Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
shells
bash51
bash.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File bash.changes of Package bash51
------------------------------------------------------------------- Tue Sep 27 07:44:16 UTC 2022 - Dr. Werner Fink <werner@suse.de> - Modernize run-tests ------------------------------------------------------------------- Sat Sep 24 13:57:27 UTC 2022 - Christopher Yeleighton <giecrilj@stegny.2a.pl> - add checks ------------------------------------------------------------------- Tue Sep 20 06:59:04 UTC 2022 - Dr. Werner Fink <werner@suse.de> - Enable parallel builds by splitting clean and all at make time (Thanks to Christopher Yeleighton) - Do not copy more than 1 byte for \(aq becoming a "'" in quotes-man2html.patch ------------------------------------------------------------------- Mon Sep 19 13:11:05 UTC 2022 - Dr. Werner Fink <werner@suse.de> - Small change in quotes-man2html.patch * Use a simple "'" aka quote instead of "′" for "\(aq" ------------------------------------------------------------------- Thu Sep 15 13:09:24 UTC 2022 - Dr. Werner Fink <werner@suse.de> - Add patch quotes-man2html.patch * Fix boo#1203091 -- BASH(1) Manual Page: Unprocessed macro aq ------------------------------------------------------------------- Thu Apr 28 19:00:17 UTC 2022 - Dirk Müller <dmueller@suse.com> - use https:// for source urls ------------------------------------------------------------------- Thu Mar 24 14:37:18 UTC 2022 - Dr. Werner Fink <werner@suse.de> - Do use old legacy PreReq to get bash installed before bash-sh but do not require bash-sh by bash (bsc#1197448) ------------------------------------------------------------------- Thu Feb 24 08:17:32 UTC 2022 - Dr. Werner Fink <werner@suse.de> - Add signatures files of the upstream patches as well ------------------------------------------------------------------- Wed Feb 23 16:49:10 UTC 2022 - Bernhard Wiedemann <bwiedemann@suse.com> - Verify upstream release signatures ------------------------------------------------------------------- Fri Jan 14 11:57:21 UTC 2022 - Dr. Werner Fink <werner@suse.de> - Update bash 5.1 to patch level 16 * Add official patch bash51-013 Bash did not always perform tilde expansion following an unquoted colon on the rhs of an assignment statement in posix mode. * Add official patch bash51-014 Bash may produce corrupted input if a multibyte character spans a 512-byte boundary while reading the output of a command substitution. * Add official patch bash51-015 There are some characters (e.g., cyrillic) that can't be displayed using certain single-byte encodings (e.g., cp1251) because the negative signed int is interpreted as EOF and not displayed. * Add official patch bash51-016 Multiple `!' tokens should toggle negation of an expression in a [[ conditional command, instead of simply negating the expression. ------------------------------------------------------------------- Fri Dec 3 13:59:00 UTC 2021 - Dirk Müller <dmueller@suse.com> - avoid duplicating COPYING file in bash-doc (already in main package in licensedir) ------------------------------------------------------------------- Thu Nov 18 10:28:52 UTC 2021 - Dr. Werner Fink <werner@suse.de> - Update bash 5.1 to patch level 12 * Add official patch bash51-009 The bash malloc implementation of malloc_usable_size() does not follow the specification. This can cause library functions that use it to overwrite memory bounds checking. * Add official patch bash51-010 If `wait -n' is interrupted by a trapped signal other than SIGINT, it does not completely clean up state, and that can prevent subsequent calls to `wait -n' from working correctly. * Add official patch bash51-011 When reading a compound assignment, and running it through the parser to split it into words, we need to save and restore any alias we're currently expanding. * Add official patch bash51-012 There is a possible race condition that arises when a child process receives a signal trapped by the parent before it can reset the signal dispositions. The child process is not supposed to trap the signal in this circumstance. ------------------------------------------------------------------- Fri Oct 22 09:28:06 UTC 2021 - Stefan Schubert <schubi@suse.de> - Using package bash-sh instead of the update-alternative mechanism. ------------------------------------------------------------------- Thu Sep 30 13:42:48 UTC 2021 - Andreas Schwab <schwab@suse.de> - Install bash_builtins manpage under the correct name ------------------------------------------------------------------- Mon Jul 26 08:03:24 UTC 2021 - Dr. Werner Fink <werner@suse.de> - Use a get_version_number.sh script ------------------------------------------------------------------- Fri Jul 23 12:18:48 UTC 2021 - Callum Farmer <gmbr3@opensuse.org> - Get patch lvl by running command to find it instead of hardcoding - Remove old SUSE RPM constructs - Clean spec file ------------------------------------------------------------------- Fri May 28 13:53:55 UTC 2021 - Dr. Werner Fink <werner@suse.de> - Use well defined HOSTTYPE, as well as OS, VENDOR, and MACHTYPE (boo#1186296) ------------------------------------------------------------------- Wed May 5 14:59:54 UTC 2021 - Dr. Werner Fink <werner@suse.de> - Add official patch bash51-005 * Fix two memory leaks when assigning arrays using compound assignment syntax. - Add official patch bash51-006 * Make sure child processes forked to run command substitutions are in the proper process group. - Add official patch bash51-007 * The code to check readline versions in an inputrc file had the sense of the comparisons reversed. - Add official patch bash51-008 * Process substitution FIFOs opened by child processes as targets of redirections were not removed appropriately, leaving remnants in the file system. ------------------------------------------------------------------- Mon Jan 11 12:00:19 UTC 2021 - Dr. Werner Fink <werner@suse.de> - Update to final bash 5.1 * Which is mainly the last rc3 veresion - Add official patch bash51-001 There is a missing dependency on a constructed file, which can cause highly parellel builds to fail. - Add official patch bash51-002 If there are no jobs, and the `-n' and `-p' options are both supplied to `wait', bash can assign a value to the variable name specified with `-p' instead of leaving it unset. - Add official patch bash51-003 Bash does not put a command substitution process that is started to perform an expansion in a child process into the right process group where it can receive keyboard-generated signals. - Add official patch bash51-004 If a key-value compound array assignment to an associative array is supplied as an assignment statement argument to the `declare' command that declares the array, the assignment doesn't perform the correct word expansions. This patch makes key-value assignment and subscript assignment perform the same expansions when they're supplied as an argument to `declare'. ------------------------------------------------------------------- Mon Nov 23 08:28:20 UTC 2020 - Dr. Werner Fink <werner@suse.de> - Update to bash 5.1 rc3 * The `assoc_expand_once' option now affects the evaluation of the -v primary to test and the [[ compound command. ------------------------------------------------------------------- Thu Nov 19 15:47:13 UTC 2020 - Ludwig Nussel <lnussel@suse.de> - remove obsolete info macros ------------------------------------------------------------------- Tue Nov 10 13:31:20 UTC 2020 - Dr. Werner Fink <werner@suse.de> - Update to bash 5.1 rc2 * Process substitutions started from an interactive shell no longer have their standard input implicitly redirected from /dev/null. * Fixed an issue with setting the SIGINT trap handler in an interactive shell when temporarily running $PROMPT_COMMAND non-interactively. ------------------------------------------------------------------- Fri Oct 16 07:08:31 UTC 2020 - Ludwig Nussel <lnussel@suse.de> - prepare usrmerge (boo#1029961) ------------------------------------------------------------------- Mon Oct 12 17:19:06 UTC 2020 - Dr. Werner Fink <werner@suse.de> - Update to bash 5.1 rc1 * `bind -x' now supports different bindings for different editing modes and keymaps. * Bash attempts to optimize the number of times it forks when executing commands in subshells and from `bash -c'. * Here documents and here strings now use pipes for the expanded document if it's smaller than the pipe buffer size, reverting to temporary files if it's larger. * There are new loadable builtins: mktemp, accept, mkfifo, csv, cut/lcut * In posix mode, `trap -p' now displays signals whose disposition is SIG_DFL and those that were SIG_IGN when the shell starts. * The shell now expands the history number (e.g., in PS1) even if it is not currently saving commands to the history list. * `read -e' may now be used with arbitrary file descriptors (`read -u N'). * The `select' builtin now runs traps if its internal call to the read builtin is interrupted by a signal. * SRANDOM: a new variable that expands to a 32-bit random number that is not produced by an LCRNG, and uses getrandom/getentropy, falling back to /dev/urandom or arc4random if available. There is a fallback generator if none of these are available. * shell-transpose-words: a new bindable readline command that uses the same definition of word as shell-forward-word, etc. * The shell now adds default bindings for shell-forward-word, shell-backward-word, shell-transpose-words, and shell-kill-word. * Bash now allows ARGV0 appearing in the initial shell environment to set $0. * If `unset' is executed without option arguments, bash tries to unset a shell function if a name argument cannot be a shell variable name because it's not an identifier. * The `test -N' operator uses nanosecond timestamp granularity if it's available. * Bash posix mode now treats assignment statements preceding shell function definitions the same as in its default mode, since POSIX has changed and no longer requires those assignments to persist after the function returns (POSIX interp 654). * BASH_REMATCH is no longer readonly. * wait: has a new -p VARNAME option, which stores the PID returned by `wait -n' or `wait' without arguments. * Sorting the results of pathname expansion now uses byte-by-byte comparisons if two strings collate equally to impose a total order; the result of a POSIX interpretation. * Bash now allows SIGINT trap handlers to execute recursively. * Bash now saves and restores state around setting and unsetting posix mode, instead of having unsetting posix mode set a known state. * Process substitution is now available in posix mode. * READLINE_MARK: a new variable available while executing commands bound with `bind -x', contains the value of the mark. * Bash removes SIGCHLD from the set of blocked signals if it's blocked at shell startup. * `test -v N' can now test whether or not positional parameter N is set. * `local' now honors the `-p' option to display all local variables at the current context. * The `@a' variable transformation now prints attributes for unset array variables. * The `@A' variable transformation now prints a declare command that sets a variable's attributes if the variable has attributes but is unset. * `declare' and `local' now have a -I option that inherits attributes and value from a variable with the same name at a previous scope. * When run from a -c command, `jobs' now reports the status of completed jobs. * New `U', `u', and `L' parameter transformations to convert to uppercase, convert first character to uppercase, and convert to lowercase, respectively. * PROMPT_COMMAND: can now be an array variable, each element of which can contain a command to be executed like a string PROMPT_COMMAND variable. * `ulimit' has a -R option to report and set the RLIMIT_RTTIME resource. * Associative arrays may be assigned using a list of key-value pairs within a compound assignment. Compound assignments where the words are not of the form [key]=value are assumed to be key-value assignments. A missing or empty key is an error; a missing value is treated as NULL. Assignments may not mix the two forms. * New `K' parameter transformation to display associative arrays as key- value pairs. * Writing history to syslog now handles messages longer than the syslog max length by writing multiple messages with a sequence number. * SECONDS and RANDOM may now be assigned using arithmetic expressions, since they are nominally integer variables. LINENO is not an integer variable. * Bash temporarily suppresses the verbose option when running the DEBUG trap while running a command from the `fc' builtin. * `wait -n' now accepts a list of job specifications as arguments and will wait for the first one in the list to change state. * The associative array implementation can now dynamically increase the size of the hash table based on insertion patterns. * HISTFILE is now readonly in a restricted shell. * The bash malloc now returns memory that is 16-byte aligned on 64-bit systems. * If the hash builtin is listing hashed filenames portably, don't print anything if the table is empty. * GLOBIGNORE now ignores `.' and `..' as a terminal pathname component. * Bash attempts to optimize away forks in the last command in a function body under appropriate circumstances. * The globbing code now uses fnmatch(3) to check collation elements (if available) even in cases without multibyte characters. * The `fg' and `bg' builtins now return an error in a command substitution when asked to restart a job inherited from the parent shell. * The shell now attempts to unlink all FIFOs on exit, whether a consuming process has finished with them or not. * There is a new contributed loadable builtin: asort. - Remove patch bash-4.0-security.patch as now solved upstream - Port and modify patches * bash-2.03-manual.patch * bash-3.2-printf.patch * bash-4.0-setlocale.dif * bash-4.1-completion.dif * bash-4.2-nscdunmap.dif * bash-4.3-2.4.4.patch * bash-4.3-loadables.dif * bash-4.3-pathtemp.patch * bash-4.3-sigrestart.patch - Port and rename patch bash-5.0.dif which is now bash-5.1.dif ------------------------------------------------------------------- Wed Sep 23 16:30:31 UTC 2020 - Stefan Dirsch <sndirsch@suse.com> - dot.profile: moved example for user specific LANG setting from .profile to .i18n (x11-tools package) skeleton file (boo#1158724) ------------------------------------------------------------------- Sun Aug 2 20:49:58 UTC 2020 - Matthias Eliasson <elimat@opensuse.org> - Bump