File smp_utils.changes of Package smp_utils
-------------------------------------------------------------------
Wed Nov 11 13:27:49 UTC 2020 - Jan Engelhardt <jengelh@inai.de>
- Add missing ldconfig calls for libsmputils1-1.
-------------------------------------------------------------------
Thu Apr 16 13:33:25 UTC 2020 - Martin Pluskal <mpluskal@suse.com>
- Update to version 0.99:
- smp_discover(_list): add --dsn option to show
device slot number in single line per phy summary
- attached SAS device type, word SAS added (spl4r01)
- add SAS connector types, shared with NVMe (ses3r8)
- add buffered phy burst size field (spl4r07)
- add attached apta capable field
- update phy capabilities decode (spl5r02)
- use Report general to get number phys rather
than loop until an error occurs
- smp_rep_general: add extended fairness field
- add initial time to delay expander forward open
indication field
- add external port field (spl5r02)
- smp_phy_test: change default linkrate from 3 to 6 Gbps
which is value 0xa
- smp_conf_phy_event: fix file pointer leak
- add G5 (22.5 Gbps for SAS-4) settings [spl4r06]
- convert many two valued ints to bools
- smp_lib:
- add smp_get_connector_type_str(), smp_get_num_nomult()
and smp_get_llnum_nomult()
- add dStrHexErr() and dStrHexStr()
- add hex2stdout, hex2stderr and hex2str
- add smp_is_big_endian(), smp_all_zeros() and
smp_all_ffs()
- add sg_unaligned.h and sg_pr2serr.h headers
- change connector name: 'SAS SlimLine' to 'SlimSAS'
- sync with spl5r08
- cleanup configure.ac + Makefile.am
- update BSD license from 3 to 2 clause aka FreeBSD
license (without reference to FreeBSD project)
- debian: bump compat file contents from 7 to 10
- Drop no longer needed sysmacros.patch
-------------------------------------------------------------------
Wed Aug 1 14:19:38 UTC 2018 - schwab@suse.de
- sysmacros.patch: Include <sys/sysmacros.h> for major/minor/makedev
-------------------------------------------------------------------
Wed Mar 25 12:46:15 UTC 2015 - p.drouand@gmail.com
- Update to version 0.98
* add Linux aacraid support, interface name : aac
- device name has form /dev/aac[N[,E_ID]]
* smp_discover, smp_discover_list: in 1 line summary use
routing attribute "U" instead of "T" if "table to
table supported" set in report general response
- output device slot (group) number if len > 109
- add 'attached persistent capable' bit (spl3r2)
- add pwr_dis_* fields (spl3r3)
- add '--cap' option to decode phy capabilities
- change 'end device' to 'SAS or SATA device'
* smp_discover: '-mm' produces full output for each phy
* smp_rep_broadcast: add broadcast type names
* smp_general: add 'initiates ssp close' and 'ssp
maximum connect time limit' fields (spl3r04)
* add support for mpt3ctl (Linux LSI 12 Gbps HBAs)
* change binary install from /usr/sbin to /usr/bin since
sbin caused problems
* examples folder scripts cleanup
* make code more C11/C++ friendly
-------------------------------------------------------------------
Thu Jun 13 14:33:43 UTC 2013 - jengelh@inai.de
- Update to new upstream release 0.95
* mpt: cope with mpt2 ioctl that uses a different magic number
- Update to new upstream release 0.96
* New utilities: smp_conf_zone_perm_tbl, smp_conf_zone_man_pass,
smp_conf_zone_phy_info, smp_ena_dis_zoning, smp_rep_broadcast,
smp_rep_phy_event, smp_rep_phy_event_list,
smp_rep_self_conf_stat, smp_rep_zone_man_pass,
smp_rep_zone_perm_tbl, smp_zone_activate, smp_zoned_broadcast,
smp_zone_lock, smp_zone_unlock:
* Allow specifying --phy= IDs up to 254
- Update to new upstream release 0.97
* New utilitiy: smp_conf_phy_event
* Synchronize to SPL-2 r03
* smp_rep_phy_event, smp_rep_phy_event_list: add --enumerate
option to list Phy Event Source names
- Now builds using autotools, changed %build/%install accordingly.
- Remove smp_utils-Makefile.diff (no longer applicable),
smp_utils-compile-fixes (no longer applies)
- Simplify filelists. Remove redundant %clean section.
-------------------------------------------------------------------
Fri Mar 1 11:54:46 UTC 2013 - cfarrell@suse.com
- license update: BSD-3-Clause and GPL-2.0
See mptctl.h
-------------------------------------------------------------------
Thu Feb 28 06:00:53 UTC 2013 - coolo@suse.com
- update license to new format
-------------------------------------------------------------------
Fri Sep 30 16:16:53 UTC 2011 - uli@suse.com
- cross-build fix: use %__cc macro
-------------------------------------------------------------------
Thu Mar 12 15:47:37 CET 2009 - hare@suse.de
- Update to smp_utils-0.94 (bnc#483393)
- smp_discover: sync to sas2r15
- smp_discover_list: sync to sas2r15
- smp_rep_general: sync to sas2r15
- smp_rep_exp_route_tbl: sync to sas2r15
- smp_lib: sync to sas2r15
- sgv4: more detail in error messages
- sgv4: drop scsi.h include, gives problems with lk 2.6.27
- mpt: allow either /dev/mptctl or /dev/mpt2ctl [10;220-221]
- warn if target SAS address is 0x00000000 when -v given
-------------------------------------------------------------------
Fri May 23 10:05:31 CEST 2008 - hare@suse.de
- using 'Provides' to clean update dependency
-------------------------------------------------------------------
Thu Apr 24 15:26:56 CEST 2008 - hare@suse.de
- Split off from original scsi package.
