File libresample-0.1.3-shlib-cmake.patch of Package libresample
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..84857e9
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,16 @@
+*~
+/src/config.h
+/libresample.so*
+/cmake_install.cmake
+/CMakeCache.txt
+/.sconsign.dblite
+/CMakeFiles
+/Makefile
+/CTestTestfile.cmake
+/DartTestfile.txt
+/Testing
+/libresample.pc
+/testresample
+/compareresample
+/resample-sndfile
+/docs/html
diff --git a/CMakeLists.txt b/CMakeLists.txt
new file mode 100644
index 0000000..e70429f
--- /dev/null
+++ b/CMakeLists.txt
@@ -0,0 +1,60 @@
+cmake_minimum_required(VERSION 2.6)
+project(libresample)
+enable_testing()
+
+include(CheckIncludeFiles)
+include(CheckTypeSize)
+include(FindPkgConfig)
+
+check_type_size("void *" POINTER_SIZE)
+
+if(${POINTER_SIZE} EQUAL 8)
+ set(LIBDIR lib64)
+elseif(${POINTER_SIZE} EQUAL 4)
+ set(LIBDIR lib)
+else(${POINTER_SIZE} EQUAL 8)
+ message(FATAL_ERROR "pointer size is not 4 bytes or 8 bytes")
+endif(${POINTER_SIZE} EQUAL 8)
+
+check_include_files(inttypes.h HAVE_INTTYPES_H)
+
+find_library(HAVE_LIBM m)
+
+pkg_check_modules(SNDFILE sndfile)
+pkg_check_modules(SAMPLERATE samplerate)
+
+find_program(DOXYGEN NAMES doxygen)
+
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/src/configtemplate.h ${CMAKE_CURRENT_BINARY_DIR}/src/config.h)
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/libresample.pc.in ${CMAKE_CURRENT_BINARY_DIR}/libresample.pc)
+
+add_library(resample SHARED src/filterkit.c src/resample.c src/resamplesubs.c)
+set_target_properties(resample PROPERTIES VERSION 1.0 SOVERSION 1)
+install(TARGETS resample LIBRARY DESTINATION ${LIBDIR})
+install(FILES include/libresample.h DESTINATION include)
+
+add_executable(testresample tests/testresample.c)
+target_link_libraries(testresample resample m)
+add_test(testresample testresample)
+
+if(SNDFILE_FOUND)
+ add_executable(resample-sndfile tests/resample-sndfile.c)
+ target_link_libraries(resample-sndfile resample m)
+ set_target_properties(resample-sndfile PROPERTIES COMPILE_FLAGS "${SNDFILE_CFLAGS}" LINK_FLAGS "${SNDFILE_LDFLAGS}")
+ install(TARGETS resample-sndfile RUNTIME DESTINATION bin)
+endif(SNDFILE_FOUND)
+
+if(SAMPLERATE_FOUND)
+ add_executable(compareresample tests/compareresample.c)
+ target_link_libraries(compareresample resample m)
+ set_target_properties(compareresample PROPERTIES COMPILE_FLAGS "${SAMPLERATE_CFLAGS}" LINK_FLAGS "${SAMPLERATE_LDFLAGS}")
+ add_test(compareresample compareresample)
+endif(SAMPLERATE_FOUND)
+
+install(FILES libresample.pc DESTINATION ${LIBDIR}/pkgconfig)
+
+if(DOXYGEN)
+ add_custom_command(OUTPUT docs/html/index.html COMMAND ${DOXYGEN} docs/Doxyfile DEPENDS include/libresample.h)
+ add_custom_target(docs ALL DEPENDS docs/html/index.html)
+endif(DOXYGEN)
+
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index febf70a..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,57 +0,0 @@
-# Run configure to generate Makefile from Makefile.in on
-# any system supported by GNU autoconf. For all other
-# systems, use this file as a template to create a
-# working Makefile.