bpatchlvl version to 18 which was missed in previous change ------------------------------------------------------------------- Tue Jul 14 07:20:07 UTC 2020 - Dr. Werner Fink <werner@suse.de> - Add official patch bash50-018 * In certain cases, bash does not perform quoted null removal on patterns that are used as part of word expansions such as ${parameter##pattern}, so empty patterns are treated as non-empty. ------------------------------------------------------------------- Sat May 9 07:03:45 UTC 2020 - Dr. Werner Fink <werner@suse.de> - Add official patch bash50-017 * There were cases where patch 16 reaped process substitution file descriptors (or FIFOs) and processes to early. This is a better fix for the problem that bash50-016 attempted to solve. - Remove temporary patch bash50-fix-016-close-new-fifos.patch ------------------------------------------------------------------- Sun Apr 19 08:03:03 UTC 2020 - Thorsten Kukuk <kukuk@suse.com> - Fix usage of update-alternatives ------------------------------------------------------------------- Fri Apr 3 08:28:08 UTC 2020 - Dr. Werner Fink <werner@suse.de> - Add temporary patch bash50-fix-016-close-new-fifos.patch from upstream to fix upstream patch bash50-016 ------------------------------------------------------------------- Mon Feb 24 09:21:01 UTC 2020 - Ludwig Nussel <lnussel@suse.de> - move man pages back to main package. It's just 100k ------------------------------------------------------------------- Thu Feb 13 10:56:07 UTC 2020 - Dr. Werner Fink <werner@suse.de> - Add official patch bash50-012 When using previous-history to go back beyond the beginning of the history list, it's possible to move to an incorrect partial line. - Add official patch bash50-013 Reading history entries with timestamps can result in history entries joined by linefeeds. - Add official patch bash50-014 If the current line is empty, using the emacs C-xC-e binding to enter the editor will edit the previous command instead of the current (empty) one. - Add official patch bash50-015 If alias expansion is enabled when processing the command argument to the `-c' option, an alias is defined in that command, and the command ends with the invocation of that alias, the shell's command parser can prematurely terminate before the entire command is executed. - Add official patch bash50-016 Bash waits too long to reap /dev/fd process substitutions used as redirections with loops and group commands, which can lead to file descriptor exhaustion. ------------------------------------------------------------------- Wed Oct 16 12:49:36 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Remove PILOTPORT and PILOTRATE environment variable from default ~/.bashrc (/etc/skel/.bashrc) (bsc#1123510) - Move definitions of environment variables from ~/.bashrc to ~/.profile (/etc/skel/.profile) ------------------------------------------------------------------- Thu Sep 19 12:00:32 UTC 2019 - Ludwig Nussel <lnussel@suse.de> - Do not recommend lang package. The lang package already has a supplements. ------------------------------------------------------------------- Mon Sep 9 08:06:54 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Use new version scheme which now includes patch level as well - Add official patch bash50-010 * Change posix mode bahviour * Remove patch assignment-preceding-builtin.patch - Add official patch bash50-011 The conditional command did not perform appropriate quoted null character removal on its arguments, causing syntax errors and attempts to stat invalid pathnames. ------------------------------------------------------------------- Wed Sep 4 09:08:53 UTC 2019 - Ludwig Nussel <lnussel@suse.de> - Avoid pulling in bash-doc into every installation. Instead of recommeding it, supplement the documentation pattern. ------------------------------------------------------------------- Thu Aug 15 13:43:55 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Add official patch bash50-008 When HISTSIZE is set to 0, history expansion can leave the history length set to an incorrect value, leading to subsequent attempts to access invalid memory. - Add official patch bash50-009 The history file reading code doesn't close the file descriptor open to the history file when it encounters a zero-length file. ------------------------------------------------------------------- Tue Apr 23 12:58:16 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Add official patch bash50-004 * In bash-5.0, the `wait' builtin without arguments waits for all children of the shell. This includes children it `inherited' at shell invocation time. This patch modifies the behavior to not wait for these inherited children, some of which might be long-lived. - Add official patch bash50-005 * In certain cases, bash optimizes out a fork() call too early and prevents traps from running. - Add official patch bash50-006 * Bash-5.0 did not build successfully if SYSLOG_HISTORY was defined without also defining SYSLOG_SHOPT. - Add official patch bash50-007 * Running `exec' when job control was disabled, even temporarily, but after it had been initialized, could leave the terminal in the wrong process group for the executed process. ------------------------------------------------------------------- Thu Apr 4 07:18:57 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Add temporary fix from upstream for boo#1128936 ------------------------------------------------------------------- Thu Mar 21 08:24:11 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Add patch assignment-preceding-builtin.patch from upstream mailing list. Note that this break backward behaviour with bash-4.4 but implies that POSIX mode is more correct ------------------------------------------------------------------- Thu Mar 21 07:57:41 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Replace the temporary patch with official bash50-003 ------------------------------------------------------------------- Mon Mar 11 07:20:37 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Update temporary patch from upstream to make sed testsuite work again ------------------------------------------------------------------- Wed Mar 6 11:06:10 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Requires(postun) -> Requires(preun) ------------------------------------------------------------------- Tue Mar 5 12:04:07 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Do not link /bin/sh as slave alternative to /usr/bin/sh ------------------------------------------------------------------- Mon Mar 4 14:30:38 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Add temporary patch from upstream to fix boo#1127700 ------------------------------------------------------------------- Mon Mar 4 10:14:12 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Refine and harden update-alternatives work flow - Move header and Makefile from bash-loadables to bash-devel ------------------------------------------------------------------- Fri Mar 1 14:01:16 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Make update-alternatives work flawless ------------------------------------------------------------------- Fri Feb 8 10:30:17 UTC 2019 - Jan Engelhardt <jengelh@inai.de> - Put "sh" under control of update-alternatives ------------------------------------------------------------------- Thu Feb 7 15:06:12 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Add upstream patches bash50-001 and bash50-002 ------------------------------------------------------------------- Wed Jan 9 12:47:04 UTC 2019 - Dr. Werner Fink <werner@suse.de> - Update to bash 5.0 (final) a. Tilde expansion isn't performed on indexed array subscripts, even for backwards compatibility. b. The shell doesn't exit in posix mode if the eval builtin gets a parse error when run by the command builtin. c. Fixed a bug that caused a shell comment in an alias to not find the end of the alias properly. d. Reverted a change from April, 2018 that caused strings containing backslashes to be flagged as glob patterns. - Modify patches * bash-2.03-manual.patch * bash-4.3-loadables.dif * bash-5.0.dif ------------------------------------------------------------------- Fri Dec 21 13:34:47 UTC 2018 - Dr. Werner Fink <werner@suse.de> - Update to bash 5.0 rc1 a. Fix to initial word completion detection code. b. Fixed a bug that caused issues with assignment statements containing ^A in the value assigned when IFS contains ^A. c. Added a fallback to fnmatch() when strcoll can't correctly deal with bracket expression character equivalence classes. d. Fixed a bug that caused $BASH_COMMAND to contain the trap handler command when running a trap handler containing [[ or (( commands. e. Fixed a bug that caused nameref assignments in the temporary environment to potentially create variables with invalid names. f. Fixed a bug that caused `local -' to turn off alias expansion in scripts. g. Fixed a parser issue with a command string containing EOF after an invalid command as an argument to a special builtin not causing a posix-mode shell to exit. h. Made a slight change to the FNV-1 string hash algorithm used for associative arrays (corrected the initial seed). a. The `select' command now supports command forms without a word list following `in'. ------------------------------------------------------------------- Thu Nov 29 08:22:16 UTC 2018 - Dr. Werner Fink <werner@suse.de> - Update to bash 5.0 beta2 ii. Associative and indexed arrays now allow subscripts consisting solely of whitespace. jj. `checkwinsize' is now enabled by default. kk. The `localvar_unset' shopt option is now visible and documented. ll. The `progcomp_alias' shopt option is now visible and documented. mm. The signal name processing code now understands `SIGRTMIN+n' all the way up to SIGRTMAX. nn. There is a new `seq' loadable builtin. oo. Trap execution now honors the (internal) max invocations of `eval', since traps are supposed to be executed as if using `eval'. pp. The $_ variable doesn't change when the shell executes a command that forks. qq. The `kill' builtin now supports -sSIGNAME and -nSIGNUM, even though conforming applications aren't supposed to use them. rr. POSIX mode now enables the `shift_verbose' option. - Modify patches * bash-2.03-manual.patch * bash-3.0-evalexp.patch * bash-3.2-printf.patch * bash-4.0-security.patch * bash-4.1-completion.dif * bash-4.3-2.4.4.patch * bash-4.3-SJIS.patch * bash-4.3-extra-import-func.patch * bash-4.3-sigrestart.patch * bash-5.0.dif - Add temporary upstream patch upstream.patch ------------------------------------------------------------------- Thu Sep 20 08:56:46 UTC 2018 - Dr. Werner Fink <werner@suse.de> - Update to bash 5.0 beta a. The `wait' builtin can now wait for the last process substitution created. b. There is an EPOCHSECONDS variable, which expands to the time in seconds since the Unix epoch. c. There is an EPOCHREALTIME variable, which expands to the time in seconds since the Unix epoch with microsecond granularity. d. New loadable builtins: rm, stat, fdflags. e. BASH_ARGV0: a new variable that expands to $0 and sets $0 on assignment. f. When supplied a numeric argument, the shell-expand-line bindable readline command does not perform quote removal and suppresses command and process substitution. g. `history -d' understands negative arguments: negative arguments offset from the end of the history list. h. The `name' argument to the `coproc' reserved word now undergoes word expansion, so unique coprocs can be created in loops. i. A nameref name resolution loop in a function now resolves to a variable by that name in the global scope. j. The `wait' builtin now has a `-f' option, which signfies to wait until the specified job or process terminates, instead of waiting until it changes state. k. There is a define in config-top.h that allows the shell to use a static value for $PATH, overriding whatever is in the environment at startup, for use by the restricted shell. l. Process substitution does not inherit the `v' option, like command substitution. m. If a non-interactive shell with job control enabled detects that a foreground job died due to SIGINT, it acts as if it received the SIGINT. n. The SIGCHLD trap is run once for each exiting child process even if job control is not enabled when the shell is in Posix mode. o. A new shopt option: localvar_inherit; if set, a local variable inherits the value of a variable with the same name at the nearest preceding scope. p. `bind -r' now checks whether a key sequence is bound before binding it to NULL, to avoid creating keymaps for a multi-key sequence. q. A numeric argument to the line editing `operate-and-get-next' command specifies which history entry to use. r. The positional parameters are now assigned before running the shell startup files, so startup files can use $@. s. There is a compile-time option that forces the shell to disable the check for an inherited OLDPWD being a directory. t. The `history' builtin can now delete ranges of history entries using `-d start-end'. u. The `vi-edit-and-execute-command' bindable readline command now puts readline back in vi insertion mode after executing commands from the edited file. v. The command completion code now matches aliases and shell function names case-insensitively if the readline completion-ignore-case variable is set. w. There is a new `assoc_expand_once' shell option that attempts to expand associative array subscripts only once. x. The shell only sets up BASH_ARGV and BASH_ARGC at startup if extended debugging mode is active. The old behavior of unconditionally setting them is available as part of the shell compatibility options. y. The `umask' builtin now allows modes and masks greater than octal 777. z. The `times' builtin now honors the current locale when printing a decimal point. aa. There is a new (disabled by default, undocumented) shell option to enable and disable sending history to syslog at runtime. bb. Bash no longer allows variable assignments preceding a special builtin that changes variable attributes to propagate back to the calling environment unless the compatibility level is 44 or lower. cc. You can set the default value for $HISTSIZE at build time in config-top.h. dd. The `complete' builtin now accepts a -I option that applies the completion to the initial word on the line. ee. The internal bash malloc now uses mmap (if available) to satisfy requests greater than 128K bytes, so free can use mfree to return the pages to the kernel. ff. The shell doesn't automatically set BASH_ARGC and