------
Tue Dec 31 01:01:33 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191230:
  * Update m_bus.c with device type strings from OMS

-------------------------------------------------------------------
Tue Dec 17 01:00:24 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191216:
  * mbus: add csv output

-------------------------------------------------------------------
Wed Dec 11 01:00:24 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191210:
  * Improve Efergy Optical decoder (#1229)

-------------------------------------------------------------------
Sat Dec 07 01:00:23 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191206:
  * Cleanup minor
  * Cleanup some doc comments
  * Add TX-button to some decoders (closes #1205)

-------------------------------------------------------------------
Wed Dec 04 01:00:22 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191203:
  * Point mqtt example file to new location (#1221)
  * Clean up TFA-Poolthermometer
  * Improvements for TFA pool temperature sensor (#1219)

-------------------------------------------------------------------
Tue Dec 03 01:00:26 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191202:
  * Add pulse analyzer support for read OOK data (#1216)

-------------------------------------------------------------------
Sun Dec 01 01:00:24 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191130:
  * Fix ook input support bug from a9de888 (#1215)

-------------------------------------------------------------------
Tue Nov 26 01:00:22 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191125:
  * Fix missing hop_time when reading file (closes #1211)

-------------------------------------------------------------------
Fri Nov 22 20:35:36 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191121:
  * Fix Acurite 899 rain_mm conversion value (#1203)
  * Fix build files (closes #1201)
  * Cleanup minor warnings
  * Fix minor warnings
  * Update Doxygen
  * Clean up doc comments
  * Add InfluxDB docs
  * Cleanup style minor
  * Cleanup wider type comparison warnings
  * Fix stdbool clash with mongoose.h

-------------------------------------------------------------------
Thu Oct 31 01:00:27 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191031:
  * m-bus: output the complete payload minus crc in the data field
  * fsk: split out fsk pulse detector
  * cleanup: change name of enum to clearer names
  * mbus: add more sensor types
  * mbus: working Mode T decoding
  * Change leftover localtime call to _r/_s
  * Fix bugs from static analysis (#1183)
  * Add InfluxDB relay example script
  * Cleanup minor
  * Fix vdata_make edge cases
  * Refactor global cfg scope
  * Fix overflow warnings from static analysis (#1183)

-------------------------------------------------------------------
Wed Oct 30 01:00:25 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191029:
  * Fix more warnings from static analysis (#1183)
  * Fix some warnings from static analysis (#1183)

-------------------------------------------------------------------
Sat Oct 26 00:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191025:
  * Change Acurite to log only with verbose (#1182)
  * Fix radiohead buffer underflow (#1181)

-------------------------------------------------------------------
Fri Oct 25 00:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191024:
  * Fix range clamping on RSSI (#1179)
  * Fix malicious bitbuffer test string (#1178)
  * Change code to quit on invalid return value decoder (#1180)
  * Fix unaligned sample buffer length (#1177)
  * Minor fix pedantic warnings
  * Fix bad event return value in elantra (#1176)
  * Fix accounting if decoder misbehaves (#1175)
  * fix ge_coloreffects undef behav (#1173)

-------------------------------------------------------------------
Wed Oct 23 00:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191022:
  * Add protocol selection to test bitbuffer input
  * Add streaming test bitbuffers (#1062)

-------------------------------------------------------------------
Tue Oct 22 00:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191021:
  * Fix parsing oversized bitbuffer (#1171)

-------------------------------------------------------------------
Fri Oct 18 09:58:26 UTC 2019 - mardnh@gmx.de

- Update to version 19.08+git.20191017:
  * Add length check for interlogix device and update return codes (#1169)
  * Add preamble check for microchip hcs200 to reduce false positives (#1170)
  * Add const to some char ptrs
  * Add unboxed types for data
  * Add warnings on alloc failure, enforce alloc check style
  * Add alloc checks, fixes #1156
  * Compact doubles in mqtt devices topics
  * Add Auriol-HG02832 support (#1166)
  * Update hints for brew on macOS (#1167)
  * Enhance Honeywell for 2Gig, RE208 (#747)
  * Upgrade Mongoose 6.13+patches to 6.16+patches
  * Fix expand Efergy-e2CT exp range (#1163)
  * Add RTL-SDR error code output
  * Style update and integrate TPMS Elantra
  * Add Hyundai Elantra 2012 TPMS support (#1158)
  * Code style updates for Norgo NGE101
  * Add Norgo NGE101 support (#1042)
  * Convert read OOK pulse_data to current sample rate (#1160)
  * Minor
  * Fix Acurite 899 rain_mm format (#1154)
  * gt_tmbbq05: implement parity check
  * Change GT-WT-03 added checksum (#1149)
  * Update QUIGG GT-TMBBQ-05 with MIC
  * Change GT-TMBBQ-05 added ID, finetuned pulse lengths (#1152)
  * Add Sonoff RM433 conf example (#1150)
  * Add support for Globaltronics GT-WT-03 (#1149)
  * Add support for QUIGG GT-TMBBQ-05 (#1151)
  * Clean up minor model names
  * Add Mongoose source patches
  * Fixes in Mongoose for MSVC debug-mode (-MDd) (#1146)
  * Reorder some keys, normalize some keys (#998)
  * Improve Oregon Scientific V3 preamble match
  * Add support for Oregon Scientific WGR800X (#1045)
  * Add Integration docs
  * Add RRD example script
  * Update README
  * Added 'unique' to example flex decoders (#1138)
  * Fix for CSV output columns to follow the conversion option (#1137)
  * Minor doc fixes
  * Add more docs
  * Add language/systems note
  * Add "unique" output to flex decoder
  * Add "protocol" to MQTT topic tokens
  * Update changelog
  * Add VuePress for docs
  * Reorganize docs
  * Fix missing digit in ESIC-EMT7170
  * Add CurrentCost EnviR support (#1115)
  * Add ESIC-EMT7170 power meter (#1132)
  * Fix Holman-WS5029 sync, style updates
  * Add LaCrosse-TX141Bv3 support (#1134)
  * Add note on libgcc dlls for win32 non-static binary
  * Install man page
  * Add channel to inFactory-TH (#1133)
  * Generate man page
  * Add man page rtl_433.1 (#1121)
  * Minor clean up
  * Add color to console help output
  * Add option help headers
  * Add checksum to Philips AJ7010
  * Clean up stdout+printf in devices; add style check
  * Add support for Philips AJ7010 (#1047)
  * Rename Philips AJ3650 source
  * Update WG-PB12V1 to exclude Fineoffset WH2 collision
  * Force all indent to spaces
  * Remove stray tabs
  * Remove some unreferenced variables (#1130)
  * Add frequency hopping signal support for win32 (#1128)
  * Fix Acurite verbose bitrow print
  * Style update @todo notes in code
  * Add linux binaries to README.md (#1122)
  * Update Schrader type notes
  * cmake: use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR (#1120)
  * Style update for Holman WS5029
  * Add Holman WS5029 decoder
  * Use digest code for Acurite 606
  * Add Acurite Rain 899 support
  * Change pm10_ug_m3 to pm10_0_ug_m3
  * Clean up code style on Acurite
  * Suppress WH31E false positives (as WH32B)
  * Fix parsing of time specification with trailing spaces (#1118)
  * Add more atoi_time tests

-------------------------------------------------------------------
Thu Jul 25 00:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190724:
  * Documentation fixes

-------------------------------------------------------------------
Thu Jul 18 00:01:27 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190717:
  * Add support for Oregon scientific THGR328N and RTGR328N (#1107) (#1109)
  * Output time key in MQTT

-------------------------------------------------------------------
Wed Jul 17 00:00:40 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190716:
  * Fix some typos (#1111)

-------------------------------------------------------------------
Tue Jul 16 00:00:32 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190715:
  * Add frequency hop on USR1 signal
  * Add '-E hop' option
  * Allow multiple hop times

-------------------------------------------------------------------
Thu Jul 11 00:00:32 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190710:
  * Fix a crash in hcs200, due to parameter type mix-up in a call to data_make (#1102)

-------------------------------------------------------------------
Wed Jul 10 00:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190709:
  * Minor remove unused var
  * Add sensor similar to GT-WT-02 (#1080)
  * Change bitrow_to_str to bitrow_printf
  * Clean up pulse demod
  * Enhance manchester demod (#983)

-------------------------------------------------------------------
Tue Jul 09 00:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190708:
  * Minor code style cleanup

-------------------------------------------------------------------
Mon Jul 08 00:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190707:
  * Update README and example config
  * Disabe Elro DB286A Doorbell by default, should be a flex config instead
  * Rubicson 48659 Cooking Thermometer
  * Improve time arg parsing

-------------------------------------------------------------------
Sat Jul 06 19:04:03 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190706:
  * Rename template to new_template to avoid reserved keyword (#1092)
  * Add TFA Dostmann 30.3196 decoder (#983)
  * Minor style cleanups
  * Add support for HCS200 KeeLoq encoder (#1081)
  * Minor style cleanups
  * Add channel output to lacrosse_TX141TH_Bv2 (#1097)
  * IKEA Sparsnäs decoder.
  * Change DirecTV to use standard id key (#1094)
  * Fix MQTT topic expansion (#1093)
  * Add support for Eurochron weather station sensor (#1090)

-------------------------------------------------------------------
Sat May 25 00:00:37 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190525:
  * Address PR discussion concerns
  * Update companion_wtr001.c
  * Update companion_wtr001.c
  * Correct Data Bit Layout
  * Correct formula
  * Add Companion WTR001 decoder