-
-CC = @CC@
-CFLAGS = @CFLAGS@ -Wall
-
-LIBS = @LIBS@ -lm
-
-AR = @AR@
-RANLIB = @RANLIB@
-srcdir=@srcdir@
-
-OBJS = \
- src/resample.c.o \
- src/resamplesubs.c.o \
- src/filterkit.c.o
-
-TARGETS = @TARGETS@
-DIRS=tests
-
-all: $(TARGETS)
-
-libresample.a: $(OBJS) Makefile
- $(AR) ruv libresample.a $(OBJS)
- ranlib libresample.a
-
-tests/testresample: libresample.a $(srcdir)/tests/testresample.c $(DIRS)
- $(CC) -o tests/testresample \
- $(CFLAGS) $(srcdir)/tests/testresample.c \
- libresample.a $(LIBS)
-
-tests/compareresample: libresample.a $(srcdir)/tests/compareresample.c $(DIRS)
- $(CC) -o tests/compareresample \
- $(CFLAGS) $(srcdir)/tests/compareresample.c \
- libresample.a -lsamplerate $(LIBS)
-
-tests/resample-sndfile: libresample.a $(srcdir)/tests/resample-sndfile.c $(DIRS)
- $(CC) -o tests/resample-sndfile \
- $(CFLAGS) $(srcdir)/tests/resample-sndfile.c \
- libresample.a -lsndfile $(LIBS)
-
-$(DIRS):
- mkdir $(DIRS)
-
-clean:
- rm -f $(TARGETS) $(OBJS)
-
-dist: clean
- rm -f Makefile
- rm -f config.status config.cache config.log src/config.h
- rm -f *~ src/*~ tests/*~ include/*~
-
-$(OBJS): %.c.o: $(srcdir)/%.c Makefile $(srcdir)/include/libresample.h \
- $(srcdir)/src/resample_defs.h $(srcdir)/src/filterkit.h $(srcdir)/src/config.h
- $(CC) -c $(CFLAGS) $< -o $@
diff --git a/config.guess b/config.guess
deleted file mode 100755
index 297e5c3..0000000
--- a/config.guess
+++ /dev/null
@@ -1,1308 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-
-timestamp='2001-10-05'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <bothner@cygnus.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-
-dummy=dummy-$$
-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script.
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int dummy(){}" > $dummy.c ;
- for c in cc gcc c89 ; do
- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
- if test $? = 0 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- rm -f $dummy.c $dummy.o $dummy.rel ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- # Determine the machine/vendor (is the vendor relevant).
- case "${UNAME_MACHINE}" in
- amiga) machine=m68k-unknown ;;
- arm32) machine=arm-unknown ;;
- atari*) machine=m68k-atari ;;
- sun3*) machine=m68k-sun ;;
- mac68k) machine=m68k-apple ;;
- macppc) machine=powerpc-apple ;;
- hp3[0-9][05]) machine=m68k-hp ;;
- ibmrt|romp-ibm) machine=romp-ibm ;;
- sparc*) machine=`uname -p`-unknown ;;
- *) machine=${UNAME_MACHINE}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE}" in
- i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- cat <<EOF >$dummy.s
- .data
-\$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-
- .text
- .globl main
- .align 4
- .ent main
-main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
- .end main
-EOF
- eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- case `./$dummy` in
- 0-0)
- UNAME_MACHINE="alpha"
- ;;
- 1-0)
- UNAME_MACHINE="alphaev5"
- ;;
- 1-1)
- UNAME_MACHINE="alphaev56"
- ;;
- 1-101)
- UNAME_MACHINE="alphapca56"
- ;;
- 2-303)
- UNAME_MACHINE="alphaev6"
- ;;
- 2-307)
- UNAME_MACHINE="alphaev67"
- ;;
- 2-1307)
- UNAME_MACHINE="alphaev68"
- ;;
- esac
- fi
- rm -f $dummy.s $dummy
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit 0;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy \
- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy`
- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
- rm -f $dummy.c $dummy
- fi ;;
- esac
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*X-MP:*:*:*)
- echo xmp-cray-unicos
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3D:*:*:*)
- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY-2:*:*:*)
- echo cray2-cray-unicos
- exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i386-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
- case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in
- big) echo mips-unknown-linux-gnu && exit 0 ;;
- little) echo mipsel-unknown-linux-gnu && exit 0 ;;
- esac
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- ld_supported_targets=`cd /; ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- cat >$dummy.c <<EOF
-#include <features.h>
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __ELF__
-# ifdef __GLIBC__
-# if __GLIBC__ >= 2
- printf ("%s-pc-linux-gnu\n", argv[1]);
-# else
- printf ("%s-pc-linux-gnulibc1\n", argv[1]);
-# endif
-# else
- printf ("%s-pc-linux-gnulibc1\n", argv[1]);
-# endif
-#else
- printf ("%s-pc-linux-gnuaout\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit 0 ;;
- i*86:*:5:[78]*)
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit 0 ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit 0 ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit 0 ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit 0 ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
- echo `uname -p`-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- if test "${UNAME_MACHINE}" = "x86pc"; then
- UNAME_MACHINE=pc
- fi
- echo `uname -p`-${UNAME_MACHINE}-nto-qnx
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
- NSR-[KW]:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit 0 ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit 0 ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit 0 ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit 0 ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit 0 ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit 0 ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
-rm -f $dummy.c $dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/config.sub b/config.sub
deleted file mode 100755
index 791bcde..0000000
--- a/config.sub
+++ /dev/null
@@ -1,1413 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-
-timestamp='2001-10-05'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit 0;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
- | c4x | clipper \
- | d10v | d30v | dsp16xx \
- | fr30 \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | m32r | m68000 | m68k | m88k | mcore \
- | mips16 | mips64 | mips64el | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el | mips64vr4300 \
- | mips64vr4300el | mips64vr5000 | mips64vr5000el \
- | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
- | mipsisa32 \
- | mn10200 | mn10300 \
- | ns16k | ns32k \
- | openrisc \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | s390 | s390x \
- | sh | sh[34] | sh[34]eb | shbe | shle \
- | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
- | stormy16 | strongarm \
- | tahoe | thumb | tic80 | tron \
- | v850 \
- | we32k \
- | x86 | xscale \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alphapca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armv*-* \
- | avr-* \
- | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c54x-* \
- | clipper-* | cray2-* | cydra-* \
