File dahdi-tools.changes of Package dahdi-tools
-------------------------------------------------------------------
Mon Oct 10 19:30:47 UTC 2011 - chris@computersalat.de
- fix deps for SLE_10
* BuildReq dahdi-linux-devel
-------------------------------------------------------------------
Mon Oct 3 20:57:23 UTC 2011 - jengelh@medozas.de
- Update to new upstream release 2.5.0.1, see
http://downloads.asterisk.org/pub/telephony/dahdi-tools/ChangeLog-2.5.0.1
- Remove redundant sections; clear up BuildRequires
- Add patch to fix wrong SO name
- Give libtelezone its own devel package
-------------------------------------------------------------------
Tue Mar 8 14:41:18 UTC 2011 - chris@computersalat.de
- update to 2.4.1
* /, xpp/perl_modules/Dahdi/Chans.pm,
xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi-perl: more
left-over $span->xpd Replace the remaining $span->xpd with
xpd_of_span(). Following up on r9648. Merged revisions 9731 via
svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
* xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: fix xpp
driver in dahdi_hardware Don't require 'dahdi_hardware -v' to
show the driver for a USB device. Only works when the usbfs is
not used (when /proc/bus/usb is not mounted). Signed-off-by:
Tzafrir Cohen <tzafrir.cohen@xorcom.com> Merged revisions 9699
via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
* /, xpp/perl_modules/Dahdi/Span.pm: dahdi-perl: left-over
$span->xpd Replace one remaining $span->{XPD} with xpd_of_span().
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Merged
revisions 9648 via svnmerge from
http://svn.digium.com/svn/dahdi/tools/trunk
* /, xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi_genconf:
Don't generate configurations that use channel 16 on E1 CAS
Attempting to use channel 16 on E1 CAS is disallowed since that
channel is reserved for RBS signaling. Configurations should not
be generated that attempt to use it. Closes DAHDI-763. Patch by
dmartinez. Merged revisions 9485 via svnmerge from
http://svn.digium.com/svn/dahdi/tools/trunk
* /, xpp/xpp_fxloader: xpp_fxloader: Don't try to load FPGA
firmware twice When called from udev to load the FPGA firmware,
make sure that this is not the event generated for the first
end-point of the existing two, as we need to talk with the second
one. This is probably better done in the udev rules, but will be
slightly more complicated to apply only to the FPGA loading and
not to USB firmware loading. Merged revisions 9482 via svnmerge
from http://svn.digium.com/svn/dahdi/tools/trunk
* dahdi_scan.c, /: dahdi_scan: Show CAS framing on the framing
line. Also, always append "/CRC4" on any span where that was
specified as an option. Signed-off-by: Shaun Ruffell
<sruffell@digium.com> Acked-by: Kinsey Moore <kmoore@digium.com>
Merged revisions 9473 via svnmerge from
http://svn.digium.com/svn/dahdi/tools/trunk
* dahdi_scan.c, /: Fixed up the loss of crc4-multiframe alignment
logic Loss of crc4-multiframe alignment on an E1 link is not a
condition which brings the span down. The span will continue to
run as long as it can maintain double frame alignment. Because of
this, we cannot place the LMFA alarm in the usual spaninfo.alarms
member, due to userspace programs using this as a catch-all for a
span being up or down. We can detect the alarm by watching the
frame error counter (fecount). If it continuously increments, the
span is configured for crc4, and the span remains OK (alarms =
0), then we are in loss of crc4-multiframe state. In order to
test this alarm, you'll need to synthesize a loss of crc4
alignment on the span. You can usually do this by configuring the
local span to use crc4 and the remote end to not use crc4. I used
the Fireberd 6000 in my lab to do this. dahdi-743 & dahdi-420
Acked-by: Shaun Ruffell <sruffell@digium.com> Merged revisions
9458 via svnmerge from
http://svn.digium.com/svn/dahdi/tools/trunk
* xpp/perl_modules/Dahdi/Hardware/PCI.pm, /: Dahdi::Hardware:
Support beroNet BN4S0e PCI Express card Add extra PCI IDs to
support "beroNet BN4S0e PCI Express 4x S0 Karte". Origin:
http://bugs.debian.org/600839 Merged revisions 9452 via svnmerge
from http://svn.digium.com/svn/dahdi/tools/trunk
* autoconfig.h.in, xpp/astribank_is_starting.c, /, configure,
configure.ac: astribank_is_starting: use semop if no semtimedop
astribank_is_starting should use a timeout for the semaphore, but
if the GNU-specific semtimedop() is not available, we'll just
fall back to using semop with no time out. Not as good, but
better than nothing. (closes issue #16783) Reported by: abelbeck
Merged revisions 9426 via svnmerge from
http://svn.digium.com/svn/dahdi/tools/trunk
* /, zonedata.c: tonezone: Add Macao,China to tone zone data Adding
Macao tone zone data according to
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf (closes
issue #17744) Reported by: alfredtang Patches: zonedata.patch
uploaded by alfredtang (license 1094) Merged revisions 9313 via
svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
- remove deprecated files from pkg
o /etc/hotplug/usb/xpp_fxloader
o /etc/hotplug/usb/xpp_fxloader.usermap
- remove Author from description
-------------------------------------------------------------------
Sat Nov 6 12:26:01 UTC 2010 - chris@computersalat.de
- fix init
o fix status
-------------------------------------------------------------------
Fri Nov 5 16:09:55 UTC 2010 - toganm@opensuse.org
- spelling correction in the dahdi.init description
- add status option which shows if the modules are loaded or not
-------------------------------------------------------------------
Thu Nov 4 13:08:08 UTC 2010 - chris@computersalat.de
- update to 2.4.0
o lot of changes please see ChangeLog file
- rpmlint: shlib-fixed-dependency
o remove explicit Requires from libtonezone2_0
-------------------------------------------------------------------
Wed Apr 21 12:02:55 UTC 2010 - chris@computersalat.de
- update to 2.3.0
* dahdi-tools version 2.3.0 released.