-------------------------------------------------------------------
Sat May 18 00:00:46 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190517:
  * Thermopro TP12 also supports TP20

-------------------------------------------------------------------
Tue May 07 00:01:16 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190506:
  * Convert some device IDs and other fields to new model (#1034)
  * Fix Fine Offset clock overflow on invalid data
  * Update Acurite code style, change stdout printf

-------------------------------------------------------------------
Sat May 04 00:00:46 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190503:
  * CMake: Switch back to _GNU_SOURCE (#1054)

-------------------------------------------------------------------
Tue Apr 30 00:00:50 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190429:
  * Add example for MQTT format option (#1052)

-------------------------------------------------------------------
Sat Apr 27 00:00:40 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190426:
  * Added configuration for PIR-EF4 sensor (#1049)

-------------------------------------------------------------------
Fri Apr 26 00:00:43 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190425:
  * Update README formats

-------------------------------------------------------------------
Thu Apr 25 00:00:43 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190424:
  * Change time meta option format (#1046)

-------------------------------------------------------------------
Mon Apr 22 00:00:38 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190421:
  * Change used bit count for OS v2.1
  * Simplify Oregon Scientific decoding
  * Fix doc typo

-------------------------------------------------------------------
Tue Apr 16 00:00:43 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190415:
  * Change default to ENABLE_RTLSDR=ON

-------------------------------------------------------------------
Mon Apr 15 00:00:40 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190414:
  * Update Oregon Scientific decoder code style

-------------------------------------------------------------------
Thu Apr 11 00:00:42 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190410:
  * Add Alecto WS-1200 v1/v2/DCF decoders to Fineoffset (#975)
  * Change Nexa/Proove ID, group cmd (#1036)
  * Add TS-FT002 decoder (#1015)

-------------------------------------------------------------------
Tue Apr 09 00:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190408:
  * Clean up Oregon Scientific SL109H
  * Default disable Honda Remote

-------------------------------------------------------------------
Mon Apr 08 00:00:41 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190407:
  * Add Fine Offset WH32B support (#1040)
  * Minor include clean up

-------------------------------------------------------------------
Sun Apr 07 00:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190406:
  * Fix WT450 temperature
  * Refactor functions to API
  * Refactor towards an API
  * Add LaCrosse-WS3600 support, change LaCrosse-WS to LaCrosse-WS2310
  * Add LaCrosse WS7000 support (#1029) (#1030)

-------------------------------------------------------------------
Sat Apr 06 00:00:40 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190405:
  * Omit humidity on Prologue if invalid
  * Add update_protocols call after setup (#1037)

-------------------------------------------------------------------
Fri Apr 05 00:00:39 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190404:
  * Clean up Kaku, Nexa, Proove

-------------------------------------------------------------------
Thu Apr 04 00:00:40 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190403:
  * Add MQTT output (#1016)
  * Minor fixes to SI conversion and new model reporting (#1031)

-------------------------------------------------------------------
Tue Apr 02 00:00:38 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190401:
  * Fix return values for nexa and proove decoder

-------------------------------------------------------------------
Mon Apr 01 00:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190331:
  * Fix option S crash (#1027)

-------------------------------------------------------------------
Sat Mar 30 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190329:
  * Change Honeywell WDB model to Honeywell-ActivLink

-------------------------------------------------------------------
Thu Mar 28 01:00:41 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190327:
  * Fix stats data list
  * Add stats reporting (#733)
  * Update data format documentation
  * Add Interface Specification for data output (#827)
  * Normalize wind/gust keys
  * Fix and extend mi/km conversion
  * Normalize keys on rain and rain_rate
  * Fix and enhance mm/in conversion
  * Fix BTHGN129 pressure reading (#1023)
  * Update oregon_scientific.c (#1025)
  * Add checksum to Ambient Weather TX-8300

-------------------------------------------------------------------
Wed Mar 27 01:00:38 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190326:
  * Add atoiv helper, print shorter json floats, check syslog length
  * Change Acurite-Lightning to Acurite-6045M

-------------------------------------------------------------------
Tue Mar 26 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190325:
  * Add Interlogix glassbreak subtype
  * Add Jansite TPMS support (#1020)
  * Tweak FSK demod to allow GFSK/MFSK

-------------------------------------------------------------------
Mon Mar 25 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190324:
  * Add Oregon Scientific RTHN129 support (#941)

-------------------------------------------------------------------
Sun Mar 24 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190323:
  * Use battery_ok instead of battery for newmodel
  * Update battery_low, temperatureN keys
  * Normalize odd general keys on devices (#1010)
  * Change new model to macro to allow more changes

-------------------------------------------------------------------
Sat Mar 23 01:00:37 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190322:
  * Fix Efergy-e2 current reading exponent
  * Fix install documentation (#1017)

-------------------------------------------------------------------
Fri Mar 22 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190321:
  * Refactor data output json print for syslog
  * Allow comma options in arg_param

-------------------------------------------------------------------
Thu Mar 21 01:00:38 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190320:
  * Clean up FS20 decoder
  * Add FS20 remote decoder (#999)
  * Minor cleanup
  * Fix Travis deepdiff version
  * Allow // in device and output host params

-------------------------------------------------------------------
Wed Mar 20 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190319:
  * Add bridge/relay example scripts

-------------------------------------------------------------------
Mon Mar 18 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190317:
  * Add official repo and binaries note
  * Update README
  * Add SoapySDR general keyword settings option
  * Add option to select antenna on SoapySDR devices (#968)
  * Fix scale computation from filename parameters (#1009)

-------------------------------------------------------------------
Sat Mar 16 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190315:
  * Fix some output field lists

-------------------------------------------------------------------
Fri Mar 15 01:00:38 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190314:
  * Fix CF32 loader; add CS8, CF32 dumper

-------------------------------------------------------------------
Thu Mar 14 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190313:
  * Fix some int overflows
  * Add ASAN to Debug builds

-------------------------------------------------------------------
Tue Mar 12 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190311:
  * Fix Acurite 606TX remove sync detection (#1005)

-------------------------------------------------------------------
Mon Mar 11 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190310:
  * Clean up Acurite and fix 3n1 temperature (#1004)

-------------------------------------------------------------------
Sun Mar 10 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190309:
  * tfa_twin_plus_30.3049: Add mic to output
  * Add more new model keys
  * Add some new model keys
  * Add new model keys option
  * Enhance Kedsum, S3318, Esperanza with MIC (#985)

-------------------------------------------------------------------
Wed Mar 06 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190305:
  * Add CMake option to choose driver support (#1001)
  * Fix git log in CMake for older Git

-------------------------------------------------------------------
Sun Mar 03 01:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190302:
  * Add bintray config
  * Update gitignore for build, underscore dirs, and rtl_433_tests
  * Add support for XT300/XH300 soil moisture sensor (#946)

-------------------------------------------------------------------
Sat Mar 02 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190301:
  * Fix minor compiler warning
  * Change min/max macro to MIN/MAX
  * Change error message, update example conf

-------------------------------------------------------------------
Fri Mar 01 01:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190228:
  * Add clang format config
  * Update Git version time format

-------------------------------------------------------------------
Thu Feb 28 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190227:
  * Change Schrader unit from bar to kPa

-------------------------------------------------------------------
Tue Feb 26 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190225:
  * Update code style for AlectoV1

-------------------------------------------------------------------
Mon Feb 25 01:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190224:
  * Update Prologue comments

-------------------------------------------------------------------
Sun Feb 24 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190223:
  * Improve help output and list all help in README
  * Fix another clang warning (#988)

-------------------------------------------------------------------
Fri Feb 22 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190221:
  * Add report model description option (#987)

-------------------------------------------------------------------
Thu Feb 21 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190220:
  * Update Fineoffset WH1080, Prologue var names
  * Update Acurite code style

-------------------------------------------------------------------
Tue Feb 19 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190218:
  * Refactor modulation_types to r_device.h
  * Update new_template docs
  * Update various docs and style
  * Update Fine Offset docs and style
  * Add native scale for SDRplay
  * Add Chungear BCF-0019x2 example conf

-------------------------------------------------------------------
Mon Feb 18 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190217:
  * Refactor rtl_433_devices.h to r_device.h

-------------------------------------------------------------------
Sat Feb 16 12:08:19 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190216:
  * Refactor macro scope for version_string
  * Clean up typedefs

-------------------------------------------------------------------
Sat Feb 16 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190215:
  * Fix mixed tabs/spaces style errors
  * Add basic style checks
  * Update WT450 code style
  * Fix remove trailing spaces
  * Fix stray tabs to spaces
  * Update Digitech XC-0324 indent style
  * Update Digitech XC-0324 header comments for Doxygen
  * Fix Digitech XC-0324 CRLF
  * Fix help test bin path

-------------------------------------------------------------------
Thu Feb 14 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190213:
  * Change modulation type defines to enum
  * Harmonize Doxygen comments; enable Autobrief
  * Add Conrad KW9010 note to TFA Twin Plus (#981)

-------------------------------------------------------------------
Sat Feb 09 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190208:
  * Change Nexus to check humidity directly (#980)

-------------------------------------------------------------------
Fri Feb 08 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190207:
  * Change device open default to abort if RTL-SDR is not compiled in