- | d10v-* | d30v-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | m32r-* \
- | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
- | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
- | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
- | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | s390-* | s390x-* \
- | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \
- | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
- | v850-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \
- | ymp-* \
- | z8k-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- cray2)
- basic_machine=cray2-cray
- os=-unicos
- ;;
- [cjt]90)
- basic_machine=${basic_machine}-cray
- os=-unicos
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mipsel*-linux*)
- basic_machine=mipsel-unknown
- os=-linux-gnu
- ;;
- mips*-linux*)
- basic_machine=mips-unknown
- os=-linux-gnu
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- mmix*)
- basic_machine=mmix-knuth
- os=-mmixware
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2)
- basic_machine=i686-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=t3e-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- windows32)
- basic_machine=i386-pc
- os=-windows32-msvcrt
- ;;
- xmp)
- basic_machine=xmp-cray
- os=-unicos
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- mips)
- if [ x$os = x-linux-gnu ]; then
- basic_machine=mips-unknown
- else
- basic_machine=mips-mips
- fi
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh3 | sh4 | sh3eb | sh4eb)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv9 | sparcv9b)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- c4x*)
- basic_machine=c4x-none
- os=-coff
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto*)
- os=-nto-qnx
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-ibm)
- os=-aix
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -vxsim* | -vxworks*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/configure b/configure
deleted file mode 100755
index 37fd9c1..0000000
--- a/configure
+++ /dev/null
@@ -1,2937 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by Autoconf 2.52.
-#
-# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-
-# Name of the executable.
-as_me=`echo "$0" |sed 's,.*[\\/],,'`
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-# NLS nuisances.
-$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
-$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
-$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
-$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
-$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
-$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
-$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
-$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-cross_compiling=no
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-ac_unique_file="src/resample.c"
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_prev=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: should be removed in autoconf 3.0.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2
- { (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources in $srcdir" >&2
- { (exit 1); exit 1; }; }
- fi
-fi
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<EOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-EOF
-
- cat <<EOF
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
-EOF
-
- cat <<\EOF
-EOF
-fi
-
-if test -n "$ac_init_help"; then
-
- cat <<\EOF
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-EOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
- for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
- cd $ac_subdir
- # A "../" for each directory in /$ac_subdir.
- ac_dots=`echo $ac_subdir |
- sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`
-
- case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_sub_srcdir=$srcdir ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_sub_srcdir=$srcdir/$ac_subdir ;;
- *) # Relative path.
- ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
- esac
-
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_sub_srcdir/configure.gnu; then
- echo
- $SHELL $ac_sub_srcdir/configure.gnu --help=recursive
- elif test -f $ac_sub_srcdir/configure; then
- echo
- $SHELL $ac_sub_srcdir/configure --help=recursive
- elif test -f $ac_sub_srcdir/configure.ac ||
- test -f $ac_sub_srcdir/configure.in; then
- echo
- $ac_configure --help
- else
- echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
- fi
- cd $ac_popdir
- done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
- cat <<\EOF
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-EOF
- exit 0
-fi
-exec 5>config.log
-cat >&5 <<EOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.52. Invocation command line was
-
- $ $0 $@
-
-EOF
-{
-cat <<_ASUNAME
-## ---------- ##
-## Platform. ##
-## ---------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-PATH = $PATH
-
-_ASUNAME
-} >&5
-
-cat >&5 <<EOF
-## ------------ ##
-## Core tests. ##
-## ------------ ##
-
-EOF
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell meta-characters.
-ac_configure_args=
-ac_sep=
-for ac_arg
-do
- case $ac_arg in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- ac_sep=" " ;;
- *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
- ac_sep=" " ;;
- esac
- # Get rid of the leading space.
-done
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- echo >&5
- echo "## ----------------- ##" >&5
- echo "## Cache variables. ##" >&5
- echo "## ----------------- ##" >&5
- echo >&5
- # The following way of writing the cache mishandles newlines in values,
-{
- (set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
- *)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} >&5
- sed "/^$/d" confdefs.h >conftest.log
- if test -s conftest.log; then
- echo >&5
- echo "## ------------ ##" >&5
- echo "## confdefs.h. ##" >&5
- echo "## ------------ ##" >&5
- echo >&5
- cat conftest.log >&5
- fi
- (echo; echo) >&5
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal" >&5
- echo "$as_me: exit $exit_status" >&5
- rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
- exit $exit_status
- ' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- { echo "$as_me:819: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- cat "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:830: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
- esac
- fi
-else
- { echo "$as_me:838: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:854: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:858: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:864: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:866: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:868: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status. It doesn't matter if
- # we pass some twice (in addition to the command line arguments).