BASH_ARGV at startup unless it's in debugging mode, as the documentation has always said, but will dynamically create them if a script references them at the top level without having enabled debugging mode. gg. The localvar_inherit option will not attempt to inherit a value from a variable of an incompatible type (indexed vs. associative arrays, for example). hh. The `globasciiranges' option is now enabled by default; it can be set to off by default at configuration time. - Modify and port patches * bash-2.03-manual.patch * bash-3.0-evalexp.patch * bash-3.0-warn-locale.patch * bash-3.2-printf.patch * bash-4.0-security.patch * bash-4.0-setlocale.dif * bash-4.1-bash.bashrc.dif * bash-4.1-completion.dif * bash-4.2-nscdunmap.dif * bash-4.3-2.4.4.patch * bash-4.3-extra-import-func.patch * bash-4.3-loadables.dif * bash-4.3-sigrestart.patch * bash-4.3-winch.dif - Port and rename bash-4.4.dif which is now bash-5.0.dif - Delete not used patch bash-4.2-endpw.dif - Remove patch bash-memmove.patch now upstream - Add patch bash-4.3-SJIS.patch which is disabled by default ------------------------------------------------------------------- Sat Jul 7 05:03:48 UTC 2018 - bwiedemann@suse.com - Add bash-memmove.patch to make bash.html build reproducible (boo#1100488) ------------------------------------------------------------------- Mon Jun 4 09:21:15 UTC 2018 - werner@suse.de - In patch bash-4.4.dif avoid setgroups(2) but use initgroups(3) (boo#1095670) ------------------------------------------------------------------- Sat Jun 2 17:17:13 UTC 2018 - avindra@opensuse.org - Add patch 20, 21, 22 and 23 to bash-4.4-patches.tar.bz2 * 20: In circumstances involving long-running scripts that create and reap many processes, it is possible for the hash table bash uses to store exit statuses from asynchronous processes to develop loops. This patch fixes the loop causes and adds code to detect any future loops. * 21: A SIGINT received inside a SIGINT trap handler can possibly cause the shell to loop. * 22: There are cases where a failing readline command (e.g., delete-char at the end of a line) can cause a multi-character key sequence to `back up' and attempt to re-read some of the characters in the sequence. * 23: When sourcing a file from an interactive shell, setting the SIGINT handler to the default and typing ^C will cause the shell to exit. - remove bash-4.4-wait-sigint-handler.patch (upstreamed) ------------------------------------------------------------------- Wed Apr 18 10:49:26 UTC 2018 - werner@suse.de - Add patch bash-4.4-wait-sigint-handler.patch to fix bug bsc#1086247 that is repeating self inserting trap due external command in the trap. ------------------------------------------------------------------- Fri Mar 16 17:37:08 UTC 2018 - werner@suse.de - Make sure that correct readline-devel version is used (current 7.0) ------------------------------------------------------------------- Fri Mar 16 06:22:31 UTC 2018 - werner@suse.de - Correct documentation path ------------------------------------------------------------------- Mon Mar 12 15:28:24 UTC 2018 - werner@suse.de - Due package split removed patches (for the bots) * readline-6.2-xmalloc.dif * readline-6.2-endpw.dif * readline-6.3-destdir.patch * readline-6.2-metamode.patch * readline-7.0.dif * readline-6.3-input.dif * readline-5.2-conf.patch * readline-6.3-rltrace.patch ------------------------------------------------------------------- Mon Mar 12 14:12:52 UTC 2018 - schwab@suse.de - Split readline off into its own package ------------------------------------------------------------------- Tue Feb 27 14:26:53 UTC 2018 - werner@suse.de - Create readline-devel-static package to re-enable static libraries again (boo#1082913) ------------------------------------------------------------------- Thu Feb 22 15:10:29 UTC 2018 - fvogt@suse.com - Use %license (boo#1082318) ------------------------------------------------------------------- Tue Feb 6 23:25:18 UTC 2018 - avindra@opensuse.org - Add patch 19 to bash-4.4-patches.tar.bz2 * With certain values for PS1, especially those that wrap onto three or more lines, readline will miscalculate the number of invisible characters, leading to crashes and core dumps. ------------------------------------------------------------------- Tue Jan 30 01:42:43 UTC 2018 - avindra@opensuse.org - Add patches 13-18 to bash-4.4-patches.tar.bz2 * 13: If a here-document contains a command substitution, the command substitution can get access to the file descriptor used to write the here-document. * 14: Under some circumstances, functions that return via the `return' builtin do not clean up memory they allocated to keep track of FIFOs. * 15: Process substitution can leak internal quoting to the parser in the invoked subshell. * 16: Bash can perform trap processing while reading command substitution output instead of waiting until the command completes. * 17: There is a memory leak when `read -e' is used to read a line using readline. * 18: Under certain circumstances (e.g., reading from /dev/zero), read(2) will not return -1 even when interrupted by a signal. The read builtin needs to check for signals in this case. - partial cleanup with spec-cleaner ------------------------------------------------------------------- Wed Jan 24 12:40:17 UTC 2018 - werner@suse.de - Modify patch bash-4.3-pathtemp.patch to avoid crash at full file system (boo#1076909) ------------------------------------------------------------------- Fri Dec 8 06:12:43 UTC 2017 - werner@suse.de - Enable multibyte characters by default ------------------------------------------------------------------- Mon Sep 25 09:13:32 UTC 2017 - werner@suse.de - Modify patch bash-4.4.dif to let bashline.h install as well as this header file is included by general.h due to the same patch (boo#1060069) ------------------------------------------------------------------- Thu May 25 17:33:36 UTC 2017 - bwiedemann@suse.com - Make build reproducible in spite of profile based optimizations (boo#1040589) ------------------------------------------------------------------- Wed May 24 12:42:20 UTC 2017 - bwiedemann@suse.com - Allow to disable do_profiling in builds (related to boo#1040589) ------------------------------------------------------------------- Wed Apr 26 16:04:15 UTC 2017 - werner@suse.de - Simplify patch readline-5.2-conf.patch ------------------------------------------------------------------- Tue Apr 25 09:18:16 UTC 2017 - werner@suse.de - Do not throw info and manual pages away ------------------------------------------------------------------- Fri Feb 17 14:08:47 UTC 2017 - werner@suse.de - Remove bash-4.0-async-bnc523667.dif as this one is fixed (and was disabled and nobody had reported trouble) ------------------------------------------------------------------- Mon Jan 30 16:11:13 UTC 2017 - werner@suse.de - Add upstream patch readline70-002 which replace old one There is a race condition in add_history() that can be triggered by a fatal signal arriving between the time the history length is updated and the time the history list update is completed. A later attempt to reference an invalid history entry can cause a crash. - Add upstream patch readline70-003 Readline-7.0 uses pselect(2) to allow readline to handle signals that do not interrupt read(2), such as SIGALRM, before reading another character. The signal mask used in the pselect call did not take into account signals the calling application blocked before calling readline(). ------------------------------------------------------------------- Fri Jan 27 17:31:59 UTC 2017 - werner@suse.de - Add upstream patch bash44-006 Out-of-range negative offsets to popd can cause the shell to crash attempting to free an invalid memory block. - Remove patch popd-offset-overflow.patch to use bash44-006 - Add upstream patch bash44-007 When performing filename completion, bash dequotes the directory name being completed, which can result in match failures and potential unwanted expansion. - Duplicate bash44-007 as readline70-002 as it seems to be missed - Add upstream patch bash44-008 Under certain circumstances, bash will evaluate arithmetic expressions as part of reading an expression token even when evaluation is suppressed. This happens while evaluating a conditional expression and skipping over the failed branch of the expression. - Add upstream patch bash44-009 There is a race condition in add_history() that can be triggered by a fatal signal arriving between the time the history length is updated and the time the history list update is completed. A later attempt to reference an invalid history entry can cause a crash. - Add upstream patch bash44-010 Depending on compiler optimizations and behavior, the `read' builtin may not save partial input when a timeout occurs. - Add upstream patch bash44-011 Subshells begun to run command and process substitutions may attempt to set the terminal's process group to an incorrect value if they receive a fatal signal. This depends on the behavior of the process that starts the shell. - Add upstream patch bash44-012 When -N is used, the input is not supposed to be split using $IFS, but leading and trailing IFS whitespace was still removed. ------------------------------------------------------------------- Thu Jan 19 12:20:06 UTC 2017 - werner@suse.de - Remove -L option on screen call dues API change, now we depend on environment variables only. ------------------------------------------------------------------- Fri Dec 9 12:09:46 UTC 2016 - mliska@suse.cz - Enable -fprofile-correction to cover misleading profile created due to terminating_signal which does not return. ------------------------------------------------------------------- Mon Nov 28 11:41:49 UTC 2016 - werner@suse.de - Add upstream patch popd-offset-overflow.patch to fix boo#1010845 CVE-2016-9401: bash: popd controlled free (Segmentation fault) Remark: this is a simple Segmentation fault, no security risk ------------------------------------------------------------------- Thu Nov 17 09:27:21 UTC 2016 - werner@suse.de - Add upstream patch bash44-001 Bash-4.4 changed the way the history list is initially allocated to reduce the number of reallocations and copies. Users who set HISTSIZE to a very large number to essentially unlimit the size of the history list will get memory allocation errors - Add upstream patch bash44-002 Bash-4.4 warns when discarding NUL bytes in command substitution output instead of silently dropping them. This patch changes the warnings from one per NUL byte encountered to one warning per command substitution. - Drop no-null-warning.patch as bash44-002 is official replacement - Add upstream patch bash44-003 Specially-crafted input, in this case an incomplete pathname expansion bracket expression containing an invalid collating symbol, can cause the shell to crash. - Add upstream patch bash44-004 There is a race condition that can result in bash referencing freed memory when freeing data associated with the last process substitution. - Add upstream patch bash44-005 Under certain circumstances, a simple command is optimized to eliminate a fork, resulting in an EXIT trap not being executed. (boo#1008459) - Add upstream patch readline70-001 Readline-7.0 changed the way the history list is initially allocated to reduce the number of reallocations and copies. Users who set the readline history-size variable to a very large number to essentially unlimit the size of the history list will get memory allocation errors ------------------------------------------------------------------- Mon Oct 24 13:51:10 UTC 2016 - schwab@suse.de - no-null-warning.patch: Don't warn about null bytes in command substitution ------------------------------------------------------------------- Tue Oct 4 12:59:48 UTC 2016 - werner@suse.de - Avoid confusing library path ------------------------------------------------------------------- Fri Sep 16 10:41:30 UTC 2016 - werner@suse.de - Update bash 4.4 final * Latest bug fixes since 4.4 rc2 - Update readline 7.0 final * Latest bug fixes since 7.0 rc2 * New application-callable function: rl_pending_signal(): returns the signal number of any signal readline has caught but not yet handled. * New application-settable variable: rl_persistent_signal_handlers: if set to a non-zero value, readline will enable the readline-6.2 signal handler behavior in callback mode: handlers are installed when rl_callback_handler_install is called and removed removed when a complete line has been read. - Drop patch bash-4.3-async-bnc971410.dif as this one is part of 4.4 - Drop patch bash-3.2-longjmp.dif as now long time be fixed - Drop patch bash-4.3-headers.dif as loadables now simply work - Drop readline-6.1-wrap.patch as this seems to be fixed - Disable patch bash-4.0-async-bnc523667.dif for now as it seems to be fixed in an other way ------------------------------------------------------------------- Wed Sep 14 09:00:14 UTC 2016 - werner@suse.de - Update bash 4.4 rc2 -- Bugfixes - Update readline 7.0 rc2 -- Bugfixes ------------------------------------------------------------------- Mon Aug 1 13:47:05 UTC 2016 - werner@suse.de - Make clear that the files /etc/profile as well as /etc/bash.bashrc may source other files as well even if the bash does not. Therefore modify patch bash-4.1-bash.bashrc.dif (bsc#959755) ------------------------------------------------------------------- Thu Jul 14 12:43:08 UTC 2016 - werner@suse.de - Update bash 4.4 beta 2 * Value conversions (arithmetic expansions, case modification, etc.) now happen when assigning elements of an array using compound assignment. * There is a new option settable in config-top.h that makes multiple directory arguments to `cd' a fatal error. * Bash now uses mktemp() when creating internal temporary files; it produces a warning at build time on many Linux systems. - Update to readline library 7.0 beta 2 (not enabled as not standalone) * The default binding for ^W in vi mode now uses word boundaries specified by Posix (vi-unix-word-rubout is bindable command name). * rl_clear_visible_line: new application-callable function; clears all screen lines occupied by the current visible readline line. * rl_tty_set_echoing: application-callable function that controls whether or not readline thinks it is echoing terminal output. * Handle >| and strings of digits preceding and following redirection specifications as single tokens when tokenizing the line for history expansion. * Fixed a bug with displaying completions when the prefix display length is greater than the length of the