-------------------------------------------------------------------
Thu Feb 07 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190206:
  * Change GT-WT-02 to support newer timings; changed model name
  * Enhance PPM demod to recognize open packet ends
  * Add sample rate to pulse data; output OOK text with proper scale
  * Clean up Fine Offset WH1050 code style
  * Clean up Fine Offset WH1080/3080 code style

-------------------------------------------------------------------
Tue Feb 05 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190204:
  * Add pulse data text file support (#967)

-------------------------------------------------------------------
Mon Feb 04 01:00:50 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190203:
  * Add Digitech XC0346 support to Fine Offset WH1050 (#922)

-------------------------------------------------------------------
Sun Feb 03 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190202:
  * Add XDG_CONFIG_HOME compatability  (#954)

-------------------------------------------------------------------
Tue Jan 29 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190128:
  * Fix -G option

-------------------------------------------------------------------
Mon Jan 28 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190127:
  * Fix -inf value in noise dB calc
  * Add bitbuffer NRZI(NRZS/NRZM) decodes
  * Normalize bitbuffer indent style
  * Remove debug print from sample grabber

-------------------------------------------------------------------
Sun Jan 27 01:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190126:
  * Add Rosenborg/WH5 quirk to Fineoffset
  * Add parametric decoder setup

-------------------------------------------------------------------
Thu Jan 24 01:00:36 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190123:
  * Fix printf %zu on MinGW

-------------------------------------------------------------------
Wed Jan 23 01:00:34 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190122:
  * Fix argument type in rtl_tcp recv call

-------------------------------------------------------------------
Sun Jan 20 01:00:40 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190119:
  * Add rtl_tcp dongle info header parsing

-------------------------------------------------------------------
Fri Jan 18 01:00:45 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190111:
  * Change Travis-CI to matrix

-------------------------------------------------------------------
Sat Jan 12 01:00:35 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190111:
  * Add compiled inputs to version info
  * Document Silverline doorbell example
  * Cleanup Digitech XC-0324 comments, following completion of tutorial (#953)

-------------------------------------------------------------------
Sun Jan 06 01:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20190105:
  * Add support for Silverline doorbells (#942)
  * Add flex getter compact mask
  * Remove mandatory gap_limit from flex PWM
  * Add openSUSE nightly to BUILDING

-------------------------------------------------------------------
Tue Jan 01 01:00:33 UTC 2019 - mardnh@gmx.de

- Update to version 18.12+git.20181231:
  * Update build notes

-------------------------------------------------------------------
Sun Dec 30 23:52:48 UTC 2018 - mardnh@gmx.de