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
- ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
- ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:887: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:889: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-echo "#! $SHELL" >conftest.sh
-echo "exit 0" >>conftest.sh
-chmod +x conftest.sh
-if { (echo "$as_me:909: PATH=\".;.\"; conftest.sh") >&5
- (PATH=".;."; conftest.sh) 2>&5
- ac_status=$?
- echo "$as_me:912: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- ac_path_separator=';'
-else
- ac_path_separator=:
-fi
-PATH_SEPARATOR="$ac_path_separator"
-rm -f conftest.sh
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:929: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_CC="${ac_tool_prefix}gcc"
-echo "$as_me:944: found $ac_dir/$ac_word" >&5
-break
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:952: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:955: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:964: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_ac_ct_CC="gcc"
-echo "$as_me:979: found $ac_dir/$ac_word" >&5
-break
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:987: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:990: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:1003: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_CC="${ac_tool_prefix}cc"
-echo "$as_me:1018: found $ac_dir/$ac_word" >&5
-break
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:1026: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:1029: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:1038: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_ac_ct_CC="cc"
-echo "$as_me:1053: found $ac_dir/$ac_word" >&5
-break
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:1061: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:1064: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:1077: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
-fi
-ac_cv_prog_CC="cc"
-echo "$as_me:1097: found $ac_dir/$ac_word" >&5
-break
-done
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" ${1+"$@"}
- shift
- ac_cv_prog_CC="$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:1119: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:1122: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:1133: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-echo "$as_me:1148: found $ac_dir/$ac_word" >&5
-break
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:1156: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:1159: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:1172: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_ac_ct_CC="$ac_prog"
-echo "$as_me:1187: found $ac_dir/$ac_word" >&5
-break
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:1195: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:1198: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$ac_ct_CC" && break
-done
-
- CC=$ac_ct_CC
-fi
-
-fi
-
-test -z "$CC" && { { echo "$as_me:1210: error: no acceptable cc found in \$PATH" >&5
-echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:1215:" \
- "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:1218: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:1221: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:1223: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:1226: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:1228: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:1231: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-#line 1235 "configure"
-#include "confdefs.h"
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:1251: checking for C compiler default output" >&5
-echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:1254: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
- ac_status=$?
- echo "$as_me:1257: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-for ac_file in `ls a.exe conftest.exe 2>/dev/null;
- ls a.out conftest 2>/dev/null;
- ls a.* conftest.* 2>/dev/null`; do
- case $ac_file in
- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
- a.out ) # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:1280: error: C compiler cannot create executables" >&5
-echo "$as_me: error: C compiler cannot create executables" >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:1286: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:1291: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (eval echo "$as_me:1297: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1300: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:1307: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-echo "$as_me:1315: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:1322: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:1324: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:1327: checking for executable suffix" >&5
-echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6
-if { (eval echo "$as_me:1329: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:1332: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
- case $ac_file in
- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:1348: error: cannot compute EXEEXT: cannot compile and link" >&5
-echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:1354: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:1360: checking for object suffix" >&5
-echo $ECHO_N "checking for object suffix... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-#line 1366 "configure"
-#include "confdefs.h"
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:1378: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:1381: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:1393: error: cannot compute OBJEXT: cannot compile" >&5
-echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:1400: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:1404: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-#line 1410 "configure"
-#include "confdefs.h"
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:1425: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:1428: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:1431: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1434: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_compiler_gnu=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:1446: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:1452: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-#line 1458 "configure"
-#include "confdefs.h"
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:1470: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:1473: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:1476: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1479: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:1489: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:1516: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:1519: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:1522: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1525: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- ''\
- '#include <stdlib.h>' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-#line 1537 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:1550: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:1553: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:1556: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1559: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-continue
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-#line 1569 "configure"
-#include "confdefs.h"
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:1581: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:1584: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:1587: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1590: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:1620: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-echo "$as_me:1635: found $ac_dir/$ac_word" >&5
-break
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- echo "$as_me:1643: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
- echo "$as_me:1646: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:1655: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- $as_executable_p "$ac_dir/$ac_word" || continue
-ac_cv_prog_ac_ct_RANLIB="ranlib"
-echo "$as_me:1670: found $ac_dir/$ac_word" >&5
-break
-done
-
- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- echo "$as_me:1679: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
- echo "$as_me:1682: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- RANLIB=$ac_ct_RANLIB
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-# Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-echo "$as_me:1693: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $AR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_AR="$AR" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS=$IFS; IFS=$ac_path_separator
-ac_dummy="$PATH"
-for ac_dir in $ac_dummy; do
- IFS=$ac_save_IFS
- test -z "$ac_dir" && ac_dir=.