completions to be displayed. * The :p history modifier now applies to the entire line, so any expansion specifying :p causes the line to be printed instead of expanded. ------------------------------------------------------------------- Tue Mar 8 14:49:41 UTC 2016 - werner@suse.de - Update bash 4.4 release candidate 1 * There is now a settable configuration #define that will cause the shell to exit if the shell is running setuid without the -p option and setuid to the real uid fails. * Command and process substitutions now turn off the `-v' option when executing, as other shells seem to do. * The default value for the `checkhash' shell option may now be set at compile time with a #define. * The `mapfile' builtin now has a -d option to use an arbitrary character as the record delimiter, and a -t option to strip the delimiter as supplied with -d. * The maximum number of nested recursive calls to `eval' is now settable in config-top.h; the default is no limit. * The `-p' option to declare and similar builtins will display attributes for named variables even when those variables have not been assigned values (which are technically unset). * The maximum number of nested recursive calls to `source' is now settable in config-top.h; the default is no limit. * All builtin commands recognize the `--help' option and print a usage summary. * Bash does not allow function names containing `/' and `=' to be exported. * The `ulimit' builtin has new -k (kqueues) and -P (pseudoterminals) options. * The shell now allows `time ; othercommand' to time null commands. * There is a new `--enable-function-import' configuration option to allow importing shell functions from the environment; import is enabled by default. * `printf -v var ""' will now set `var' to the empty string, as if `var=""' had been executed. * GLOBIGNORE, the pattern substitution word expansion, and programmable completion match filtering now honor the value of the `nocasematch' option. * There is a new ${parameter@spec} family of operators to transform the value of `parameter'. * Bash no longer attempts to perform compound assignment if a variable on the rhs of an assignment statement argument to `declare' has the form of a compound assignment (e.g., w='(word)' ; declare foo=$w); compound assignments are accepted if the variable was already declared as an array, but with a warning. * The declare builtin no longer displays array variables using the compound assignment syntax with quotes; that will generate warnings when re-used as input, and isn't necessary. * Executing the rhs of && and || will no longer cause the shell to fork if it's not necessary. * The `local' builtin takes a new argument: `-', which will cause it to save and the single-letter shell options and restore their previous values at function return. * `complete' and `compgen' have a new `-o nosort' option, which forces readline to not sort the completion matches. * Bash now allows waiting for the most recent process substitution, since it appears as $!. * The `unset' builtin now unsets a scalar variable if it is subscripted with a `0', analogous to the ${var[0]} expansion. * `set -i' is no longer valid, as in other shells. * BASH_SUBSHELL is now updated for process substitution and group commands in pipelines, and is available with the same value when running any exit trap. * Bash now checks $INSIDE_EMACS as well as $EMACS when deciding whether or not bash is being run in a GNU Emacs shell window. * Bash now treats SIGINT received when running a non-builtin command in a loop the way it has traditionally treated running a builtin command: running any trap handler and breaking out of the loop. * New variable: EXECIGNORE; a colon-separate list of patterns that will cause matching filenames to be ignored when searching for commands. * Aliases whose value ends in a shell metacharacter now expand in a way to allow them to be `pasted' to the next token, which can potentially change the meaning of a command (e.g., turning `&' into `&&'). * `make install' now installs the example loadable builtins and a set of bash headers to use when developing new loadable builtins. * `enable -f' now attempts to call functions named BUILTIN_builtin_load when loading BUILTIN, and BUILTIN_builtin_unload when deleting it. This allows loadable builtins to run initialization and cleanup code. * There is a new BASH_LOADABLES_PATH variable containing a list of directories where the `enable -f' command looks for shared objects containing loadable builtins. * The `complete_fullquote' option to `shopt' changes filename completion to quote all shell metacharacters in filenames and directory names. * The `kill' builtin now has a `-L' option, equivalent to `-l', for compatibility with Linux standalone versions of kill. * BASH_COMPAT and FUNCNEST can be inherited and set from the shell's initial environment. * inherit_errexit: a new `shopt' option that, when set, causes command substitutions to inherit the -e option. By default, those subshells disable -e. It's enabled as part of turning on posix mode. * New prompt string: PS0. Expanded and displayed by interactive shells after reading a complete command but before executing it. * Interactive shells now behave as if SIGTSTP/SIGTTIN/SIGTTOU are set to SIG_DFL when the shell is started, so they are set to SIG_DFL in child processes. * Posix-mode shells now allow double quotes to quote the history expansion character. * OLDPWD can be inherited from the environment if it names a directory. * Shells running as root no longer inherit PS4 from the environment, closing a security hole involving PS4 expansion performing command substitution. * If executing an implicit `cd' when the `autocd' option is set, bash will now invoke a function named `cd' if one exists before executing the `cd' builtin. - Update to readline library 7.0 release candidate 1 * The history truncation code now uses the same error recovery mechansim as the history writing code, and restores the old version of the history file on error. The error recovery mechanism handles symlinked history files. * There is a new bindable variable, `enable-bracketed-paste', which enables support for a terminal's bracketed paste mode. * The editing mode indicators can now be strings and are user-settable (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string' variables). Mode strings can contain invisible character sequences. Setting mode strings to null strings restores the defaults. * Prompt expansion adds the mode string to the last line of a multi-line prompt (one with embedded newlines). * There is a new bindable variable, `colored-completion-prefix', which, if set, causes the common prefix of a set of possible completions to be displayed in color. * There is a new bindable command `vi-yank-pop', a vi-mode version of emacs- mode yank-pop. * The redisplay code underwent several efficiency improvements for multibyte locales. * The insert-char function attempts to batch-insert all pending typeahead that maps to self-insert, as long as it is coming from the terminal. * rl_callback_sigcleanup: a new application function that can clean up and unset any state set by readline's callback mode. Intended to be used after a signal. * If an incremental search string has its last character removed with DEL, the resulting empty search string no longer matches the previous line. * If readline reads a history file that begins with `#' (or the value of the history comment character) and has enabled history timestamps, the history entries are assumed to be delimited by timestamps. This allows multi-line history entries. * Readline now throws an error if it parses a key binding without a terminating `:' or whitespace. - Remove patches which are upstream solved bash-3.2-longjmp.dif bash-4.3-headers.dif readline-6.1-wrap.patch - Rename patches bash-4.3.dif become bash-4.4.dif readline-6.3.dif become readline-7.0.dif - Refresh other patches as well ------------------------------------------------------------------- Mon Oct 19 13:38:58 UTC 2015 - werner@suse.de - Define the USE_MKTEMP and USE_MKSTEMP cpp macros as the implementation is already there. - Add patch bash-4.3-pathtemp.patch to allow root to clear the file systems. Otherwise the completion does not work if /tmp if full (ENOSPC for here documents) ------------------------------------------------------------------- Fri Oct 16 13:02:27 UTC 2015 - werner@suse.de - Remove --hash-size options as there is no any change in the final binary nor library anymore ------------------------------------------------------------------- Mon Aug 31 11:23:11 UTC 2015 - werner@suse.de - Add upstream patch bash43-039 Using the output of `declare -p' when run in a function can result in variables that are invisible to `declare -p'. This problem occurs when an assignment builtin such as `declare' receives a quoted compound array assignment as one of its arguments. - Add upstream patch bash43-040 There is a memory leak that occurs when bash expands an array reference on the rhs of an assignment statement. - Add upstream patch bash43-041 There are several out-of-bounds read errors that occur when completing command lines where assignment statements appear before the command name. The first two appear only when programmable completion is enabled; the last one only happens when listing possible completions. - Add upstream patch bash43-042 There is a problem when parsing command substitutions containing `case' commands within pipelines that causes the parser to not correctly identify the end of the command substitution. ------------------------------------------------------------------- Wed Jul 1 08:31:09 UTC 2015 - coolo@suse.com - add bash-4.3-perl522.patch to fix texi2html for perl 5.22 (defined(@array) has been deprecated since at least 2012) ------------------------------------------------------------------- Thu May 28 08:50:30 UTC 2015 - werner@suse.de - Add upstream patch bash43-034 If neither the -f nor -v options is supplied to unset, and a name argument is found to be a function and unset, subsequent name arguments are not treated as variables before attempting to unset a function by that name. - Add upstream patch bash43-035 A locale with a long name can trigger a buffer overflow and core dump. This applies on systems that do not have locale_charset in libc, are not using GNU libiconv, and are not using the libintl that ships with bash in lib/intl. - Add upstream patch bash43-036 When evaluating and setting integer variables, and the assignment fails to create a variable (for example, when performing an operation on an array variable with an invalid subscript), bash attempts to dereference a null pointer, causing a segmentation violation. - Add upstream patch bash43-037 If an associative array uses `@' or `*' as a subscript, `declare -p' produces output that cannot be reused as input. - Add upstream patch bash43-038 There are a number of instances where `time' is not recognized as a reserved word when the shell grammar says it should be. ------------------------------------------------------------------- Mon May 18 06:10:49 UTC 2015 - meissner@suse.com - move info deletion to %preun sections ------------------------------------------------------------------- Wed Mar 4 22:52:17 CET 2015 - jdelvare@suse.de - bash-4.3-loadables.dif: One more warning fixed, in examples/loadables/logname.c. - bash-4.3-loadables.dif: Reverted one warning fix, which was introducing another warning and possibly a bug. ------------------------------------------------------------------- Wed Mar 4 11:30:12 CET 2015 - jdelvare@suse.de - bash-4.3-loadables.dif: Split changes to shell.h to a separate patch "bash-4.3-include-unistd.dif", as the loadables build just fine without these changes. - bash-4.3-loadables.dif: Drop all header file inclusion fixups, upstream fixed the problem differently 5 years ago. ------------------------------------------------------------------- Wed Feb 18 15:14:47 UTC 2015 - werner@suse.de - Do not restart all signal handlers for bash 4.3 as this breaks trap handler in subshells waotiug for a process ------------------------------------------------------------------- Fri Jan 16 16:53:44 UTC 2015 - werner@suse.de - Remove -DMUST_UNBLOCK_CHLD(=1) as this breaks waitchild(2) on linux ------------------------------------------------------------------- Fri Jan 9 13:11:03 UTC 2015 - werner@suse.de - Add upstream patch bash43-031 The new nameref assignment functionality introduced in bash-4.3 did not perform enough validation on the variable value and would create variables with invalid names. - Add upstream patch bash43-032 When bash is running in Posix mode, it allows signals -- including SIGCHLD -- to interrupt the `wait' builtin, as Posix requires. However, the interrupt causes bash to not run a SIGCHLD trap for all exited children. This patch fixes the issue and restores the documented behavior in Posix mode. - Add upstream patch bash43-033 Bash does not clean up the terminal state in all cases where bash or readline modifies it and bash is subsequently terminated by a fatal signal. This happens when the `read' builtin modifies the terminal settings, both when readline is active and when it is not. It occurs most often when a script installs a trap that exits on a signal without re-sending the signal to itself. ------------------------------------------------------------------- Wed Dec 3 15:05:14 CET 2014 - jdelvare@suse.de - Fix the sed command that fixes up the patch headers. It was printing a duplicate header line, which suprisingly did not confuse patch, but could in the future. - Fix all patches that had the duplicate header line issue. ------------------------------------------------------------------- Tue Nov 4 12:27:30 UTC 2014 - werner@suse.de - Use tail command to follow run-tests instead of a simpe cat command ------------------------------------------------------------------- Fri Oct 24 12:53:04 UTC 2014 - werner@suse.de - Really remove obsolete patches ------------------------------------------------------------------- Fri Oct 24 04:16:32 UTC 2014 - brian@aljex.com - Skip autoconf on OS 10.2 or older ------------------------------------------------------------------- Wed Oct 22 13:44:23 UTC 2014 - werner@suse.de - Avoid fdupes on SLES-10 ------------------------------------------------------------------- Wed Oct 22 12:53:11 UTC 2014 - werner@suse.de - Bump bash version to 4.3 ------------------------------------------------------------------- Tue Oct 21 21:18:20 UTC 2014 - brian@aljex.com - Allow building