- Update to version 18.12+git.20181230:
  * Fix truncated double warnings
  * Improve MSVC builds
  * Use CTest for testing
  * Add FindLibUSB
  * Fix Shlobj.h case, _WIN32 gmtime_s
  * Update code style in term_ctl
  * Print to terminal with colour-codes inlined (#936)
  * Fix GetConsoleScreenBufferInfo for Popen
  * Fix assume WIN32 always has localtime_s
  * Disable KV beep by default
  * Refactor util into r_util
  * Use thread-safe localtime
  * Fix UTC in README
  * Clean up Springfield
  * Fix gain help
  * Print to terminal with colour-codes inlined (1)
  * Fix loop var scope
  * Fix a clang warning (#933)
  * Change TPMS Toyota to match shorter preamble
  * Change TPMS Citroen data readings
  * Change TPMS Renault data readings
  * Clean up run mode cases in main
  * Add list_push_all convenience
  * Simplify determine_csv_fields to list_t
  * Refactor init and free of cfg
  * Clean up list_t free semantic
  * Fix missing include
  * Refactor csv_init to output_start
  * Update README and make files
  * Update XC-0324 decoder style
  * Add Digitech XC-0324 temperature sensor decoder (#849)
  * Add generic list type (#929)
  * Fix CS16 reading
  * Squelch a warning (#926)
  * Account for redirection of WinCon (#925)
  * Make an exception for TERM_COLOR_BLACK (#924)
  * Rewrite term_ctl with ctx
  * Fix rtl_433.h declarations
  * Support for Windows console colours (#923)
  * Fix declaration void param
  * Refactor includes
  * Update README
  * Fix compilation with MS VC (#920)
  * Add sample rate switching
  * Update screenshot
  * Change global cfg scope
  * Change sdr_callback to cfg
  * Add cfg param to functions
  * Add typedef r_cfg_t
  * Change homedir conf load path
  * Always prefer source headers to installed ones
  * Silence Mongoose compile warnings on gcc
  * Refactor abuf string builder
  * Add Mongoose
  * Add data output poll callback
  * Move app_cfg definition
  * Make data_output_t public
  * Fix header guards
  * Add Changelog
  * Change MSC to __restrict
  * Enable Bresser 5in1, remove raw data
  * Update README examples
  * Move channel next to id in Mebus, Nexus
  * Add screenshot png
  * Update installed files
  * Update compat functions
  * Update build files
  * Fix hi-res timestamps and default search paths on Win using platform files (#910)
  * Always print version, register decoder ranges, quiet default add -v (#918)
  * Change KV printer to prettier console output (#912)
  * Fix Bresser 5in1 timings
  * Add Gust to Hideki, report proper mph (#891)
  * Change raincounter_raw field to rain_inch for acurite (#893)
  * Silence integer promotion warnings
  * Change quiet and verbose to verbosity
  * Plug a mem-leak in sdr_close() (#913)
  * Fix Bresser 5in1 parity check
  * Update README
  * Retire EC3k, Valeo, Steffen
  * Convert ELV-EM1000, ELV-WS2000 to data_make
  * Convert X10-RF to data_make
  * Convert Lightwave-RF to data_make
  * Prettify example confs
  * Allow whitespace in flex spec
  * Clean up OSv1
  * Fix time reporting at end of read-file
  * Add more byte operation util functions
  * Fix bt_rain
  * Rename proper CRC16
  * Clean up CRC LSB/MSB
  * Modularize pulse_detect
  * Fix Ambient Weather TX8300 debug print
  * Add debug bits output option
  * Clean up const in baseband, remove dumpfile
  * Change debug_output to cfg.verbose
  * Add confs ported from old devices
  * Update example conf
  * Add protocol number meta data option
  * Add precision time and time report options (#905)
  * fineoffset wh3080: support new version Watts/m value calculation
  * Update Bresser 5-in-1 code style
  * Fix Makefile for Bresser 5n1
  * Add support for Bresser Weather Center 5-in-1
  * Change indent, some style and line breaks on pulse_demod
  * Update code style
  * Remove magic timings from pulse_demod_osv1
  * Clean up ESA-x000
  * Update README
  * Fix ESA-x000 somewhat
  * Add duration and single-event option on file read also.
  * Add missing bt_rain.c file
  * Add the Biltema rain gauge protocol decoder, disabled by default
  * Add ESA 1000/2000 protocol decoder
  * Change pulse_demod to device.verbose
  * proove: add group bit to output
  * Fineoffset: add mic to output
  * Update README
  * Add report meta help and fix
  * Fix for Windows regarding closing sockets, removed unreferenced variables (#901)
  * Removing stray tabs from some device outputs
  * tfa_pool_thermometer: Fix output formatting
  * tfa_twin_plus_30.3049: Fix output formatting
  * Fix Pulse Analyzer without grabber
  * Silence CSA issue
  * Silence CSA issue
  * Silence CSA issue
  * Silence CSA issue, 2 reports
  * Silence CSA issue
  * Silence CSA issue, Division by zero
  * Silence warning.
  * Fix autotools build
  * blyss: increase buffer to silence warning
  * Fix indentation
  * prologue: add Alecto checksum check to get rid of collisions
  * Honeywell: add cvs fields
  * Added support for Honeywell Wireless Doorbell
  * Fix tcp shutdown on win32
  * Fix sdr includes
  * Deprecate option t and I for new S none|all|unknown|known
  * Use pulse detect to track and grab frames
  * Add rtl_tcp input (#894)
  * inFactory: enable it by default with added checks
  * Make meta data option known
  * Sort build files
  * thermopro_tp12: add bits per row check
  * Add Maverick et73
  * Fix missing free() in soapysdr_read_loop
  * Refactor arg parse helpers
  * Fix Efergy fprintf
  * Code style efergy_optical
  * Clean up samp_grab push
  * Clean up samp_grab writing
  * Clean am_analyzer pulse_data handling
  * Fix am_analyze sample_pos
  * Fix am_analyzer debug prints
  * Refactor sample grabber
  * Add reflect byte to flex
  * Add CRC to Hideki
  * Mark Brennenstuhl as likely x1527
  * Change short/long _limits to _width (#888)
  * Mark some x1527 decoders for reference
  * Fix file perms
  * Remove PPM_RAW in favour of precise PPM
  * Update last decoders to precise PPM
  * Update more decoders to precise PPM
  * Update some decoders to precise PPM
  * Convert Cardin to proper PWM
  * Convert Alecto to precise PPM
  * Add precise PPM to deprecated PPM_RAW
  * Add bitrow debugging output helper
  * Add output_ctx to output_fn
  * Cleanup extern in decoders
  * Convert flex slots to r_device user_data
  * Change flex to use keys for all values (#885)
  * Rename json_callback to decode_fn
  * Fix compiler warnings
  * Refactor extern sample_file_pos from local_time_str()
  * Move time_str output to data_acquired
  * Replace debug_output with verbose in decoders
  * Change data_acquired_handler to decoder_output_data
  * Add decoder arg to decoder utils
  * Add context struct to decoders
  * Add high-level utility functions for decoders (#883)
  * Prepare r_device for modularization
  * Fix print_bitbuffer binary by Geoff99
  * Document gNNN_FFFM_RRRk.cu8 file name (#884)
  * Remove deprecated PRECISE name
  * Rename PWM_PRECISE
  * Remove PWM_RAW
  * Rename FSK_PULSE_PWM
  * Change FSK PWM to PRECISE
  * Update Hondaremote code style
  * Update FineOffset WH1080/1050 to PWM_PRECISE
  * Update Brennenstuhl RCS 2044 to PWM_PRECISE
  * Fix determine_csv_fields by Mikael Kuisma
  * Update WG-PB12V1 to PWM_PRECISE
  * Update GS558 to PWM_PRECISE
  * Update LaCrosse WS to PWM_PRECISE
  * Update ELV WS2000 to PWM_PRECISE
  * Update Elro-DB286A to PWM_PRECISE
  * Update Blyss to PWM_PRECISE
  * Update HT680 to PWM_PRECISE
  * Update generic_motion to PWM_PRECISE
  * Fix flex name alloc
  * Update generic remote code style
  * Change floating tristate on generic
  * Unify protocol state with r_device
  * Change indent
  * Rename converted limits
  * Optimization use ints for limits in demod
  * Remove start_bit logic (superseded by sync) and demod_arg
  * Clarify and clean HT680 decoder
  * Clarify and clean Waveman decoder
  * Remove demod_arg from decoders where unused
  * Clarify librtlsdr defaults
  * Remove empty CMake link
  * Add Ambient Weather WH31E (#882)
  * Allow multiple input files, positional args are input files
  * Add option for output tagging
  * Refactor digest into util
  * Update Ambient Weather F007TH digest
  * Change Maverick ET-73x keys
  * Simplify Maverick ET-73x
  * Update README, style fix
  * Fix automake build. (#881)
  * Fix crash by keeping the conf in mem for now
  * Fix for latest additions on VS2015 (/17) (#879)
  * Add conf examples for generic SCV2260 and PT2260
  * Fix getopt optopt again
  * Add a conf file parser (#790)
  * Update pulse analyzer flex suggestions
  * Silence a few debug messages
  * Fix csv field registering
  * Add missing Acurite CSV output fields
  * Add some missing csv field declarations
  * Fix csv output by initializing the fields after protocol options
  * Fix compiler warning on signedness
  * Fix optopt (#873)
  * Split out option processing
  * Fix protocol option change from 4f6f6f2
  * Fix indentation for acurite (compiler warning) (#872)
  * Use negative protocol numbers to disable a device
  * Pass num_devices to usage()
  * Refactor local main vars to cfg
  * Change Ambient Weather TX-8300 model to AmbientWeather-TX8300
  * Add data_retain reference counting
  * Fix flex help text (#870)
  * Fix missing brackets (#868)
  * Print CSV header to selected output (#867)
  * Use bitrow_print in various decoders
  * Add bitbuffer_debug, bitrow_print, bitrow_debug
  * Rename TFA 30.3211.02 to Ambient Weather TX-8300 (see #846)
  * Update TFA 30.3211.02
  * Add support for TFA 30.3211.02 (#831)
  * Fix for add Emos TTX201
  * Add Emos TTX201 (#782)
  * am_analyze.c: Fix compilation under MS VS 2015/2017 (#866)
  * Update code style
  * Update code style
  * Reduce decoder includes
  * Simplify decoder includes
  * Update code style
  * Add Freq/RSSI/SNR output to data_acquired_handler (#865)
  * Fix file ext in signal grabber
  * Lift out AM analyzer
  * Modularize pwm_analyze
  * Refactor PWM analyzer, allow to run with decoders
  * Fix usage in sigrok-open.sh (#862)
  * Fix and clean Brennenstuhl RCS 2044
  * Fix data release prototype return types
  * Tune the magnitude estimator somewhat
  * Fix memset to size_t for x86
  * support for hideki/cresta temperature sensor (#858)
  * Add flex suggestion to analyzer output, switch to unit of us
  * Refactor output_handler into app_cfg
  * Refactor to app_cfg struct
  * kerui: cleanup (#816)
  * Tidy up unneeded symbol visibility
  * 2 minor fixes (#852)
  * Fix flex abort if getter name missing
  * Add help on gain option
  * Update README
  * Add Fine Offset WH65B support (#845)
  * Add null output option (suppress default KV)
  * Improved checking of Simplisafe data and default enable decoder (#798)
  * Added option to skip the tests to be built. (#832)
  * Removed all (20-30) unreferenced local variables (#850)
  * Update Readme
  * Add SoapySDR support (#842)
  * Hide template decoder from output and register_all
  * Mask off bottom bits in bitbuffer_extract_bytes()
  * Change Philips Outdoor to util CRC-4
  * Add CRC-4 util function
  * Fix output cu8 conversion
  * Add CU8/CS16 output conversion
  * Clean up LaCrosse TX35
  * Fix possible reading/printing of uninitialized memory (#840)
  * Add mic=CRC
  * Allow DOS filename drive letters in fileformat (#828)
  * Remove unused variables
  * Fix DOS-drive letter problem in fileformat
  * Fix fileformat.c for VS2015 (#828)
  * Simplify payload check
  * Add CRC check
  * Use built in crc8 function
  * Replace CRC implementation
  * Fix maintainer glob sorting
  * Remove macros to clear up name/model
  * Suppress bogus "WARNING: Failed to set frequency correction" (#830)
  * silence warning, indentation generate warnings? Who knew.
  * silence warning, mixed tabs and spaces generate warnings? Who knew.
  * silence warning
  * Clean up Ambient Weather F007TH digest
  * Add sample rate info for sigrok converter
  * Add AcuRite 3-n-1 (#720)
  * Add PMV-107J TPMS (#825)
  * Refactor out rtlsdr calls (#824)
  * Fix Ambient Weather F007TH preamble
  * Replace intmax_t with int64_t
  * Clean up stray tabs and spaces
  * Update Readme and vs15 build files
  * Add terse help on options (#820)
  * Modularize dumpers, allow multiple dumpers
  * Move out_file to dump_info
  * Remove rtlsdr sync mode
  *  Add file info detection #815
  * Fix top bits masking in flex
  * Typo fixes by Joanne Dow
  * Add VCD and SR output (#800)
  * Add flex getter (#786)
  * Fix 'Unknown protocol' with FSK
  * Fix label (#812)
  * Fix Fineoffset WH25 temp/batt
  * Reorder struct to silence minor warning
  * Fix OpenWrt by not forcing inline (#811)
  * Clean up XC0400 duplicate
  * Add Fine Offset WH65b support
  * Add version (-V) and help (-h) option (#810)
  * Add false positive checks to Interlogix
  * Fix Silvercrest remote
  * Add Fine Offset WH24 (#809)
  * Add maintainer update script (#806)
  * Refresh README, sort build files
  * Add WT0124 to VS2015 project (#805)
  * Fix MC demod typo
  * Increase MAX_PROTOCOLS for WT0124
  * add support for TP08 remote thermometer (#750)
  * Enhance currentcost device with OptiSmart (Counter) support (#751)
  * Fixes and example project to compile using MS Visual Studio 2015 (#789)
  * Clean up MINGW fixes
  * Fix MinGW build (#793)
  * Add MinGW build description for Windows, merge all build instructions in BUILDING file (#788)
  * Add Fineoffset WH2A support (#625) (#804)
  * Clean up Fineoffset WH0530
  * Clean up Hideki
  * Clean up Acurite 986
  * Change MC demod to reject syncs if tolerance is set
  * Add description, fix reset limit, add checksum check, fix channel
  * Verify the bitstream
  * Add mic
  * Add WT0124 Pool Thermometer
  * Fix includes
  * Add data_add() function (#787)
  * Fix last commit
  *  Adding default case to suppress maybe-uninitialized Warning from GCC (#784)
  * This change was forgotten in commit eb02ef4 ("Add CS16 input and output (#773)") (#796)
  * Update README
  * Clarified and expanded description of device (#791)

-------------------------------------------------------------------
Sat Aug 18 19:15:50 UTC 2018 - mardnh@gmx.de

- Update to version 18.05+git.20180806:
  * Clean up copyright notes
  * Change flex to more robust opt arg parse
  * Fix bitbuffer_parse to be sane about empty row specs
  * Tweak timings for Kerui
  * Fill id string for Bresser device.
  * Add battery event for Kerui
  * Update style for chuango
  * Update style for akhan
  * Update style and add cmds to Kerui
  * Update code style for wssensor
  * Add Hyundai WS SENZOR (#779)
  * Add fix for TEK377E, issue #776
  * Fix Makefile devices to match CMakeLists
  * Add CS16 input and output (#773)
  *  Add device: M-Bus (EN 13757-4) - Data Link layer (#768)
  * Fix for Autotools
  * Rewrite debug_mode to load_mode and dump_mode
  * Fix typo
  * Fix indents
  * Clean up baseband, optimize FM, add baseband-test (#770)
  * Rewrite ambient_weather for robustness and style
  * Remove some unwanted BITBUF_COLS uses
  * Change radiohead to unify the applications
  * Fix Sensible Living merge
  * Sensible Living protocol added. (#742)
  * Fix SOCKET(_TYPE) for syslog
  * Win32 syslog client patches (#762)
  * Make printout aligned (#761)
  * Make the frequency setting clearer. (#760)
  * Add real protocol number to startup output (#744)
  * Convert intertechno to data_make (#726)
  * see #755
  * FineOffset WH0530: Add battery low detection, correct rain factor (#765)
  * Add prototype for 'nice_freq()' (#759)
  * Add a "pretty-printer" of a frequency (#758)
  * No "Variable Length Arrays" for MSVC (#755)
  * Remove <strings.h> (#756)
  * More MSVC fixes (#754)
  * [MSVC] patch include/data.h (#753)
  * Include <stdlib.h> (#752)
  * Add support for Oregon Scientific UVR128 UV sensor (#738)
  * Update code style for RadioHead
  * DSC Sensors break out status bits
  * acurite_986: fix temperature type to enable conversion feature to work