- if $as_executable_p "$ac_dir/$ac_word"; then
- ac_cv_path_AR="$ac_dir/$ac_word"
- echo "$as_me:1710: found $ac_dir/$ac_word" >&5
- break
-fi
-done
-
- test -z "$ac_cv_path_AR" && ac_cv_path_AR="no"
- ;;
-esac
-fi
-AR=$ac_cv_path_AR
-
-if test -n "$AR"; then
- echo "$as_me:1722: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
-else
- echo "$as_me:1725: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-if [ $AR = "no" ] ; then
- { { echo "$as_me:1730: error: \"Could not find ar - needed to create a library\"" >&5
-echo "$as_me: error: \"Could not find ar - needed to create a library\"" >&2;}
- { (exit 1); exit 1; }; };
-fi
-
-TARGETS="libresample.a tests/testresample"
-
-echo "$as_me:1737: checking for sf_open in -lsndfile" >&5
-echo $ECHO_N "checking for sf_open in -lsndfile... $ECHO_C" >&6
-if test "${ac_cv_lib_sndfile_sf_open+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsndfile $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line 1745 "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char sf_open ();
-int
-main ()
-{
-sf_open ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:1764: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:1767: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:1770: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1773: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_sndfile_sf_open=yes
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_sndfile_sf_open=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:1784: result: $ac_cv_lib_sndfile_sf_open" >&5
-echo "${ECHO_T}$ac_cv_lib_sndfile_sf_open" >&6
-if test $ac_cv_lib_sndfile_sf_open = yes; then
- have_libsndfile=yes
-else
- have_libsndfile=no
-fi
-
-if [ $have_libsndfile = "yes" ] ; then
- TARGETS="$TARGETS tests/resample-sndfile"
-fi
-
-echo "$as_me:1796: checking for src_simple in -lsamplerate" >&5
-echo $ECHO_N "checking for src_simple in -lsamplerate... $ECHO_C" >&6
-if test "${ac_cv_lib_samplerate_src_simple+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsamplerate $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line 1804 "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char src_simple ();
-int
-main ()
-{
-src_simple ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:1823: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:1826: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:1829: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:1832: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_samplerate_src_simple=yes
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_samplerate_src_simple=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:1843: result: $ac_cv_lib_samplerate_src_simple" >&5
-echo "${ECHO_T}$ac_cv_lib_samplerate_src_simple" >&6
-if test $ac_cv_lib_samplerate_src_simple = yes; then
- have_libsamplerate=yes
-else
- have_libsamplerate=no
-fi
-
-if [ $have_libsamplerate = "yes" ] ; then
- TARGETS="$TARGETS tests/compareresample"
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:1860: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-#line 1881 "configure"
-#include "confdefs.h"
-#include <assert.h>
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:1886: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:1892: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-#line 1915 "configure"
-#include "confdefs.h"
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:1919: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:1925: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:1962: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-#line 1972 "configure"
-#include "confdefs.h"
-#include <assert.h>
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:1977: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:1983: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-#line 2006 "configure"
-#include "confdefs.h"
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:2010: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:2016: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:2044: error: C preprocessor \"$CPP\" fails sanity check" >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-for ac_header in inttypes.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:2058: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-#line 2064 "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:2068: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:2074: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- eval "$as_ac_Header=no"
-fi
-rm -f conftest.err conftest.$ac_ext
-fi
-echo "$as_me:2093: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<EOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-EOF
-
-fi
-done
-
-ac_config_headers="$ac_config_headers src/config.h:src/configtemplate.h"
-
-ac_config_files="$ac_config_files Makefile"
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} |
- sed '
- t clear
- : clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if cmp -s $cache_file confcache; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
- cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:2185: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-ac_cs_invocation="\$0 \$@"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-
-# Name of the executable.
-as_me=`echo "$0" |sed 's,.*[\\/],,'`
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-# NLS nuisances.
-$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
-$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
-$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
-$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
-$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
-$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
-$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
-$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
-
-exec 6>&1
-
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\EOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Report bugs to <bug-autoconf@gnu.org>."
-EOF
-
-cat >>$CONFIG_STATUS <<EOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.52,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-EOF
-
-cat >>$CONFIG_STATUS <<\EOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- shift
- set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
- shift
- ;;
- -*);;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_need_defaults=false;;
- esac
-
- case $1 in
- # Handling of the options.
-EOF
-cat >>$CONFIG_STATUS <<EOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
- exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
-EOF
-cat >>$CONFIG_STATUS <<\EOF
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:2357: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- shift
- CONFIG_FILES="$CONFIG_FILES $1"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- shift
- CONFIG_HEADERS="$CONFIG_HEADERS $1"
- ac_need_defaults=false;;
-
- # This is an error.