on targets from SL 10.1 to current since it's free ------------------------------------------------------------------- Mon Oct 6 08:38:54 UTC 2014 - werner@suse.de - Add upstream patches bash43-030 which fixes CVE-2014-6278 bash43-029 which fixes CVE-2014-6277 bash43-028 which fixes CVE-2014-7186/CVE-2014-7187 ------------------------------------------------------------------- Tue Sep 30 11:45:52 UTC 2014 - werner@suse.de - Add patch bash-4.2-extra-import-func.patch which is based on the BSD patch of Christos. As further enhancements the option import-functions is mentioned in the manual page and a shopt switch is added to enable and disable import-functions on the fly - Rename bash-4.2-extra-import-func.patch to bash-4.3-extra-import-func.patch ------------------------------------------------------------------- Mon Sep 29 12:19:29 UTC 2014 - werner@suse.de - Add upstream patches bash43-027 which fixed bsc#898604 bash43-026 which fixes CVE-2014-7169 and bsc#898346 bash43-025 which replaces bash-4.3-CVE-2014-6271.patch and fixes bnc#896776 - Remove patch bash-4.3-CVE-2014-6271.patch due patch bash43-027 - Add patch bash-4.2-CVE-2014-7187.patch for bsc#898603, CVE-2014-7186, CVE-2014-7187: bad handling of HERE documents and for loop issue ------------------------------------------------------------------- Fri Sep 26 08:07:16 UTC 2014 - werner@suse.de - Use a version linker script for libreadline 6.3 as there are new symbols in this 6.3 version like the rl_executing_keyseq and those are used by the new bash 4.3 ------------------------------------------------------------------- Thu Sep 18 12:10:17 UTC 2014 - werner@suse.de - Add bash-4.3-CVE-2014-6271.patch to fix CVE-2014-6271, the unexpected code execution with environment variables (bnc#896776) ------------------------------------------------------------------- Tue Aug 19 13:49:46 UTC 2014 - werner@suse.de - Update to bash 4.3 with patch level 24 * The -t timeout option to `read' does not work when the -e option is used * When PS2 contains a command substitution, here-documents entered in an interactive shell can sometimes cause a segmentation fault. * When the readline `revert-all-at-newline' option is set, pressing newline when the current line is one retrieved from history results in a double free and a segmentation fault. * Using nested pipelines within loops with the `lastpipe' option set can result in a segmentation fault. * Bash does not correctly parse process substitution constructs that contain unbalanced parentheses as part of the contained command. * Indirect variable references do not work correctly if the reference variable expands to an array reference using a subscript other than 0 ------------------------------------------------------------------- Sun Jun 29 13:24:47 UTC 2014 - schwab@linux-m68k.org - Don't use outdated C standard ------------------------------------------------------------------- Tue May 20 16:35:55 UTC 2014 - werner@suse.de - Update to bash 4.3 with patch level 18 *When a SIGCHLD trap runs a command containing a shell builtin while a script is running `wait' to wait for all running children to complete, the SIGCHLD trap will not be run once for each child that terminates. * Using reverse-i-search when horizontal scrolling is enabled doe not redisplay the entire line containing the successful search results. * Under certain circumstances, $@ is expanded incorrectly in contexts where word splitting is not performed. * When completing directory names, the directory name is dequoted twice. This causes problems for directories with single and double quotes in their names. * An extended glob pattern containing a slash (`/') causes the globbing code to misinterpret it as a directory separator. * The code that creates local variables should not clear the `invisible' attribute when returning an existing local variable. Let the code that actually assigns a value clear it. * When assigning an array variable using the compound assignment syntax, but using `declare' with the rhs of the compound assignment quoted, the shell did not mark the variable as visible after successfully performing the assignment. - Update to readline library 6.3 with patch level 6 * Using reverse-i-search when horizontal scrolling is enabled does not redisplay the entire line containing the successful search results. - Remove readline-horizontal-redisplay.patch as now upstream - Rename readline-6.2.dif to readline-6.3.dif and bash-4.2.dif to bash-4.3.dif ------------------------------------------------------------------- Wed Apr 30 11:51:24 UTC 2014 - werner@suse.de - Add readline-horizontal-redisplay.patch from upstream as a temporary fix for failing incremental search in horizontal-scroll-mode ------------------------------------------------------------------- Thu Apr 17 12:56:56 UTC 2014 - werner@suse.de - Make patch command work on older products ------------------------------------------------------------------- Thu Apr 17 11:09:35 UTC 2014 - werner@suse.de - Update to bash 4.3 with patch level 11 * The `helptopic' completion action now maps to all the help topics, not just the shell builtins. * The `help' builtin no longer does prefix substring matching first, so `help read' does not match `readonly', but will do it if exact string matching fails. * The shell can be compiled to not display a message about processes that terminate due to SIGTERM. * Non-interactive shells now react to the setting of checkwinsize and set LINES and COLUMNS after a foreground job exits. * There is a new shell option, `globasciiranges', which, when set to on, forces globbing range comparisons to use character ordering as if they were run in the C locale. * There is a new shell option, `direxpand', which makes filename completion expand variables in directory names in the way bash-4.1 did. * In Posix mode, the `command' builtin does not change whether or not a builtin it shadows is treated as an assignment builtin. * The `return' and `exit' builtins accept negative exit status arguments. * The word completion code checks whether or not a filename containing a shell variable expands to a directory name and appends `/' to the word as appropriate. The same code expands shell variables in command names when performing command completion. * In Posix mode, it is now an error to attempt to define a shell function with the same name as a Posix special builtin. * When compiled for strict Posix conformance, history expansion is disabled by default. * The history expansion character (!) does not cause history expansion when followed by the closing quote in a double-quoted string. * `complete' and its siblings compgen/compopt now takes a new `-o noquote' option to inhibit quoting of the completions. * Setting HISTSIZE to a value less than zero causes the history list to be unlimited (setting it 0 zero disables the history list). * Setting HISTFILESIZE to a value less than zero causes the history file size to be unlimited (setting it to 0 causes the history file to be truncated to zero size). * The `read' builtin now skips NUL bytes in the input. * There is a new `bind -X' option to print all key sequences bound to Unix commands. * When in Posix mode, `read' is interruptible by a trapped signal. After running the trap handler, read returns 128+signal and throws away any partially-read input. * The command completion code skips whitespace and assignment statements before looking for the command name word to be completed. * The build process has a new mechanism for constructing separate help files that better reflects the current set of compilation options. * The -nt and -ot options to test now work with files with nanosecond timestamp resolution. * The shell saves the command history in any shell for which history is enabled and HISTFILE is set, not just interactive shells. * The shell has `nameref' variables and new -n(/+n) options to declare and unset to use them, and a `test -R' option to test for them. * The shell now allows assigning, referencing, and unsetting elements of indexed arrays using negative subscripts (a[-1]=2, echo ${a[-1]}) which count back from the last element of the array. * The {x}<word redirection feature now allows words like {array[ind]} and can use variables with special meanings to the shell (e.g., BASH_XTRACEFD). * There is a new CHILD_MAX special shell variable; its value controls the number of exited child statues the shell remembers. * There is a new configuration option (--enable-direxpand-default) that causes the `direxpand' shell option to be enabled by default. * Bash does not do anything special to ensure that the file descriptor assigned to X in {x}<foo remains open after the block containing it completes. * The `wait' builtin has a new `-n' option to wait for the next child to change status. * The `printf' %(...)T format specifier now uses the current time if no argument is supplied. * There is a new variable, BASH_COMPAT, that controls the current shell compatibility level. * The `popd' builtin now treats additional arguments as errors. * The brace expansion code now treats a failed sequence expansion as a simple string and will continue to expand brace terms in the remainder of the word. * Shells started to run process substitutions now run any trap set on EXIT. * The fc builtin now interprets -0 as the current command line. * Completing directory names containing shell variables now adds a trailing slash if the expanded result is a directory. * `cd' has a new `-@' option to browse a file's extended attributes on systems that support O_XATTR. * The test/[/[[ `-v variable' binary operator now understands array references. - Update to readline library 6.3 with patch level 5 * Readline is now more responsive to SIGHUP and other fatal signals when reading input from the terminal or performing word completion but no longer attempts to run any not-allowable functions from a signal handler context. * There are new bindable commands to search the history for the string of characters between the beginning of the line and the point (history-substring-search-forward, history-substring-search-backward) * Readline allows quoted strings as the values of variables when setting them with `set'. As a side effect, trailing spaces and tabs are ignored when setting a string variable's value. * The history library creates a backup of the history file when writing it and restores the backup on a write error. * New application-settable variable: rl_filename_stat_hook: a function called with a filename before using it in a call to stat(2). Bash uses it to expand shell variables so things like $HOME/Downloads have a slash appended. * New bindable function `print-last-kbd-macro', prints the most-recently- defined keyboard macro in a reusable format. * New user-settable variable `colored-stats', enables use of colored text to denote file types when displaying possible completions (colored analog of visible-stats). * New user-settable variable `keyseq-timout', acts as an inter-character timeout when reading input or incremental search strings. * New application-callable function: rl_clear_history. Clears the history list and frees all readline-associated private data. * New user-settable variable, show-mode-in-prompt, adds a characters to the beginning of the prompt indicating the current editing mode. * New application-settable variable: rl_input_available_hook; function to be called when readline detects there is data available on its input file descriptor. * Readline calls an application-set event hook (rl_event_hook) after it gets a signal while reading input (read returns -1/EINTR but readline does not handle the signal immediately) to allow the application to handle or otherwise note it. * If the user-settable variable `history-size' is set to a value less than 0, the history list size is unlimited. * New application-settable variable: rl_signal_event_hook; function that is called when readline is reading terminal input and read(2) is interrupted by a signal. Currently not called for SIGHUP or SIGTERM. * rl_change_environment: new application-settable variable that controls whether or not Readline modifies the environment (currently readline modifies only LINES and COLUMNS). - Removed patches audit-rl-patch and audit-patch which are now upstream readline-6.2-msgdynamic.patch which is upstream bash-4.2-nsec.dif which is upstream config-guess-sub-update.patch which is upstream - Modify patches bash-4.2-2.4.4.patch becomes bash-4.3-2.4.4.patch bash-3.0-decl.patch becomes bash-4.3-decl.patch bash-4.0-loadables.dif becomes bash-4.3-loadables.dif bash-4.2-sigrestart.patch becomes bash-4.3-sigrestart.patch bash-4.0-headers.dif becomes bash-4.3-headers.dif bash-4.2-winch.dif becomes bash-4.3-winch.dif readline-4.3-input.dif becomes readline-6.3-input.dif readline-6.2-destdir.patch becomes readline-6.3-destdir.patch readline-6.2-rltrace.patch becomes readline-6.3-rltrace.patch ------------------------------------------------------------------- Tue Apr 15 15:25:55 UTC 2014 - werner@suse.de - Add bash upstream patch 47 to fix a problem where the function that shortens pathnames for $PS1 according to the value of $PROMPT_DIRTRIM uses memcpy on potentially-overlapping regions of memory, when it should use memmove. The result is garbled pathnames in prompt strings. - Remove bash-4.2-prompt-dirtrim.patch as this was the original report of above. ------------------------------------------------------------------- Tue Apr 1 12:31:38 UTC 2014 - werner@suse.de - Add bash upstream patch 46 to fix a problem introduced by patch 32 a problem with "$@" and arrays expanding empty positional parameters or array elements when using substring expansion, pattern substitution, or case modfication. The empty parameters or array elements are removed instead of expanding to empty strings (""). - Add readline upstream patch 5: The readline shared library helper script needs to be updated for Mac OS X 10.9 ------------------------------------------------------------------- Tue Mar 18 11:25:21 UTC 2014 - werner@suse.de - CVE-2014-2524: bash,readline: temporary file misuse in _rl_tropen (bnc#868822) Even if used only by developers to debug readline library do not open temporary files from public location without O_EXCL ------------------------------------------------------------------- Fri Jan 31 16:39:08 UTC 2014 - werner@suse.de - Add upstream patch bash-4.2-prompt-dirtrim.patch bash patch tar ball to solve some some cases strange output displayed in the prompt if PROMPT_DIRTRIM i