-------------------------------------------------------------------
Fri Jun 01 20:06:21 UTC 2018 - mardnh@gmx.de

- Update to version 18.05+git.20180525:
  * New devices: Euroster 3000TX, Elro DB270 (#683)
  * Add flex spec for Byron BY doorbells (#686)
  * change array separator in csv to ";" otherwise RadioHead ASK output will break csv parsers (#687)
  * create flex dev adhoc and enable csv output (#688)
  * calc stop_time late; better exit messages (#689)
  * add proper reset and gap limit to Quhwa; use repeated rows; add csv output; style update (#691)
  * fix short char buffer
  * Adding interlogix devices driver (#649)
  * fix bitbuffer_extract_bytes clipping unaligned bits
  * fix Interlogix; style
  * Added decoder for Dish Network UHF Remote 6.3 (#700)
  * use actual max protocols
  * Update acurite.c (#704)
  * Acurite 06045M structured data (data_make) cleanup, decoding improvements. (#707)
  * Adjust alarm from 1 second to 3 second
  * Acurite 986 convert to JSON/data_make * Add hack from my branch to work around missing bit
  * Fix typos/misspellings
  * Add conversion hPA/inHG, kPa/PSI (#711)
  * Fix acurite raw_str termination
  * Touch up waveman code style, add missing time field
  * Add PiWM decoding (#724)
  * SimpliSafe Sensor (#721)
  * SimpliSafe style updates
  * Add Pacific PMV-C210 TMPS support (#717)
  * Add preamble option to flex decoder
  * Make intertechno decoder work with ITT-1500 (#694)
  * Convert DSC to structured data (#725)
  * Regularize and extend Acurite 6045M comments (#728)
  * DSC data_make additions. (#730)
  * Indents
  * Acurite TXR/6045 fixes
  * Acurite cosmetics fixes

-------------------------------------------------------------------
Mon Feb 26 21:15:42 UTC 2018 - mardnh@gmx.de

- Create subpackge for header files

-------------------------------------------------------------------
Thu Feb 15 19:25:35 UTC 2018 - mardnh@gmx.de

- Update to version 0.0.1+git.20180213:
  * fix flex options, add gap_limit for PWM
  * README.md: Add another Debian dependency (#680)
  * README.md: Fix typo (#679)
  * README.md: Add build tools to Debian command (#678)
  * revert localtime_r to localtime for win32
  * disable syslog output on win32
  * remove left over xc0348 device
  * Fix on_connect signature and topic subscriptions in MQTT examples. (#674)
  * refactor hostport_param
  * refactor abuf
  * allow ipv6 for syslog
  * add flex device to Makefile
  * refactor print_array_value
  * use prettier C99 bool macro
  * shuffle functions
  * change aux pattern to composition
  * remove output_hander_t, printer_ctx indirection
  * change indent; consistent style
  * adds a remote syslog output
  * update readme usage info
  * default enable x10_sec, timing doc, style
  * Adds x10_sec device for decoding X10 Security RF signals (#671)
  * Spelling fix: gague -> gauge (#672)
  * fix new_template
  * use localtime_r instead of localtime
  * reduce false positves with Bresser on LaCrosse TX141TH
  * add MIC to bresser
  * freshen up template with more examples
  * add a flexible general purpose decoder (#647)
  * remove PWM_TERNARY, use PWM_PRECISE for sync bits
  * change pulse_detect to use pwm_precise for sync bits
  * rename CLOCK_BITS to DMC
  * change fordremore to proper DMC, the output is vastly different
  * change DMC (clock_bits) demod to add rows on symbol errors
  * convert Acurite 592TXR from TERNARY to PRECISE
  * reduce false positives in Thermopro TP12
  * code style for LaCrosse TX141
  * convert LaCrosse TX141 from TERNARY to PRECISE
  * convert Bresser 3CH from RAW to PRECISE
  * convert LaCrosse TX from RAW to PRECISE
  * convert Philips Sensor from TERNARY to PRECISE
  * convert Calibeur from TERNARY to PRECISE
  * convert Acurite 00275rm from TERNARY to PRECISE
  * enhance pwm_precise to cover raw and ternary cases
  * add sync pulse count to bitbuffer
  * fix Lacrosse TX141TH sync rows
  * Added device LaCrosse TX141 support to lacrosse_TX141TH_Bv2.c (#670)
  * add back C99 with ADD_DEFINITIONS
  * C99 compatibility (#667)
  * add git version info to usage output if available
  * let cmake set C99; CMP0025
  * additional build deps (#668)
  * wh1080: Fix warning about uninitialized use (#666)
  * adding asepc, getkwargs helper
  * fold PWM_precise_parameters into r_device
  * output pulse_demod_pwm_precise at end of pulses as well
  * adapt precise param sync width to us
  * use _XOPEN_SOURCE on string.h for strdup
  * fix -R 0 fault
  * use bitbuffer_clear for bitbuffer_parse
  * refactor bitbuffer_parse
  * minor
  * Doxygen EXTRACT_ALL to show all docs, there isn't any notable exported API yet
  * update 1.7 Doxyfile to 1.8
  * add Doxygen building to CMake
  * cleanup
  * parse number suffixes on e.g. frequency, samplerate, duration, hoptime
  * relax false positive logic prologue/alecto to allow a single leading pulse
  * Fix unit conversions for Acurite 5n1 (#651)
  * fix `-d n` parsing
  * Add missing brand to OSv1 (#650)
  * adding FindGperftools cmake module
  * add Profile build type using GPerfTools
  * use CMake defaults for optimizations (-O3)
  * RTGN129 author name (#646)
  * change grab file name to gNNN_FFFM_RRRk.cu8 (#642)
  * replace -i <serial> with -d :<serial> (#648)
  * Clean up WIN32 include/ifdef (#643)
  * fix read-mode buffer size and allocation, s. #641 (#644)
  * reduce Alecto/Auriol-v2 false positives in Prologue
  * enable pedantic warnings; also on Clang
  * pedantic fix: -Wextra-semi
  * pedantic fix: replace arithmetic on void* (gnu extension) with sane char* arithmetic; fix function pointer for qsort, bsearch
  * adding mic to OS SL109h
  * remove false positives with wg-pb12v1, please report samples if WH2, WH5, Telldus are missing messages
  * remove debug from wg-pb12v2; add mic to fineoffset
  * fix GE Color Effects Remote indent and MAX_PROTOCOLS
  * chmod 644 on source files
  * add model switch to WH2/WH5/Telldus in fineoffset
  * Add support for Telldus variants of fineoffset (#639)
  * merge formatting from PR #615
  * disable mebus: lacks docs, tests and has false positives
  * Esperanza, Kedsum, S3318p: relax reset timing, check sync pulses to remove dups
  * fix OOK_PULSE_CLOCK_BITS pulse_tolerance to µs
  * fix: require 24 bits data for rain gauge sensors
  * Update chuango.c
  * Stop after outputting successful event(s)
  * Added support to Oregon Scientific RTGN129
  * Add device NEXA LMST-606 magnetic sensor
  * added unit (Fahrenheit) to output of Ambient Weather Temperature Sensor
  * Update rtl_433.h
  * fixed compile time warnings (formatting related)
  * change PWM_Precise_Parameters pulse_tolerance to use us instead of samples
  * fixing schraeder data types
  * Remove unintended spurious white spaces
  * Add another schrader TPMS support (corrections)
  * Add another schrader TPMS support
  * remove spurious if-statement
  * Specify device to use via serial number
  * automatically use first available dongle
  * define _GNU_SOURCE for strdup
  * Add support for the Thermopro TP-12.  This is based heavily on the code for the Thermopro TP-11, and the modulation is compatible, but the bit layout is fairly different and there are more sensors, so I've made this a separate device.
  * Addressed code review by @zuckschwerdt
  * Device handler for GE Color Effects remote control Fixes #569

-------------------------------------------------------------------
Wed Nov 01 19:58:05 UTC 2017 - mardnh@gmx.de