- -*) { { echo "$as_me:2376: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-exec 5>>config.log
-cat >&5 << _ACEOF
-
-## ----------------------- ##
-## Running config.status. ##
-## ----------------------- ##
-
-This file was extended by $as_me 2.52, executed with
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- > $ac_cs_invocation
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-
-_ACEOF
-EOF
-
-cat >>$CONFIG_STATUS <<\EOF
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "src/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/config.h:src/configtemplate.h" ;;
- *) { { echo "$as_me:2413: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-fi
-
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
- tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=$TMPDIR/cs$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in $TMPDIR" >&2
- { (exit 1); exit 1; }
-}
-
-EOF
-
-cat >>$CONFIG_STATUS <<EOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@DEFS@,$DEFS,;t t
-s,@LIBS@,$LIBS,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@AR@,$AR,;t t
-s,@TARGETS@,$TARGETS,;t t
-s,@CPP@,$CPP,;t t
-CEOF
-
-EOF
-
- cat >>$CONFIG_STATUS <<\EOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-EOF
-cat >>$CONFIG_STATUS <<\EOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- { case "$ac_dir" in
- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
- *) as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
- case $as_mkdir_dir in
- # Skip DOS drivespec
- ?:) as_incr_dir=$as_mkdir_dir ;;
- *)
- as_incr_dir=$as_incr_dir/$as_mkdir_dir
- test -d "$as_incr_dir" || mkdir "$as_incr_dir"
- ;;
- esac
-done; }
-
- ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
- else
- ac_dir_suffix= ac_dots=
- fi
-
- case $srcdir in
- .) ac_srcdir=.
- if test -z "$ac_dots"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_dots | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* )
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_dots$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_dots$srcdir ;;
- esac
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:2615: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated automatically by config.status. */
- configure_input="Generated automatically from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:2633: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo $f;;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo $f
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo $srcdir/$f
- else
- # /dev/null tree
- { { echo "$as_me:2646: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
-EOF
-cat >>$CONFIG_STATUS <<EOF
- sed "$ac_vpsub
-$extrasub
-EOF
-cat >>$CONFIG_STATUS <<\EOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-EOF
-cat >>$CONFIG_STATUS <<\EOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='[ ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- test x"$ac_file" != x- && { echo "$as_me:2706: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:2717: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo $f;;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo $f
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo $srcdir/$f
- else
- # /dev/null tree
- { { echo "$as_me:2730: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- # Remove the trailing spaces.
- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-
-EOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h. The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status. Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\EOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\(\([^ (][^ (]*\)([^)]*)\)[ ]*\(.*\)$,${ac_dA}\2${ac_dB}\1${ac_dC}\3${ac_dD},gp
-t end
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-EOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless. Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\EOF
-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-EOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo ' :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
- # Write a limited-size here document to $tmp/defines.sed.
- echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#define' lines.
- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/defines.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo ' fi # egrep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
- # Write a limited-size here document to $tmp/undefs.sed.
- echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#undef'
- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/undefs.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
- rm -f conftest.undefs
- mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\EOF
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated automatically by config.status. */
- if test x"$ac_file" = x-; then
- echo "/* Generated automatically by configure. */" >$tmp/config.h
- else
- echo "/* $ac_file. Generated automatically by configure. */" >$tmp/config.h
- fi
- cat $tmp/in >>$tmp/config.h
- rm -f $tmp/in
- if test x"$ac_file" != x-; then
- if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
- { echo "$as_me:2847: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- { case "$ac_dir" in
- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
- *) as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
- case $as_mkdir_dir in
- # Skip DOS drivespec
- ?:) as_incr_dir=$as_mkdir_dir ;;
- *)
- as_incr_dir=$as_incr_dir/$as_mkdir_dir
- test -d "$as_incr_dir" || mkdir "$as_incr_dir"
- ;;
- esac
-done; }
-
- fi
- rm -f $ac_file
- mv $tmp/config.h $ac_file
- fi
- else
- cat $tmp/config.h
- rm -f $tmp/config.h
- fi
-done
-EOF
-
-cat >>$CONFIG_STATUS <<\EOF
-
-{ (exit 0); exit 0; }
-EOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-echo ""
-
-if [ $have_libsamplerate = "yes" ] ; then
- echo "Configured to build tests/resample-sndfile using libsndfile"
- echo ""
-else
- echo "Could not find libsndfile - needed if you want to"
- echo "compile tests/resample-sndfile"
- echo ""
-fi
-
-if [ $have_libsamplerate = "yes" ] ; then
- echo "Configured to build tests/compareresample to compare against"
- echo "Erik de Castro Lopo's libsamplerate library."