sset. ------------------------------------------------------------------- Fri Jul 12 12:35:26 UTC 2013 - werner@suse.de - Reintroduce patch bash-4.2-winch.dif to solve bnc#828877 accordingly to my test and upstream (search on bug-bash@gnu.org for message-id <51DFEB10.8080302@case.edu>) ------------------------------------------------------------------- Mon Jul 8 11:27:51 UTC 2013 - werner@suse.de - Add bash-4.2-strcpy.patch from upstream mailing list to patch collection tar ball to avoid when using \w in the prompt and changing the directory outside of HOME the a strcpy work on overlapping memory areas. ------------------------------------------------------------------- Tue Jun 4 18:36:43 UTC 2013 - coolo@suse.com - add a conflict between readline5 and readline6-32bit ------------------------------------------------------------------- Tue May 28 15:17:36 UTC 2013 - werner@suse.de - Do not restart the sighandler after a trap is reset (bnc#820149) ------------------------------------------------------------------- Thu Mar 21 11:51:54 UTC 2013 - werner@suse.de - Add patch from upstream mailing list to speed up array handling - Add patch from upstream mailing list to avoid fdleaks - Use lsdiff to determine the depth of the leading slashes in a patch file ------------------------------------------------------------------- Fri Mar 15 15:35:51 UTC 2013 - werner@suse.de - Disable workaround for bnc#382214 due bnc#806628, let's see when the old bug will be up again. - Update bash 4.2 to patch level 45 * When SIGCHLD is trapped, and a SIGCHLD trap handler runs when a pending `read -t' invocation times out and generates SIGALRM, bash can crash with a segmentation fault. * When converting a multibyte string to a wide character string as part of pattern matching, bash does not handle the end of the string correctly, causing the search for the NUL to go beyond the end of the string and reference random memory. Depending on the contents of that memory, bash can produce errors or crash. * The <&n- and >&n- redirections, which move one file descriptor to another, leave the file descriptor closed when applied to builtins or compound commands. - Use screen to provide a controlling terminal for running the test suite ------------------------------------------------------------------- Tue Feb 12 07:58:08 UTC 2013 - schwab@suse.de - config-guess-sub-update.patch: Update config.guess/sub for aarch64 - Fix check for negated warning switch ------------------------------------------------------------------- Wed Jan 9 08:55:09 UTC 2013 - werner@suse.de - Avoid autoconf on older products - Apply audit patch variant to readline as well as we use a shared libreadline - Avoid bash-devel on older products as older GNU make do not have a realpath builtin ------------------------------------------------------------------- Tue Jan 8 17:43:01 UTC 2013 - werner@suse.de - Do not trigger the export of COLUMNS or LINES due enforced checkwinsize (bnc#793536) ------------------------------------------------------------------- Tue Jan 8 14:57:17 UTC 2013 - werner@suse.de - Update bash 4.2 to patch level 42 * Missing I/O errors if output redirection applied to builtin commands when the file descriptor was closed * Process substitution incorrectly inherited a flag that inhibited using the temporary environment for variable lookups if it was providing the filename to a redirection. * Compilation failed after specifying the `minimal config' option ------------------------------------------------------------------- Mon Nov 5 12:41:57 UTC 2012 - werner@suse.de - Update bash 4.2 to patch level 39 * Official fix for the last crash fix * Avoid variable expansion in arithmetic expressions when evaluation is being suppressed ------------------------------------------------------------------- Wed Oct 17 13:10:22 UTC 2012 - werner@suse.de - Do not mix xmalloc/xfree of libreadline and bash by making the libreadline version weak symbols instead of private symbols ------------------------------------------------------------------- Fri Aug 24 14:31:35 UTC 2012 - werner@suse.de - Add patch from upstream mailing list to avoids crash ------------------------------------------------------------------- Fri Jul 20 10:16:20 UTC 2012 - werner@suse.de - Update bash 4.2 to patch level 37 * Attempting to redo (using `.') the vi editing mode `cc', `dd', or `yy' commands leads to an infinite loop. ------------------------------------------------------------------- Thu Jul 19 12:04:50 UTC 2012 - werner@suse.de - Do not mask internal _rl symbols as internal as there are many tools out there which uses them (gdb as an example) ------------------------------------------------------------------- Wed Jul 18 11:17:00 UTC 2012 - werner@suse.de - libreadlib: try to avoid to bind references of the symbols rl_instream and rl_outstream - libreadlib: make private symbols really private ------------------------------------------------------------------- Wed Jul 18 09:20:55 UTC 2012 - werner@suse.de - Increase buffer for libreadline messsages if required - Include stdio.h in libreadline header files to get the declaration of FILES correct. ------------------------------------------------------------------- Mon Jul 9 10:54:51 UTC 2012 - werner@suse.de - Update bash 4.2 to patch level 36 * Patch 25: When used in a shell function, `declare -g -a array=(compound assignment)' creates a local variable instead of a global one. * Patch 26: The `lastpipe' option does not behave correctly on machines where the open file limit is less than 256. * Patch 27: When the `extglob' shell option is enabled, pattern substitution does not work correctly in the presence of multibyte characters. * Patch 28: When using a word expansion for which the right hand side is evaluated, certain expansions of quoted null strings include spurious ^? characters. * Patch 29: Bash-4.2 tries to leave completed directory names as the user typed them, without expanding them to a full pathname. One effect of this is that shell variables used in pathnames being completed (e.g., $HOME) are left unchanged, but the `$' is quoted by readline because it is a special character to the shell. * Patch 30: When attempting to glob strings in a multibyte locale, and those strings contain invalid multibyte characters that cause mbsnrtowcs to return 0, the globbing code loops infinitely. * Patch 31: A change between bash-4.1 and bash-4.2 to prevent the readline input hook from being called too frequently had the side effect of causing delays when reading pasted input on systems such as Mac OS X. This patch fixes those delays while retaining the bash-4.2 behavior. * Patch 32: Bash-4.2 has problems with DEL characters in the expanded value of variables used in the same quoted string as variables that expand to nothing. * Patch 33: Bash uses a static buffer when expanding the /dev/fd prefix for the test and conditional commands, among other uses, when it should use a dynamic buffer to avoid buffer overflow. * Patch 34: In bash-4.2, the history code would inappropriately add a semicolon to multi-line compound array assignments when adding them to the history. * Patch 35: When given a number of lines to read, `mapfile -n lines' reads one too many. * Patch 36: Bash-4.2 produces incorrect word splitting results when expanding double-quoted $@ in the same string as and adjacent to other variable expansions. The $@ should be split, the other expansions should not. - Add patch to avoid double free or corruption due expanding number sequence with huge numbers. Patch will go upstream (bnc#763591) ------------------------------------------------------------------- Tue Jun 26 12:49:53 UTC 2012 - cfarrell@suse.com - license update: GPL-3.0+ Upstream declares the bash license to be GPL-3.0+ - not GPL-2.0+ ------------------------------------------------------------------- Mon Jun 11 11:51:12 UTC 2012 - werner@suse.de - Enable auditing patch by simply applying it ------------------------------------------------------------------- Wed May 23 23:37:53 UTC 2012 - meissner@suse.com - added auditing patch from http://git.savannah.gnu.org/cgit/bash.git/plain/CWRU/audit-patch ------------------------------------------------------------------- Thu Apr 5 11:48:02 UTC 2012 - werner@suse.de - Remove not required patch (was a fix for bnc#141394) which now cause a wrong behaviour if applied (bnc#755453) ------------------------------------------------------------------- Tue Mar 13 09:34:58 UTC 2012 - werner@suse.de - Update bash 4.2 to patch level 24 ------------------------------------------------------------------- Fri Mar 9 17:44:52 UTC 2012 - werner@suse.de - Avoid endless loop in user completion caused by endpw patches ------------------------------------------------------------------- Tue Mar 6 12:15:18 UTC 2012 - werner@suse.de - Add small patch for be able to use nanoseconds in comparision of time stamps of files (bnc#750640) ------------------------------------------------------------------- Tue Mar 6 09:33:30 UTC 2012 - werner@suse.de - Reenable patch for bnc#725657 with latest change from latest git repository of the patch. ------------------------------------------------------------------- Tue Dec 20 20:01:48 UTC 2011 - coolo@suse.com - add autoconf as buildrequire to avoid implicit dependency ------------------------------------------------------------------- Mon Dec 19 14:34:41 UTC 2011 - coolo@suse.de - remove suse_update_config calls - obsolete ------------------------------------------------------------------- Fri Nov 25 17:08:30 UTC 2011 - werner@suse.de - Make build check quiet ------------------------------------------------------------------- Fri Nov 25 16:32:14 UTC 2011 - werner@suse.de - Update bash 4.2 to patch level 20 - Update readline 6.2 to patch level 2 ------------------------------------------------------------------- Mon Nov 21 15:35:05 UTC 2011 - werner@suse.de - Disable endpwent() in rl_username_completion_function() as this cause a deadlock in a futex of the glibc (bnc#731556) ------------------------------------------------------------------- Fri Nov 18 12:03:56 UTC 2011 - werner@suse.de - Enforce bind references to global function symbols to the definition within libreadline ------------------------------------------------------------------- Wed Nov 16 11:11:21 UTC 2011 - werner@suse.de - Use libtinfo if available otherwise libncurses, this avoids linkage against libncursesw of libreadline (required due bnc #729226) ------------------------------------------------------------------- Fri Nov 11 15:27:12 UTC 2011 - werner@suse.de - Avoid memory mapped /var/run/nscd/passwd at shutdown by simply unmapping this only used area if parent is systemd or SysVinit ------------------------------------------------------------------- Fri Nov 11 13:45:40 UTC 2011 - werner@suse.de - Always close get(pw|gr)func with endpw() respectivly with endgr() to avoid memory mapped passwd/groups of cache files from nscd ------------------------------------------------------------------- Wed Nov 2 08:23:24 UTC 2011 - werner@suse.de - Disable last patch as it seems a bit broken (bnc#725657) ------------------------------------------------------------------- Tue Oct 25 17:11:23 UTC 2011 - werner@suse.de - Add direxpand patch from upstream (bnc#725657) ------------------------------------------------------------------- Fri Oct 7 15:01:42 UTC 2011 - werner@suse.de - Add patch from upstream mailing list to avoid memory leak by reassigning associative array variable ------------------------------------------------------------------- Mon Sep 19 14:59:39 UTC 2011 - coolo@suse.com - remove autoreqprov and author lists ------------------------------------------------------------------- Tue Jun 21 18:58:56 CEST 2011 - werner@suse.de - Add fix from upstream mailing list to avoid crash ------------------------------------------------------------------- Fri Jun 17 11:43:00 UTC 2011 - coolo@novell.com - use original source URLs ------------------------------------------------------------------- Thu Jun 16 15:03:04 CEST 2011 - werner@suse.de - Fix the fix for bug bnc#681286 to be able to avoid both a not expanding glob as well as the infinit loop in multi byte locale ------------------------------------------------------------------- Thu May 12 12:04:28 CEST 2011 - werner@suse.de - Update bash 4.2 to patch level 10 - Add patch from upstream to avoid loosing quoted-nulls - Add modified patch to avod endless loop in UTF-8 locale ------------------------------------------------------------------- Tue Mar 22 13:16:43 CET 2011 - werner@suse.de - Remove patch to avod endless loop in UTF-8 locale as it breaks glob expanding (bnc#681286) ------------------------------------------------------------------- Tue Mar 15 18:28:58 CET 2011 - werner@suse.de - Update bash 4.2 to patch level 8 - Add Ctr-C patch from upstream - Add fix for endless loop in UTF-8 locale ------------------------------------------------------------------- Wed Mar 9 12:00:48 CET 2011 - werner@suse.de - Avoid siglongjmp, compare with http://lists.gnu.org/archive/html/bug-bash/2011-03/msg00070.html use temprary solution from Chet ------------------------------------------------------------------- Tue Mar 8 18:47:59 CET 2011 - werner@suse.de - Much better solution for saving history for system with sigsetjmp ------------------------------------------------------------------- Tue Mar 8 12:51:29 CET 2011 - werner@suse.de - Reintroduce history saving at SIGHUP ------------------------------------------------------------------- Tue Mar 7 15:25:33 CET 2011 - werner@suse.de - Update bash 4.2 to patch level 7 ------------------------------------------------------------------- Thu Feb 17 10:08:53 UTC 2011 - coolo@novell.com - having a bash man page is recommended (bnc#672528) ------------------------------------------------------------------- Mon Feb 14 16:50:00 CET 2011 - werner@suse.de - Update to bash 4.2 -- changelog see entry for bash 4.2 rc1 ------------------------------------------------------------------- Mon Jan 17 16:19:59 CET 2011 - werner@suse.de - Update to bash 4.2 rc1 * `exec -a foo' now sets $0 to `foo' in an executable shell script without a leading #!. * Subshells begun to execute command substitutions or run shell functions or builtins in subshells do not reset trap strings until a new trap is specified. This allows $(trap) to display the caller's traps and the trap strings to persist until a new trap is set. * `trap -p' will now show signals ignored at shell startup, though their disposition still cannot be modified. * $'...', echo, and