* xpp/perl_modules/Dahdi/Hardware/USB.pm: Also detect USB devices
connected on a hub.
* xpp/perl_modules/Dahdi/Span.pm: Also detect type for Sangoma
E1/T1 cards.
* Makefile: dahdi_maint: install dahdi_maint on 'make install'
* dahdi_maint.c: Add a space between words and correct an error
message.
* xpp/perl_modules/Dahdi/Hardware/PCI.pm: wcb4xxp - add Swyx 4xS0
SX2 QuadBri PCI IDs to dahdi-perl (issue #16493) Reported by:
nic_bellamy
* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Some more wcb4xxp PCI IDs
for Junghanns cards (issue #15446) (issue #16447) Reported by:
lpistone Tested by: okrief
- add Makefile patch
o rename modprobe files
dahdi.conf > dahdi
dahdi.blacklist.conf > dahdi.blacklist
-------------------------------------------------------------------
Sat Mar 27 16:56:41 UTC 2010 - chris@computersalat.de
- update to 2.2.1.1
* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Added IDs for gen5 firmware
-------------------------------------------------------------------
Fri Jan 22 20:37:17 UTC 2010 - chris@computersalat.de
- update to 2.2.1
* /, xpp/README.Astribank: Another round of updates to
README.Astribank. zap->dahdi and others Merged revisions 7754 via
svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
* xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: only get
'serial' and 'devnum' attributes from Astribanks We can tell if a
device is an Astribank by the vendorId and productId attribute.
Get other attributed only after we give up on other devices.
(closes issue #16552) Merged revisions 7558 via svnmerge from
https://origsvn.digium.com/svn/dahdi/tools/trunk
* /, xpp/xpp_fxloader: xpp_fxloader: adapt to newer kernels This
commit prepares xpp_fxloader to get hotplug envirnment from newer
kernel versions: * DEVICE will eventually be replaced with
DEVNAME. Accept both (and look at DEVNAME first). * If we get
DEVICE, we'll probably get an invalid path based at /proc/bus/usb
. Fix it to use /dev/bus/usb . * While we're at it, allow using
PRODUCT from the envirnment instead of from the command-line.
This should allow fixing udev rules but will also work with
existing rules in DAHDI-linux from trunk (for systems where they
are valid). Merged revisions 7752 via svnmerge from
http://svn.digium.com/svn/dahdi/tools/trunk
* /, xpp/waitfor_xpds, xpp/twinstar_hook, xpp/xpp_fxloader: xpp:
Comment-only changes: copyright, keywords Merged revisions 7463
via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
* /, xpp/twinstar: Add perldoc for twinstar. This also avoids a
bogus, empty twinstar.8 man page. Merged revisions 7219,7263 via
svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
........ r7219 | tzafrir | 2009-09-27 13:49:40 +0200 (Sun, 27 Sep
2009) | 5 lines xpp: install twinstar by default; Add a man page
Add a man page to twinstar (as perl POD) and get it installed by
default. ........ r7263 | tzafrir | 2009-09-29 22:45:50 +0200
(Tue, 29 Sep 2009) | 2 lines xpp: fix a typo in documentation
........
* README, /: Fix README for asciidoc 8.5.2 Tweak title a bit to
avoid asciidoc consider it a header for a syntax block. Merged
revisions 7792 via svnmerge from
http://svn.digium.com/svn/dahdi/tools/trunk
- added ChangeLog, LICENSE*, README
-------------------------------------------------------------------
Thu Jan 14 13:12:42 UTC 2010 - chris@computersalat.de
- include actual tarball version in package version
- cleanup source
o updated tarball to its upstream version
* it is an rc release
-------------------------------------------------------------------
Sat Jan 9 20:10:49 UTC 2010 - chris@computersalat.de
- added rpmlintrc file
- fixed build-/deps
-------------------------------------------------------------------
Mon Jan 4 01:41:54 UTC 2010 - chris@computersalat.de
- cleanup spec
o added header
o sorted TAGS
o fixed deps
o removed white spaces
o lot of rpmlint stuff
o moved changelog to changes file
- cleanup source
o removed -init tarball
o added init/sysconfig as extra Source
o added .changes file
- libs to libs sub pkg
-------------------------------------------------------------------
Mon Dec 21 02:18:20 CET 2009 - vittorio@vitsoft.bz
- dahdi-tools 2.2.1
-------------------------------------------------------------------
Wed Jul 01 05:14:56 CET 2009 - vittorio@vitsoft.bz
- dahdi-tools 2.2.0
-------------------------------------------------------------------
Wed Dec 10 18:50:31 CET 2008 - vittorio@vitsoft.bz
- dahdi-tools 2.1.0
-------------------------------------------------------------------
Sat Oct 04 19:27:40 CET 2008 - vittorio@vitsoft.bz
- dahdi-tools 2.0.0
-------------------------------------------------------------------
Mon Sep 08 06:33:30 CET 2008 - vittorio@vitsoft.bz
- dahdi-tools 2.0.0 rc2