- echo ""
-else
- echo "Could not find libsamplerate - only needed if you want to"
- echo "compile tests/compareresample to compare their performance."
- echo ""
-fi
-
-echo "Type 'configure --help' to see options."
-echo ""
-echo "Type 'make' to build libresample and tests."
diff --git a/configure.in b/configure.in
deleted file mode 100644
index bd537d1..0000000
--- a/configure.in
+++ /dev/null
@@ -1,66 +0,0 @@
-dnl
-dnl libresample configure.in script
-dnl
-dnl Dominic Mazzoni
-dnl
-
-dnl Require autoconf >= 2.13
-AC_PREREQ(2.13)
-
-dnl Init autoconf and make sure configure is being called
-dnl from the right directory
-AC_INIT([src/resample.c])
-
-dnl Checks for programs.
-AC_PROG_CC
-AC_PROG_RANLIB
-
-AC_PATH_PROG(AR, ar, no)
-if [[ $AR = "no" ]] ; then
- AC_MSG_ERROR("Could not find ar - needed to create a library");
-fi
-
-AC_SUBST(TARGETS)
-TARGETS="libresample.a tests/testresample"
-
-AC_CHECK_LIB(sndfile, sf_open, have_libsndfile=yes, have_libsndfile=no)
-
-if [[ $have_libsndfile = "yes" ]] ; then
- TARGETS="$TARGETS tests/resample-sndfile"
-fi
-
-AC_CHECK_LIB(samplerate, src_simple, have_libsamplerate=yes, have_libsamplerate=no)
-
-if [[ $have_libsamplerate = "yes" ]] ; then
- TARGETS="$TARGETS tests/compareresample"
-fi
-
-AC_CHECK_HEADERS(inttypes.h)
-
-AC_CONFIG_HEADER(src/config.h:src/configtemplate.h)
-AC_OUTPUT([Makefile])
-
-echo ""
-
-if [[ $have_libsamplerate = "yes" ]] ; then
- echo "Configured to build tests/resample-sndfile using libsndfile"
- echo ""
-else
- echo "Could not find libsndfile - needed if you want to"
- echo "compile tests/resample-sndfile"
- echo ""
-fi
-
-if [[ $have_libsamplerate = "yes" ]] ; then
- echo "Configured to build tests/compareresample to compare against"
- echo "Erik de Castro Lopo's libsamplerate library."
- echo ""
-else
- echo "Could not find libsamplerate - only needed if you want to"
- echo "compile tests/compareresample to compare their performance."
- echo ""
-fi
-
-echo "Type 'configure --help' to see options."
-echo ""
-echo "Type 'make' to build libresample and tests."
diff --git a/docs/Doxyfile b/docs/Doxyfile
new file mode 100644
index 0000000..b341ce8
--- /dev/null
+++ b/docs/Doxyfile
@@ -0,0 +1,1417 @@
+# Doxyfile 1.5.6
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = libresample
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER = 0.1.3
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = docs
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
+# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
+# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish,
+# and Ukrainian.
+
+OUTPUT_LANGUAGE = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member
+# documentation.
+
+DETAILS_AT_TOP = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL = NO
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT = NO
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page. This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = include src
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code. Otherwise they will link to the documentstion.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+
+GENERATE_DOCSET = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID = org.doxygen.Project
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to FRAME, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature. Other possible values
+# for this tag are: HIERARCHIES, which will generate the Groups, Directories,
+# and Class Hiererachy pages using a tree view instead of an ordered list;
+# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
+# disables this behavior completely. For backwards compatibility with previous
+# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
+# respectively.
+
+GENERATE_TREEVIEW = NONE
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE = 10
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = NO
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME = FreeSans
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is enabled by default, which results in a transparent
+# background. Warning: Depending on the platform used, enabling this option
+# may lead to badly anti-aliased labels on the edges of a graph (i.e. they
+# become hard to read).
+
+DOT_TRANSPARENT = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE = NO
diff --git a/include/libresample.h b/include/libresample.h
index ca08e04..11eca6a 100644
--- a/include/libresample.h
+++ b/include/libresample.h
@@ -11,6 +11,12 @@
**********************************************************************/
+/*!
+ * \file
+ * \brief libresample API
+ * \author Dominic Mazzoni
+ */
+
#ifndef LIBRESAMPLE_INCLUDED
#define LIBRESAMPLE_INCLUDED
@@ -18,14 +24,74 @@
extern "C" {
#endif /* __cplusplus */
+/*!
+ * \brief Create a resampler
+ *
+ * \param highQuality Set this argument to non-zero to enable higher quality
+ * resampling.
+ * \param minFactor This is the minimum resampling factor that will be used for
+ * this resampler. The resampling factor is calculated in the following
+ * way: ( from sample rate / to sample rate ).
+ * \param maxFactor This is the maximum resampling factor that will be used for
+ * this resampler.