printf understand \uXXXX and \UXXXXXXXX escape sequences. * declare/typeset has a new `-g' option, which creates variables in the global scope even when run in a shell function. * test/[/[[ have a new -v variable unary operator, which returns success if `variable' has been set. * Posix parsing changes to allow `! time command' and multiple consecutive instances of `!' (which toggle) and `time' (which have no cumulative effect). * Posix change to allow `time' as a command by itself to print the elapsed user, system, and real times for the shell and its children. * $((...)) is always parsed as an arithmetic expansion first, instead of as a potential nested command substitution, as Posix requires. * A new FUNCNEST variable to allow the user to control the maximum shell function nesting (recursive execution) level. * The mapfile builtin now supplies a third argument to the callback command: the line about to be assigned to the supplied array index. * The printf builtin has a new %(fmt)T specifier, which allows time values to use strftime-like formatting. * There is a new `compat41' shell option. * The cd builtin has a new Posix-mandated `-e' option. * Negative subscripts to indexed arrays, previously errors, now are treated as offsets from the maximum assigned index + 1. * Negative length specifications in the ${var:offset:length} expansion, previously errors, are now treated as offsets from the end of the variable. * Parsing change to allow `time -p --'. * Posix-mode parsing change to not recognize `time' as a keyword if the following token begins with a `-'. This means no more Posix-mode `time -p'. Posix interpretation 267. * There is a new `lastpipe' shell option that runs the last command of a pipeline in the current shell context. The lastpipe option has no effect if job control is enabled. * History expansion no longer expands the `$!' variable expansion. * Posix mode shells no longer exit if a variable assignment error occurs with an assignment preceding a command that is not a special builtin. * History expansion no longer expands the `$!' variable expansion. * Posix mode shells no longer exit if a variable assignment error occurs with an assignment preceding a command that is not a special builtin. * Non-interactive mode shells exit if -u is enabled and an attempt is made to use an unset variable with the % or # expansions, the `//', `^', or `,' expansions, or the parameter length expansion. * Posix-mode shells use the argument passed to `.' as-is if a $PATH search fails, effectively searching the current directory. Posix-2008 change. - Update to readline 6.2 rc1 * The history library does not try to write the history filename in the current directory if $HOME is unset. This closes a potential security problem if the application does not specify a history filename. * New bindable variable `completion-display-width' to set the number of columns used when displaying completions. * New bindable variable `completion-case-map' to cause case-insensitive completion to treat `-' and `_' as identical. * There are new bindable vi-mode command names to avoid readline's case- insensitive matching not allowing them to be bound separately. * New bindable variable `menu-complete-display-prefix' causes the menu completion code to display the common prefix of the possible completions before cycling through the list, instead of after. ------------------------------------------------------------------- Mon Oct 18 11:09:31 CEST 2010 - jslaby@suse.de - fix czech message ------------------------------------------------------------------- Thu Oct 14 14:34:15 CEST 2010 - werner@suse.de - Update bash 4.1 to patch level 9 * When declaring an associative array and implicitly assigning a value to element "0", bash does not correctly allocate memory, leading to a segmentation violation when that element or the array itself is unset. * An arriving SIGCHLD will interrupt `slow' system calls such as write(2) to or read(2) from a terminal. This results in an error message and truncated input or output. ------------------------------------------------------------------- Fri Sep 3 20:55:30 UTC 2010 - cristian.rodriguez@opensuse.org - builtin "man2html"generates html manual with a timestamp that causes the package to be published over and over again. ------------------------------------------------------------------- Mon Aug 16 15:50:43 CEST 2010 - werner@suse.de - A modified version of the pipe patch which should handle the PIPESTATUS array ------------------------------------------------------------------- Fri Aug 13 14:19:02 CEST 2010 - werner@suse.de - Disable the pipe patch from Thu Jun 24 10:40:09 CEST 2010 as this resets the PIPESTATUS array to the status of the forground process only ------------------------------------------------------------------- Thu Jul 29 17:06:51 CEST 2010 - werner@suse.de - Add fix from mailing list to avoid crash ------------------------------------------------------------------- Mon Jul 19 09:54:50 CEST 2010 - werner@suse.de - Comment out recommendation of bash-completion, as I'd like no to see the bugs of bash-completion in my bugzilla ------------------------------------------------------------------- Sat Jul 17 01:27:17 UTC 2010 - cristian.rodriguez@opensuse.org - Do not package static libraries - Fix Recommends/Suggests ------------------------------------------------------------------- Thu Jun 24 11:34:48 CEST 2010 - werner@suse.de - Add fix from upstream: restore the parser state over changing readline editing mode otherwise e.g. set alias before the change are lost. ------------------------------------------------------------------- Thu Jun 24 10:40:09 CEST 2010 - werner@suse.de - Avoid running the last member of a pipe command sequence to run in its own subshell, this makes know lines like the simple echo 1 2 | read a b; echo $a $b work as expected by the users ------------------------------------------------------------------- Tue May 25 12:35:03 CEST 2010 - werner@suse.de - Update bash 4.1 to patch level 7 * Bash did not correctly print/reproduce here documents attached to commands inside compound commands such as for and while. * A typo caused bash to not honor a precision specification in a printf format. ------------------------------------------------------------------- Mon Apr 12 11:36:30 CEST 2010 - werner@suse.de - Add fix for memory double free in array handling ------------------------------------------------------------------- Tue Apr 6 15:27:24 CEST 2010 - werner@suse.de - Update bash 4.1 to patch level 5 (related to bnc#522351) * If command completion is attempted on a word with a quoted globbing character (e.g., `*' or `?'), bash can reference a NULL pointer and dump core. * When running in Posix mode and executing a shell function without local variables, bash will not propagate a variable in a special builtin's temporary environment to have global scope. * When the `read' builtin times out after the timeout specified with -t is exceeded, it does not reset the flags that tell signal handlers to process signals immediately instead of deferring their handling. This can result in unsafe functions being called from signal handlers, which can cause bash to hang or dump core. ------------------------------------------------------------------- Tue Mar 9 15:34:05 CET 2010 - werner@suse.de - Add patch from bash-bug list to avoid crahs on some strange TAB completions ------------------------------------------------------------------- Tue Mar 2 00:45:53 CET 2010 - ro@suse.de - fix warning no return statement in function returning non-void to fix build (in bashline.c) ------------------------------------------------------------------- Wed Feb 24 09:55:03 CET 2010 - werner@suse.de - Avoid hang due malloc()/free() within signal handler (bnc#522351) ------------------------------------------------------------------- Thu Feb 18 11:05:13 CET 2010 - werner@suse.de - Add patch to reflect the usage of /etc/bash.bashrc (bnc#577221) ------------------------------------------------------------------- Mon Feb 15 17:24:46 CET 2010 - werner@suse.de - Update bash 4.1 to patch level 2 * Here-documents within $(...) command substitutions may once more be delimited by the closing right paren, instead of requiring a newline. * Bash's file status checks (executable, readable, etc.) now take file system ACLs into account on file systems that support them. * Bash now passes environment variables with names that are not valid shell variable names through into the environment passed to child processes. * The `execute-unix-command' readline function now attempts to clear and reuse the current line rather than move to a new one after the command executes. * `printf -v' can now assign values to array indices. * New `complete -E' and `compopt -E' options that work on the "empty" completion: completion attempted on an empty command line. * New complete/compgen/compopt -D option to define a `default' completion: a completion to be invoked on command for which no completion has been defined. If this function returns 124, programmable completion is attempted again, allowing a user to dynamically build a set of completions as completion is attempted by having the default completion function install individual completion functions each time it is invoked. * When displaying associative arrays, subscripts are now quoted. * Changes to dabbrev-expand to make it more `emacs-like': no space appended after matches, completions are not sorted, and most recent history entries are presented first. * The [[ and (( commands are now subject to the setting of `set -e' and the ERR trap. * The source/. builtin now removes NUL bytes from the file before attempting to parse commands. * There is a new configuration option (in config-top.h) that forces bash to forward all history entries to syslog. * A new variable $BASHOPTS to export shell options settable using `shopt' to child processes. * There is a new confgure option that forces the extglob option to be enabled by default. * New variable $BASH_XTRACEFD; when set to an integer bash will write xtrace output to that file descriptor. * If the optional left-hand-side of a redirection is of the form {var}, the shell assigns the file descriptor used to $var or uses $var as the file descriptor to move or close, depending on the redirection operator. * The < and > operators to the [[ conditional command now do string comparison according to the current locale if the compatibility level is greater than 40. * Programmable completion now uses the completion for `b' instead of `a' when completion is attempted on a line like: a $(b c. * Force extglob on temporarily when parsing the pattern argument to the == and != operators to the [[ command, for compatibility. * Changed the behavior of interrupting the wait builtin when a SIGCHLD is received and a trap on SIGCHLD is set to be Posix-mode only. * The read builtin has a new `-N nchars' option, which reads exactly NCHARS characters, ignoring delimiters like newline. * The mapfile/readarray builtin no longer stores the commands it invokes via callbacks in the history list. * There is a new `compat40' shopt option. - Update readline 6.1 to patch level 1 * New bindable function: menu-complete-backward. * In the vi insertion keymap, C-n is now bound to menu-complete by default, and C-p to menu-complete-backward. * When in vi command mode, repeatedly hitting ESC now does nothing, even when ESC introduces a bound key sequence. This is closer to how historical vi behaves. * New bindable function: skip-csi-sequence. Can be used as a default to consume key sequences generated by keys like Home and End without having to bind all keys. * New application-settable function: rl_filename_rewrite_hook. Can be used to rewite or modify filenames read from the file system before they are compared to the word to be completed. * New bindable variable: skip-completed-text, active when completing in the middle of a word. If enabled, it means that characters in the completion that match characters in the remainder of the word are "skipped" rather than inserted into the line. * The pre-readline-6.0 version of menu completion is available as "old-menu-complete" for users who do not like the readline-6.0 version. * New bindable variable: echo-control-characters. If enabled, and the tty ECHOCTL bit is set, controls the echoing of characters corresponding to keyboard-generated signals. * New bindable variable: enable-meta-key. Controls whether or not readline sends the smm/rmm sequences if the terminal indicates it has a meta key that enables eight-bit characters. ------------------------------------------------------------------- Wed Dec 16 10:48:09 CET 2009 - jengelh@medozas.de - package documentation as noarch ------------------------------------------------------------------- Sat Dec 12 18:12:02 CET 2009 - jengelh@medozas.de - add baselibs.conf as a source ------------------------------------------------------------------- Fri Dec 4 10:40:02 CET 2009 - werner@suse.de - Fix bug in bash-4.0-security.patch (bnc#559877) ------------------------------------------------------------------- Thu Oct 29 15:23:20 CET 2009 - werner@suse.de - Update to newest patch level 35 * bash incorrectly interprets wildcarded path components between a **/ and the last / * bash incorrectly treated single and double quotes as delimiters rather than introducing quoted strings when splitting the line into words for programmable completion functions ------------------------------------------------------------------- Wed Sep 30 13:24:57 CEST 2009 - werner@suse.de - Make _rl_enable_meta configurable by the users (bnc#541379) ------------------------------------------------------------------- Wed Sep 9 17:41:15 CEST 2009 - werner@suse.de - Do not change tty owner group twice by child and parent (bnc#523667) ------------------------------------------------------------------- Wed Sep 9 17:32:20 CEST 2009 - werner@suse.de - Update to newest patch level 33 * Includes one of our own patches ------------------------------------------------------------------- Wed Aug 26 13:01:19 CEST 2009 - coolo@novell.com - rediff patches to avoid fuzz ------------------------------------------------------------------- Tue Jul 28 13:19:20 CEST 2009 - werner@suse.de - Update to newest patch level 28 ------------------------------------------------------------------- Thu Jul 2 14:45:19 CEST 2009 - werner@suse.de - Add fix from bash maintainer for closing memory leak in read builtin (bnc#510288) ------------------------------------------------------------------- Tue