- Update to version 0.0.1+git.20171101:
  * Add support for Philips outdoor temperature sensor
  * move fprintf call when timer expires
  * remove check for DEFAULT_HOP_EVENTS
  * fix edge-case where bytes_to_read is equal to length of bytes read
  * Fix output formatting
  * Added support for Ford car remote.
  * Removed unused code and variables.
  * Added a ford car remote decoder for the Fiesta and CMAX. device id is a rolling id number that seems to have approx 64 variations. The meaning of the code fields has not been determined.
  * Fixed output formatting for JSON and csv
  * Added decoding of X10 CR12A ON/OFF remote commands
  * Add support for FT-004-B
  * Make LaCrosse TX141TH sensors return temperature_C so that they are more consistent with other temperature sensors (#606)
  * Acurite Rain Gague emit structured data
  * shortend model string to Inovalley kw9015b
  * added json-support and description for TFA 30.3161 rain sensor
  * Fixed do_build.sh: forgot to do 'cd ..' before cloning rtl_433_tests.git
  * Fixed do_build.sh, .travis.yml trying to run 'make test'
  * Added tests from rtl_433_tests.git repo
  * Fixed do_build.sh: don't 'make installe'
  * Fixed .travis.yml: 'sudo: required', 'dist: trusty'
  * Fixed .travis.yml: added sudo, added apt.sources
  * Fixed permissions on do_build.sh
  * Added draft of .travis.yml, do_build.sh
  * Use default number of buffers to fix crash of two rtl_433 instances
  * don't restart the timer if we are aborting anyway; cancel timer on rtlsdr_cancel_async
  * fix unknown `uint` type; whitespace fixes
  * add merbanan changes
  * add suggested optimisation
  * suggested changes
  * remove test
  * add infactory sensor
  * bitbuffer: Handle row overflow a bit more gracefully
  * pulse_analyzer: Add detection of PWM with multiple packages
  * explaining dipswitch 2 meaning
  * message validation fix
  * shortening output
  * changes after pull request
  * Switched to new data API
  * adding Renault TPMS sensor
  * adding Ford TPMS sensor
  * Add option to verify simulated decoding of raw data
  * reduce false positives by rejecting 0x000000 / 0xffffff
  * adding Toyota TPMS sensor
  * reduce false positives, require at least 5 repeats

-------------------------------------------------------------------
Sat Jul 08 09:02:24 UTC 2017 - mardnh@gmx.de

- Update to version 0.0.1+git.20170708:
  * prevent bad messages of all 1 that falsely check ok with crc.
  * adding IBIS beacon
  * fix Company name, output flags and tire pressure/temperature
  * proper units for pressure, units for power, fix OS output fields
  * adding Oil Ultrasonic Standard protocol
  * hop interval param added (multiple frequencies)
  * updated README.md
  * typo fix
  * pipe symbol with HTML code
  * Update README.md
  * Added data struct for efergye2 (#540)
  * fix fabsf() in integer context (#551)
  * adding Citroen TPMS device
  * bugfix, bitbuffer needs to be initialized
  * adding Oil Ultrasonic STANDARD using ASK on 915MHz
  * Honda remote: fix an out of bounds array access
  * Removed use of pow() (#557)
  * Possible bugfix for issue #136
  * Update .gitignore
  * Fix hex output padding for unit ID field for lightwaverf.
  * Thermopro TP-11.
  * Move TP-11 to the end.
  * Thermopro TP-11 changes:   - exit early if not enough matching rows are found   - simplify bits_per_row check   - local_time_str happens after decoding data
  * Fix sign error.
  * Variable declarations are at the top of the function.
  * Solight TE44 wireless thermometer
  * Fix spelling in documentation
  * adding Wireless Smoke and Heat Detector GS 558
  * adding Generic off-brand wireless motion sensor and alarm system
  * remove false positives from Esperanza/Kedsum
  * replace binary literals with hex
  * fix misc typos and reduce efergy false positives
  * allow WH2 to miss the first sync bit for WH5 support
  * reject false positive and fix wrong field index and minimum bit count
  * fix compiler warnings; possible undef bug; signed/unsigned

-------------------------------------------------------------------
Mon May 15 20:26:05 UTC 2017 - mardnh@gmx.de

- Update to version 0.0.1+git.20170515:
  * Add files via upload
  * Add support for Fine Offset WH3080 weather station
  * Updated "quadrant" code for WGR968
  * Restored 'static' variables
  * Bump MAX_PROTOCOLS to 78
  * cleanup: replacing broken sprintf, removing debug code
  * fix short buffer: sprintf's output is always null-terminated
  * adding output redirection to files
  * Sensor GT-WT-02 Change REDME.md
  * fix sample_file_pos to actually count seconds, each sample is 16 bits (I+Q uint8's)
  * change data output fields to usual order
  * add missing "model" data output
  * add time to data output
  * Add support for Vaillant calorMatic 340f (VRT 340f) wireless central ceating control (868MHz)
  * adds a watchdog timer to async callback, abort if async events stop arriving
  * improving compatibility for Renkforce DM-7511
  * Vaillant_vrt340f.c: Fix indentation, only whitespace changes
  * remove synthetic fahrenheit output. use `-C customary` to convert.
  * harmonize device data output to model instead of device or make, and crc instead of checksum
  * changing "crc", "checksum" to "mic"
  * delete stray trailing whitespace
  * normalize indentation to 4 spaces or one tab, depending on prevalence in each file
  * Update rtl_433.h

-------------------------------------------------------------------
Sat Apr 15 22:31:43 UTC 2017 - mardnh@gmx.de

- Reenable parallel build

-------------------------------------------------------------------
Thu Apr 13 19:22:51 UTC 2017 - mardnh@gmx.de

- Update to version 0.0.1+git.20170409:
  * Include humidity field in CSV format for TX29DHT temperature and humidity sensor. (#486)
  * Fix parse error on ARM compiling with GCC due to lack of parens. (#490)
  * Don't convert channel 4 to 3 for the sensor Oregon THGR810 (#489)
  * Fine Offset W25 Temperature/Humidity/Pressure sensor (#492)
  * Device for cheap probes where the PCB is marked WG-PB12V1.
  * Revert "Update pulse_detect.c" (#493)
  * MQTT: Add example to README and Python test client (#495)
  * Pulse Analyzer: Add 'Include only' mode (#497)
  * Fine Offset WH0530: Add new device
  * DSC: Make less noisy
  * pulse_demod: Make pwm_precise resilient to short spurious pulses
  * Acurite 6045, correct temperature decoding * Reduce Msg Type (status bits) to 2 remaining bits. * Remove possible lightning stats/flag bits from distance * output lightning status/flag bits separately for now * Understanding of status/message type bits still a WIP.
  * Acurite 06045 add docs, refactor decode out of txr_callback
  * acurite 6045, remove unnecessary variable
  * Added code for differing impules to KWH values
  * LaCrosse TX6/7 cleanup
  * LaCrosse TX6/7 reindent with consistent 4 column spacing
  * Fix #503
  * Update util.c
  * Pull Request Changes ---
  * FineOffset_WH25: Add debug printout
  * FineOffset_WH25: Correct decoding of Temperature and ID
  * FineOffset_WH0530: Fix bug in ID decode
  * FineOffset_WH25: Additional bitsum check + minor fixes
  * ELV WS2000: Make it somewhat work...
  * Corrected conflict in MAX_PROTOCOLS.
  * erroneous entry in src/Makefile.am

-------------------------------------------------------------------
Thu Feb 02 10:42:51 UTC 2017 - mardnh@gmx.de

- Update to version 0.0.1.git1486029687.074cc2f:
  * Reverse some more stray changes
  * Ensure analyzer works with auto level as default
  * Various documentation fixes for auto level
  * Acurite 6045 lightning prelim. and 609 cleanup.
  * WH1050 weather station based on WH1080 module.
  * Honeywell/Ademco Door/Window Security Sensor driver
  * Honeywell/Ademco Door/Window Security Sensor driver
  * Honeywell/Ademco Door/Window Security Sensor driver
  * Honeywell/Ademco Door/Window Security Sensor driver
  * Honeywell/Ademco Door/Window Security Sensor driver
  * Honeywell/Ademco Door/Window Security Sensor driver
  * Honeywell/Ademco Door/Window Security Sensor driver
  * Honeywell/Ademco Door/Window Security Sensor driver
  * added json/kv capbilities to Acurite tower sensor
  * added battery status as OK or LOW
  * fixes for upstream
  * fix indent
  * Update README.md
  * Added more installation step detail and troubleshooting section.
  * Correct negative temperatures
  * Danfoss CFR: Initial decoding attempt
  * Danfoss: Output data correctly
  * Danfoss: Enable driver by default
  * Danfoss: Add proper header search and make decoding byte based
  * Danfoss: Add CRC check. Remove raw printout.
  * Danfoss: Reverse engineered unknown nibble :-)
  * Danfoss: Minor cleanup and fix debug print
  * add maverick et73x BBQ sensor
  * Add crc json tag and cvs output
  * Add crc json tag
  * Update brennstuhl_rcs_2044.c
  * Spelling correction (protcols -> protocols)
  * Improved hideki.c to detect data from the wind/temperature and the rain sensor. Changed pulse_demod_clock_bits to allow a missing short gap at the end of the message which is needed for the new sensor types.
  * Increase number of protocols to 70
  * Update pulse_detect.c
  * Update acurite.c
  * Segfault on Owl CM160
  * Added support for RF-tech 433 remote temperature sensor.
  * Add rftech.c to Makefile.am to support configure/automake.
  * Added support for LaCrosse temperature/humidity sensor TX141TH-Bv2
  * Minor cosmetic changes
  * Implemented recent changes suggested by @merbanan.
  * move to new internal data format on acurite5n1
  * remove old acurite5n1 decoder, now uses acurite_txr
  * normalize temperature key
  * acurite5n1 battery status
  * correct acurite5n1 wind speed formula
  * add raw msg debug output for acurite5n1
  * acurite5n1: fix battery status
  * Stop akhan-100F14 catching things that don't belong to it
  * Add missing return 1.
  * don't mess up device ordering
  * remove old, incorrect wind direction mapping
  * output raw rain counter values, use define for msg type
  * move all units to native customary/US
  * remove another unused function
  * Removed signal quality output
  * acurite 5n1: output message sequence number
  * Add protocol definition for oregon scientific THN129 temp only sensor. (#469)
  * Support for Acurite 00275rm and 00276rm sensors (#467)
  * Fixed bug in CM160 (#474)
  * devices: mebus: Use data API for results (#475)
  * identify F007TH with both 0000000000010100 and 1111111111010100 (#481)
  * Add support for BTHGN129 (#483)
  * LaCrosse TX29-IT / TX35DTH-IT weather sensor (#479)
  * fix typo error (#484)
  * WH1050 weather station - remove unused fields from csv format. (#485)