+ *
+ * Use this function to create a new resampler that will maintain state
+ * information about the stream of audio being resampled.
+ *
+ * \return A handle to a new resampler
+ */
void *resample_open(int highQuality,
double minFactor,
double maxFactor);
+/*!
+ * \brief Duplicate a resampler
+ *
+ * \param handle the resampler to duplicate
+ *
+ * \return A new handle to a resampler, initialized with the same parameters
+ * used to create the original resampler.
+ */
void *resample_dup(const void *handle);
+/*!
+ * \brief Get filter width for resampler
+ *
+ * \param handle the resampler
+ *
+ * \return the filter width.
+ */
int resample_get_filter_width(const void *handle);
+/*!
+ * \brief Resample a chunk of audio
+ *
+ * \param handle the resampler
+ * \param factor the resampling factor. This factor should be calculated as
+ * ( from sample rate / to sample rate ). So, for converting from 8 kHz
+ * to 16 kHz, this value would be 2.0.
+ * \param inBuffer the input buffer for audio to resample.
+ * \param inBufferLen the number of samples in the input buffer
+ * \param lastFlag Set this argument to non-zero if the data in the input buffer
+ * is known to be the end of a stream. This would be used if you're
+ * resampling a file, for example.
+ * \param inBufferUsed This is an output parameter that indicates how many
+ * samples were consumed from the input buffer. Generally, this function
+ * is called in a loop until you know that the entire input buffer has
+ * been consumed, as it may take multiple calls to complete.
+ * \param outBuffer This is the output buffer. This function will write the
+ * resampled audio into this buffer.
+ * \param outBufferLen This parameter specifies how many samples there is room
+ * for in the output buffer.
+ *
+ * This is the main function used for resampling audio. It should be called
+ * in a loop until all of the data from the input buffer is consumed, or the
+ * output buffer has been filled.
+ *
+ * \return the number of samples written to the output buffer. If the return
+ * value is equal to the value provided in the outBufferLen parameter,
+ * then the output buffer has been filled.
+ */
int resample_process(void *handle,
double factor,
float *inBuffer,
@@ -35,6 +101,16 @@ int resample_process(void *handle,
float *outBuffer,
int outBufferLen);
+/*!
+ * \brief Close a resampler
+ *
+ * \param handle the resampler to close
+ *
+ * Use this function to release a handle to a resampler that was created using
+ * either resample_open() or resample_dup().
+ *
+ * \return nothing.
+ */
void resample_close(void *handle);
#ifdef __cplusplus
diff --git a/install-sh b/install-sh
deleted file mode 100755
index e9de238..0000000
--- a/install-sh
+++ /dev/null
@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
diff --git a/libresample.pc.in b/libresample.pc.in
new file mode 100644
index 0000000..c984e74
--- /dev/null
+++ b/libresample.pc.in
@@ -0,0 +1,7 @@
+prefix=${CMAKE_INSTALL_PREFIX}
+
+Name: libresample
+Description: A real-time library for audio sampling rate conversion
+Version: 0.1.3
+Cflags: ${CMAKE_C_FLAGS}
+Libs: ${CMAKE_SHARED_LINKER_FLAGS} -lm
diff --git a/src/configtemplate.h b/src/configtemplate.h
index 94ae1ce..bc1cd71 100644
--- a/src/configtemplate.h
+++ b/src/configtemplate.h
@@ -3,5 +3,5 @@
use this file as a template to create config.h
*/
-#undef HAVE_INTTYPES_H
+#cmakedefine HAVE_INTTYPES_H
diff --git a/src/resample_defs.h b/src/resample_defs.h
index 576c1bc..ccaf3ee 100644
--- a/src/resample_defs.h
+++ b/src/resample_defs.h
@@ -52,7 +52,7 @@
#define SGN(x) ((x)<0 ?(-1):((x)==0?(0):(1)))
#endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
#include <inttypes.h>
typedef char BOOL;
typedef int32_t WORD;
diff --git a/win/libresample.dsp b/win/libresample.dsp
deleted file mode 100644
index 4ebb51e..0000000
--- a/win/libresample.dsp
+++ /dev/null
@@ -1,116 +0,0 @@
-# Microsoft Developer Studio Project File - Name="libresample" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-CFG=libresample - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "libresample.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "libresample.mak" CFG="libresample - Win32 Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "libresample - Win32 Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "libresample - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF "$(CFG)" == "libresample - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"libresample.lib"
-
-!ELSEIF "$(CFG)" == "libresample - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"libresampled.lib"
-
-!ENDIF
-
-# Begin Target
-
-# Name "libresample - Win32 Release"
-# Name "libresample - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=..\src\filterkit.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\src\resample.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\src\resamplesubs.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\src\filterkit.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\include\libresample.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\src\resample_defs.h
-# End Source File
-# End Group
-# End Target
-# End Project