-------------------------------------------------------------------
Mon Sep 19 18:13:46 UTC 2016 - mardnh@gmx.de

- Update to version 0.0.1.git1474227546.2d7072a:
  * Adding support for the Bresser 3CH type sensor
  * Disable acurite rain gauge due to false positive with oregon scientific v1
  * add -T option to set run duration
  * Fixed generic_remote to utilized data_acquired_handler to support json output. Not perfectly indented, but works.
  * use binary mode to open file - fixes decoding on windows
  * Improved datetime/weather signal type detection.
  * Fix incorrect handling of negative temperatures in ambient_weather.c (#376)
  * missing backtick in readme.md, now in LF (#361)
  * New Springfield Temperature and Soil Moisture decoding (#378)
  * introduce functionality to decode the Oregon Scientific SL109H Remote Thermal Hygro Sensor (#368)
  * Added data output (for json/csv/etc.) (#380)
  * Acurite 606TX Sensor Support (#382)
  * Cleanup of Acurite 606TX code that should have been done before (#383)
  * add TFA pool thermometer support (#386)
  * Enabled low battery detection on FineOffset WH1080 (#387)
  * Add support for Kedsum Temperature/Humidity sensor (#389)
  * added support for blyss dc5-uk-wh (#391)
  * Add FSK_PULSE_MANCHESTER_ZEROBIT
  * Add initial Schrader TPMS decoder
  * Better Schraeder TPMS payload meaning
  * Add Schreader TPMS crc calculation
  * Add LightwaveRF initial driver (#394)
  * Added Steelmate TPMS support (#396)
  * Fix json output and minor rearrangement of code
  * Add template decoder skeleton
  * Add initial Elro DB286A support (#398)
  * Elro DB286A: Correct id_string array length (#399)
  * Updated README for new efergy_optical sensor and missing recent devices.
  * Add CRC16-CCITT function
  * Change to new output system
  * Add brand parameter to data output format
  * Add sensor WGR968 parser support
  * Add Handling of error packet format
  * Smell and Fix some bad code
  * Changed CRC calculation to use new function in util.h no longer using lib_crc
  * added file output support and changed energy to power. only output crc values when using -D argument.
  * Only output crc when using -D argument
  * I have kept the crc calculation to be the first 10 bytes. Bytes 11 and 12 are the CRC16_CCITT. The only puzzle left is why does the last byte does as it sometimes change to 80.
  * Efergy Optical device added. Multiple changes to combine several files into one commit.
  * Removing lib_crc files
  * efergy_optical with CRC checks (#400)
  * Honda Key Remote
  * formatting changes
  * Fix review errors,using Kdiff3 to compare the code
  * Fix build
  * Honda remote key fob, decodes which button has been pressed.
  * Honda Keyfob changes
  * Added Honda Remote decoder.
  * Added Honda Remote
  * Fixed to include Honda remote any my deletion of the README.md when trying to fix git conflicts.
  * Changed author name at the top of the file, removed fprintf that was not behind if debug statement. Added a validater to check that number of bits are 386.
  * Changed and fixed validation code to suit varying bits per row. Lock command has 394 bits whereas other commands only has 386 bits per row. (#405)
  * Add THN802 and PCR800a to oregonscientific.c (#410)
  * unbreak the build (#411)
  * add battery status (low or ok) to F007TH ambient weather devices (#414)
  * Add support for another Fine Offset sensor
  * Convert Acurite "TH" (609TXC) to use data_make * Existing Acurite "TH" sensor now labeled as 609TXC * Use data_make() for JSON, CSV, KV output * minor code cleanup/reorg
  * Add RadioHead ASK device
  * Add option to register all devices
  * Fix MAX_PROTOCOLS when enabling all devices
  * acurite: disable all old api devices by default
  * ambient_weather: fprintf cleanup
  * brennstuhl_rcs_2044: disable all old api devices by default
  * cardin: disable all old api devices by default
  * danfoss: disable all old api devices by default
  * dsc: disable all old api devices by default
  * ec3k: disable all old api devices by default
  * efergy_e2_classic: disable all old api devices by default
  * elv: disable all old api devices by default
  * gt_wt_02: disable all old api devices by default
  * inovalley-kw9015b: disable all old api devices by default
  * intertechno: disable all old api devices by default
  * lacrosse: fprintf cleanup
  * lacrossews: fprintf cleanup
  * lightwave_rf: disable all old api devices by default
  * mebus: disable all old api devices by default
  * new_template: fprintf cleanup
  * silvercrest: disable all old api devices by default
  * steffen: disable all old api devices by default
  * valeo: disable all old api devices by default
  * x10_rf: disable all old api devices by default
  * Use built in CRC functions
  * Fix indent (RH ASK)
  * Declare variables at the begining (RH ASK)
  * Add CRC=OK (see #416) & fix syntax error (RH ASK)
  * Fix debug output (RH ASK)
  * fprintf fixup
  * Add device debug output
  * Added support for Kerui PIR sensor
  * Fixes
  * Cleanup related to devices disabled by default.
  * new_template rework
  * Make auto level limit the default

-------------------------------------------------------------------
Sun Mar 27 19:58:00 UTC 2016 - mardnh@gmx.de

- Update to version 0.0.1.git1459106482.900fca7:
  + use uintptr_t instead of unsigned long - fixes build error on win64
  + fix: change doc comments from "samples" to "us"
  + clean up casts regarding C Integer Promotions
  + Oregon Scientific V1 Decoding
  + add -U option to print timestamps in UTC
  + Support for Proove
  + Adjust pulse_tolerance to get all sensors to work
  + Update calibeur rf104 to new data api
  + add missing usage documentation for -n parameter: number of samples to read before quitting
  + add -T option to set run duration
  + Prevent crash when no output file is given with `-S`
  + Fineoffset: Fix key/value printout
  + pulse_analyzer: Add PCM detection
  + Revert "add -T option to set run duration"
  + Calibeur: Fix key/value printout
  + pulse_demod_osv1: Only print preamble info when debugging
  + Fix https://github.com/merbanan/rtl_433/issues/347
  + use uintptr_t instead of unsigned long for the remaining devices
  + mingw32 does not have setenv
  + Remove spurious execute permission from README.md

-------------------------------------------------------------------
Fri Mar 11 11:52:30 UTC 2016 - mardnh@gmx.de

- Update to version 0.0.1.git1457694384.7ab14a4:
  + Added support for Fine Offset WH1080 weather station. Merging with Digitech XC0348 (it's a rebranded WH1080).
  + Adding support for Fine Offset WH1080.
  + Update fineoffset_wh1080.c
  + Added support for Fine Offset WH1080
  + Add remote control on chip HT680
  + Rethinking algorithm
  + fix decoders for WGR800 & THGR810 add decoder for PCR800
  + adding a bitbuffer_find_repeated_row() with examples how it simplifies device code
  + code cleanup
  + starting to migrate to data_make
  + only try the crc if the packet would match
  + adding battery indicator for Nexus
  + add labels for ambient_weather.c to match oregon_scientific.c printout
  + Update README.md
  + Added tristate coding.
  + Correction data types in bitbuffer_find_repeated_row()
  + new feature: allow multiple outputs (WIP)
  + Decode device id from current_cost, and support more devices
  + Add support for Conrad S3318P
  + s3318p: use native temperature format
  + Add support for Conrad S3318P
  + also switch the labels on output conversion
  + Spurious output for debug mode
  + Remove some compiler warnings
  + fix wind direction nibble extract for WGR800
  + Remove some compiler warnings
  + Remove some compiler warnings
  + fix off-by-one and make the null explicit
  + LaCrosse WS-2310 json output
  + Fixed WS-2310 json gust_speed to gust_speed_ms
  + Fix some memory leaks
  + TFA Twin Plus 30.3049 json support
  + Output less decimal places to get rid of bogus digits
  + Update fineoffset_wh1080.c
  + Switched to new data API
  + Update generic_temperature_sensor.c
  + KlikAanKlikUit json support
  + Added data labels for KlikAanKlikUit output
  + Added Akhan 100F14 RKE system
  + Updated akhan_100F14 message passing
  + Update CM180 Energy Sensor code - Add Checksum and new output system format
  + Many sensor required a larger pulse tolerance
  + Add Quhwa doorbell support
  + Clearer code
  + Add support for Quhwa doorbell
  + Support for Quhwa doorbell
  + data_make output for chuango
  + Update device support
  + add missing quhwa.c reference

-------------------------------------------------------------------
Thu Feb 04 11:09:38 UTC 2016 - mardnh@gmx.de

- Update to version 0.0.0.git1454367220.e7bc33d:
  + Auto level: Increase sensitivity to low signals
  + FSK: Change FM demodulation to use integer atan2()
  + Pulse_detect: Increase maximum number of pulses
  + FSK: refactor FSK into own function for sanity
  + Auto level: Make OOK level estimators a bit slower
  + add a converter for cf32 (gnuradio output format)
  + Convert Alecto to Pulse decoder
  + Convert Inovalley to Pulse decoder
  + Convert Nexus to Pulse decoder
  + Convert Generic temperature sensor to Pulse decoder
  + Convert Steffen to Pulse decoder
  + Convert Mebus to Pulse decoder
  + Convert Intertechno to Pulse Decoder
  + Convert Newkaku / KlikAanKlikUit to Pulse decoder
  + Convert Acurite to Pulse decoder
  + Convert ELV to Pulse decoder
  + Remove last sample based decoder OOK_PWM_D
  + Remove OOK_PWM_D: Clean-up header
  + Fix: Segmentation Fault in cf32 file support
  + Update Wiki with new options
  + only treat samples as cf32 when mode==3
  + minor changes to support (cross-)compilation with MinGW
  + newkaku: support APA3-1500R
  + remove superfluous prototype
  + fix loop syntax
  + ignore buffers of all zeros.
  + rewrite LaCrosse TX output to data fields
  + adding data_make for humidity
  + typo
  + fix: broken bit operation
  + Make quiet mode output at least test file name
  + FSK: Change to F1/F2 estimation instead of F1/Fdelta
  + emonTx: Add stub driver
  + FSK: Increase initial frequency threshold
  + Change pulse data from unsigned to int to avoid undefined behaviour
  + fix limits for decoder
  + [xc0348] Add CRC validation
  + [xc0348] Don't filter on device id
  + [xc0348] Fix temperature (top nibble doesn't belong)
  + Include stdio for FILE
  + [xc0348] Add json output
  + [xc0348] Add csv fields
  + FSK: Fix data is not cleared at End Of Package
  + FSK: Fix for handling pulse overflow correctly
  + new command line option `-C native|si|customary` that hooks into `data_acquired_handler` and if `si` and type is DATA_DOUBLE and key is temperature_C then celsius2fahrenheit, if `customary` and type is DATA_DOUBLE and key is temperature_F then fahrenheit2celsius. Also if there is a FORMAT the last character "C" / "F" will be switched accordingly.
  + Emontx: Correct for sample frequency of 2.5 MHz
  + FSK: Rework to make pulse polarity absolute (pulse = high frequency)
  + bitbuffer: Add function to invert bits
  + current_cost: Invert bits to compensate for absolute FSK
  + FSK: correct comment
  + FSK: Fix slow estimation at initial frequency
  + Convert decoder limits to float instead of int, to allow more precision
  + elv: Fix precision of bit limits
  + rubicson: Fix precision of bit limits
  + Switch protocol decoder limits to µs instead of "samples at 250000Hz"
  + ec3k: Fix precision of bit limits
  + valeo: Fix precision of bit limits
  + dsc: Fix precision of bit limits
  + current_cost: Fix precision of bit limits
  + Add bitbuffer_extract_bytes() function for accessing unaligned data
  + Add crc16() function
  + Finish implementing emontx driver
  + Change bit limits in r_device structure to float too
  + Pulse detect: Make low level (noise) estimator even slower
  + Pulse detect: supress spurious short gaps
  + Pulse detect: Minor renaming for consistency
  + Pulse analyzer: Print absolute timing
  + Pulse analyzer: Print FSK frequencies
  + Pulse analyzer: Print OOK carrier frequency
  + Migrate fineoffset to new data format and add support for TFA 30.3157 Temperature sensor
  + Fix building with autotools
  + Migrate nexus to new data format and add support for Technoline TX 9116 Temperature sensor
  + fineoffset: fix typo (unbreak humidity sensor)
  + fix: missing NULL terminator
  + fix: use fabsf() instead of abs()
  + emontx: Increase size of words[] array for endianness conversion
  + alecto: only accept 36 bit packets
  + rubicson: only accept 36 bit packets
  + oil_watchman: Return events count
  + emontx: Return events count
  + rubicson: switch to new data api
  + change output of -F kv to resemble the custom fprintf output of the decoders
- add patch rtl_433-disable-test.diff to disable build-time-tests for now

-------------------------------------------------------------------
Sun Jan 03 22:29:55 UTC 2016 - mardnh@gmx.de

- Update to version 0.0.0.git1450346637.879b467:
  + Add support for new demodulation
  + Add support for WT450 devices
  + Fix automake builds Update source file list and set compiler in C99 mode
  + rubicson: implement crc and other parameters
  + nexus: clean up the nexus protocol
  + WT450: Better packet detection, battery indicator
  + WT450: Add missing the supported device label in README file.
  + New Lacrosse Weather Station Decoding
  + Added Esperanza EWS
  + LaCrosse Weather Station WS-2310TWC changes
  + Updated decoding of Lacrosse Weather Station
  + DSC Security Contact added CRC-8 calc/check * Added "little-endian" CRC-8 calculation * Moved reverse8() to util.c * Quieted WT450 callback false positive messages
  + Updated crc8 to take initial CRC value as a parameter
  + Read data from stdin with '-'
  + Added quiet mode (-q) to suppress non-data related messages
  + Lacrosse Weather Station Decoding cleanup
  + Added missing wt450.c for autoconf compile
  + Minor documentation update
  + Include the last sample when saving samples between filter runs
  + Share memory between fm buffer and temporary buffer
  + Add support for Efergy e2 classic
  + Remove unused command line argument 'c' (used to be decimation level)
  + Only allocate synchronous read buffer if synchronous reads are used
  + WT450: Fix parity computation, error messages only in debug mode
  + add Inovalley kw9015b rain and temperature weather station
  + add new noname wireless wheather station
  + fix makefile.am
  + change r_device->name from ""KW9015B Transmitter" to "Inovalley kw9015b rain and Temperature weather station"
  + rename source / callback generic_temperature_sensor
  + rename r_device->name from "RF Wireless Temp Transmitter" to "Generic temperature sensor 1"
  + Acurite 592TXR Temperature/Humidity Sensor
  + Acurite 592TXR Temperature/Humidity Sensor
  + Updated README.md with new device numbers
  + Acurite 986 Refrig/Freezer Temp initial support
  + Acurite 986, add CRC check, fix negative values
  + Acurite 986 low battery detection
  + Inovalley kw9015b : fix negative temperature
  + General structural data support for generating (ie.) JSON
  + Generic temperature sensor 1 : fix negative temperature
  + Add support for RTGN318
  + Correct indentation
  + data: provide a key-value-printer
  + data: added formatting support
  + rtl_433: added JSON support
  + wt450: use JSON output instead of fprintf
  + data: introduce auxiliary data as an argument
  + data: only format key-value-format, not JSON
  + data: added CSV support
  + rtl_433: added CSV support. Requires driver support.
  + wt450: added CSV support (provide .fields)
  + waveman: added structured data support
  + Fix compilation with autotools
  + util: Make comment consistent
  + util: Fix mismatched comment
  + ambient: Migrate to using common method for output
  + Updated README.md
  + Migrate "prologue" to new output handler
  + Prevent data files from being overwritten
  + README.md documentation updates
  + README.md space to fab fix for consitency * fix table markdown typo
  + waveman: added missing comma to fix CSV output
  + data: fixed the filtering of CSV fields
  + Convert Waveman to pulse decoder
  + Changed acurite 5n1 to use pulse demodulator
  + Convert Silvercrest to use pulse demodulator
  + Remove pwm_p_decode() and OOK_PWM_P
  + Convert from GNU to C99 syntax
  + Update alecto driver to new "data" format
  + Update oregon_scientific driver to new "data"
  + Fix indentation
  + Fix missing comma
  + Add Hideki TS04 sensors
  + Support framed FSK Manchester decoding compatible with Si4320/RFM01
  + Add Watchman Sonic ultrasonic oil tank monitor
  + Add heuristic for detecting RFM01-framed FSK
  + hideki: Remove overzealous warning about invalid parity
  + Add bitbuffer_search() and bitbuffer_manchester_decode() functions
  + Convert oil_watchman to bitbuffer_search() + bitbuffer_manchester_decode()
  + Revert "Support framed FSK Manchester decoding compatible with Si4320/RFM01"
  + Add Watchman to readme
  + Add CurrentCost TX device
  + Fix indent + TODO (minor for CurrentCost sensor)
  + Fix negatif temp value for Hideki TS04
  + Use constant to define and check OS (v2) sensor_id
  + Fix channel error with some OS devices
  + Do not require first byte of Watchman packets to be 0x28
  + Update Readme.md
  + Sync usage messages and README.md
  + README improvements, added typical command line * rtl_433: better description of ppm error option
  + Added -W to overwrite files
  + Added -W to README.md
  + Auto level - initial implementation
  + Auto level - suppress spurious initial pulses
  + FSK spurious short pulse suppression
  + Auto level - print level in analyzer
  + Fix to read complete file
  + Pass 0 into local_time_str() for current time instead of using time()
  + When reading sample files, make local_time_str() show offset not time of day
  + Add temperature output in °C to Watchman decode
  + Auto level - minor fixes
  + Improve comment about level estimates
  + Fix automake build
  + Sort source file lists in CMakeLists.txt and Makefile.am

-------------------------------------------------------------------
Sun Sep 27 18:08:03 UTC 2015 - mardnh@gmx.de

- initial package

Places

File rtl_433.changes of Package rtl_433 (Revision 6518297d19dcda041fd7f9f62fe90330)

Places