Jun 9 18:16:25 CEST 2009 - werner@suse.de - Branch off some sub packages: * bash-lang to include localization * bash-loadables for installing the loadable runtime builtins * bash-devel to install headers for developing loadable builtins ------------------------------------------------------------------- Wed Jun 3 12:16:43 CEST 2009 - werner@suse.de - Enforce the usage of euidaccess(3) instead of stat(2) for testing permissions for a file (bnc#509105) ------------------------------------------------------------------- Mon May 25 14:09:03 CEST 2009 - werner@suse.de - Update to newest patch level 24: * include last few patches - Add patches from mailing list for globstar expansion ------------------------------------------------------------------- Mon May 11 10:18:06 CEST 2009 - werne@suse.de - Increase size of hash table for runtime linker a lot ------------------------------------------------------------------- Mon Apr 27 12:18:44 CEST 2009 - werne@suse.de - Add patches from mailing list: * fix problem with invisible characters in prompt * make dir*/** work ------------------------------------------------------------------- Tue Apr 21 12:53:39 CEST 2009 - werne@suse.de - Do not crash on forbidden subdirectories with globstar extension ------------------------------------------------------------------- Wed Apr 15 11:27:56 CEST 2009 - werne@suse.de - Add fix to be able to clear to eol in readline library ------------------------------------------------------------------- Tue Apr 14 12:10:31 CEST 2009 - werne@suse.de - Add fix for timing issue in readline SIGWINCH handling ------------------------------------------------------------------- Wed Apr 8 14:14:10 CEST 2009 - werne@suse.de - Add patches from bug-bash@gnu.org to avoid eg. segmentation fault ------------------------------------------------------------------- Mon Mar 16 11:38:14 CET 2009 - werner@suse.de - Add patches from bug-bash@gnu.org to avoid eg. segmentation fault ------------------------------------------------------------------- Thu Mar 12 15:05:55 CET 2009 - werner@suse.de - Add patch from bug-bash@gnu.org to enable |& not only for builtins and shell functions but for all commands. ------------------------------------------------------------------- Tue Mar 10 14:50:55 CET 2009 - werner@suse.de - Switch to official patches, now we are on patch level 10 ------------------------------------------------------------------- Wed Mar 4 17:36:35 CET 2009 - werner@suse.de - Use patches from bug-bash@gnu.org to make it work ------------------------------------------------------------------- Wed Mar 4 15:05:40 CET 2009 - werner@suse.de - Patch for bnc#481817 does not work in any case ------------------------------------------------------------------- Wed Mar 4 13:10:02 CET 2009 - werner@suse.de - My last patch for bnc#470548 send to bug-bash@gnu.org was not fully applied and this had caused a memory corruption on tab completion. - Enable the parser to find closing parenthesis at the end of an argument of a command even if backslash is used (bnc#481817) - Correct link of shared libraries of devel readline package ------------------------------------------------------------------- Fri Feb 27 17:39:08 CET 2009 - werner@suse.de - Update bash 4.0 to patch level 0 - Update readline 6.0 to patch level 0 ------------------------------------------------------------------- Wed Feb 18 16:42:47 CET 2009 - werner@suse.de - Add readline patch 13 ------------------------------------------------------------------- Fri Jan 30 17:03:36 CET 2009 - werner@suse.de - Restore state if shell function for completion is interrupted (bnc#470548) ------------------------------------------------------------------- Tue Jan 13 12:34:56 CET 2009 - olh@suse.de - obsolete old -XXbit packages (bnc#437293) ------------------------------------------------------------------- Fri Dec 19 15:59:27 CET 2008 - werner@suse.de - Enable large file support (bnc#460560) ------------------------------------------------------------------- Tue Dec 9 19:13:46 CET 2008 - schwab@suse.de - Add bash patches 40-48. ------------------------------------------------------------------- Tue Nov 25 14:41:50 CET 2008 - werner@suse.de - Parse the return value of setlocale(LC_ALL) (bnc#447846) ------------------------------------------------------------------- Thu Oct 16 12:07:20 CEST 2008 - werner@suse.de - Let's avoid not needed library dependencies (bnc#439051) ------------------------------------------------------------------- Mon Sep 1 11:59:26 CEST 2008 - prusnak@suse.cz - bash should suggest command-not-found, not scout ------------------------------------------------------------------- Thu Jul 24 16:41:41 CEST 2008 - werner@suse.de - Add command-not-found.patch for scout support (fate#303730) ------------------------------------------------------------------- Tue Jun 17 11:05:07 CEST 2008 - werner@suse.de - Avoid underline the full paragraph in the man page (bnc#400767) ------------------------------------------------------------------- Sat May 17 19:24:50 CEST 2008 - coolo@suse.de - fix rename of xxbit packages ------------------------------------------------------------------- Tue May 6 18:29:10 CEST 2008 - schwab@suse.de - Add bash patches 34-39. ------------------------------------------------------------------- Mon Apr 28 03:42:11 CEST 2008 - matz@suse.de - Fix last patch. ------------------------------------------------------------------- Thu Apr 24 15:59:20 CEST 2008 - werner@suse.de - Add workaround for bnc#382214 ------------------------------------------------------------------- Thu Apr 10 12:54:45 CEST 2008 - ro@suse.de - added baselibs.conf file to build xxbit packages for multilib support ------------------------------------------------------------------- Wed Apr 2 11:49:20 CEST 2008 - werner@suse.de - Allow to (re)send signals within trap handlers (bnc#345441) - Clear exit status if not sourcing system profile (bnc#372061) ------------------------------------------------------------------- Thu Feb 28 11:49:28 CET 2008 - dmueller@suse.de - remove invalid filerequires, the libreadline5 dependency is enough ------------------------------------------------------------------- Mon Jan 28 16:12:25 CET 2008 - schwab@suse.de - Add bash patches 26-33. ------------------------------------------------------------------- Tue Jan 8 19:23:12 CET 2008 - werner@suse.de - Restart the signal handler for SIGCHLD if not already done within the signal handler its self (may help for bug #345441) ------------------------------------------------------------------- Mon Jan 7 20:43:39 CET 2008 - schwab@suse.de - Fix memory leak in read builtin. ------------------------------------------------------------------- Fri Dec 7 10:16:43 CET 2007 - werner@suse.de - Add skel files .bashrc, bash_history, and .profile from aaa_skel ------------------------------------------------------------------- Tue Dec 4 16:44:05 CET 2007 - werner@suse.de - Extend fix for off-by-one error in libreadline (bug #274120) - Enable ssh detection in the bash (bug #345570) ------------------------------------------------------------------- Thu Sep 20 15:10:06 CEST 2007 - werner@suse.de - Remove error triggering path requirement (bug #326751) ------------------------------------------------------------------- Mon Aug 27 01:30:00 CEST 2007 - schwab@suse.de - Add bash patches 18-25. ------------------------------------------------------------------- Sat Aug 11 14:25:14 CEST 2007 - schwab@suse.de - Add bash patches 10-17. ------------------------------------------------------------------- Sat Aug 4 01:48:42 CEST 2007 - dmueller@suse.de - fix devel requires ------------------------------------------------------------------- Fri Aug 3 18:15:46 CEST 2007 - schwab@suse.de - Fix dependencies. ------------------------------------------------------------------- Tue Jul 31 17:32:55 CEST 2007 - werner@suse.de - Branch off bash-doc and readline-doc (bug #260209) - Rename readline to libreadline5 (bug #260209) ------------------------------------------------------------------- Thu Apr 19 13:33:30 CEST 2007 - schwab@suse.de - Fix bug in readline redisplay. ------------------------------------------------------------------- Thu Mar 29 13:25:57 CEST 2007 - dmueller@suse.de - add ncurses-devel requires to readline-devel ------------------------------------------------------------------- Mon Mar 26 15:43:53 CEST 2007 - rguenther@suse.de - Add bison and ncurses-devel BuildRequires. ------------------------------------------------------------------- Tue Mar 6 23:27:48 CET 2007 - rguenther@suse.de - Fix order of changelog entries. Remove duplicate entry. ------------------------------------------------------------------- Wed Feb 28 13:25:29 CET 2007 - werner@suse.de - Don't access buffer but resulting pointer for array element names to avoid the not initialized area of the buffer. This also fixes an inherent wrong calculation of the string length of the array element names (bug #248717) ------------------------------------------------------------------- Thu Dec 14 13:10:30 CET 2006 - werner@suse.de - Update to bash 3.2 patch level 9 ------------------------------------------------------------------- Wed Dec 6 21:10:45 CET 2006 - schwab@suse.de - Remove obsolete patches. ------------------------------------------------------------------- Fri Nov 17 15:05:12 CET 2006 - werner@suse.de - Remove /usr/bin/bash (#206000) ------------------------------------------------------------------- Tue Nov 14 11:50:32 CET 2006 - werner@suse.de - Update to bash 3.2 patch level 5 ------------------------------------------------------------------- Wed Sep 27 18:08:11 CEST 2006 - werner@suse.de - Use PIE to make a shared bash binary - Make the bash modules build for testing ------------------------------------------------------------------- Fri Sep 22 17:25:15 CEST 2006 - werner@suse.de - Remove rpath option for libraries use linker defaults instead ------------------------------------------------------------------- Fri Sep 22 15:01:46 CEST 2006 - werner@suse.de - Add symbolic link for POSIX bourne shell to /usr/bin/ (#206000) ------------------------------------------------------------------- Thu Sep 14 18:14:50 CEST 2006 - werner@suse.de - Add environment variable DEFAULT_BELL_STYLE to control the bell style of the readline library without using intputrc. ------------------------------------------------------------------- Mon Aug 7 12:45:55 CEST 2006 - werner@suse.de - Let readline-devel requires libncurses.so (bug #188673) ------------------------------------------------------------------- Thu Jul 27 17:13:16 CEST 2006 - werner@suse.de - Let printf builtin handle stdout errors correctly (bug #190349) ------------------------------------------------------------------- Wed May 31 19:11:15 CEST 2006 - werner@suse.de - Fix crash in IFS multi byte handling (bug #180317) ------------------------------------------------------------------- Tue May 23 14:16:14 CEST 2006 - werner@suse.de - Make the test suite run even on ppc emulated on ppc64 ------------------------------------------------------------------- Mon May 15 17:16:37 CEST 2006 - werner@suse.de - Update bash 3.1 to patch level 17 * Allow array subscripts to be sourounded by double quotes - Run test suite with nearly all scripts ------------------------------------------------------------------- Mon Apr 3 12:40:23 CEST 2006 - werner@suse.de - Update bash 3.1 to patch level 16 * Bash will dump core when attempting to perform globbing in directories with very large numbers of files * Solve problem with the extended globbing code prevented dots from matching filenames when used in some matching patterns ------------------------------------------------------------------- Mon Mar 27 15:08:18 CEST 2006 - werner@suse.de - Use access(2) with temporary switched euid/ruid and egid/rgid instead of stat(2) to determine the access permissions of a file, this works even on RO mounted NFS file systems (#160513) ------------------------------------------------------------------- Wed Mar 22 16:09:24 CET 2006 - werner@suse.de - Be sure that ~/.inputrc is read even if INPUTRC is set to system wide /etc/inputrc (bug #160003) - Make prefix-meta work even with new readline syntax but disable it by default (since bug #suse21096) ------------------------------------------------------------------- Mon Mar 20 15:43:02 CET 2006 - werner@suse.de - Update to bash 3.1 to patch level 14 and readline 5.1 to level 4 * Do not terminate words prematurely if parentheses are involved * Readline sometimes reference freed memory * Fix double displayed prompt when using non-incremental searches ------------------------------------------------------------------- Sun Mar 12 17:16:32 CET 2006 - schwab@suse.de - Update bash31-010 patch, better fix for #151000. ------------------------------------------------------------------- Thu Mar 2 11:25:10 CET 2006 - werner@suse.de - Update bash 3.1 to patch level 11 and readline 5.1 to level 2 * Includes fix for line-wrapping errors * Replacement for bug fix of bug #146075 with better reallocation and compaction of the job array list. * Do not let SIGINT from terminal reach background processes * Do not let asynchronous background jobs set the terminal process group incorrectly. * Replacement for bug fix of bug #151000 * Do not strip quoting inside double-quoted command substitutions ------------------------------------------------------------------- Wed Mar 1 17:02:20 CET 2006 - werner@suse.de - Re-enable escaping newline within quotes in commands (#151000) ------------------------------------------------------------------- Mon Jan 30 13:28:36 CET 2006 - werner@suse.de - Do initialize the fresh members of the job array (bug #146075) ------------------------------------------------------------------- Mon Jan 30 12:00:27 CET 2006 - schwab@suse.de - Barf if /proc is missing. ------------------------------------------------------------------- Wed Jan 25 21:29:58 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Tue Jan 10 12:05:33 CET 2006 - werner@suse.de - Update to newest patch level 5: + corrects several omissions in the bash documentation + local array variable declared at function scope shadowing a global variable should create a separate instance + When tilde expansion fails, do not skip rest of an expansion - Expand dollar quotes even for the single quote case (bug #141394) ------------------------------------------------------------------- Thu Dec 22 18:01:11 CET 2005 - werner@suse.de - Switch to first patchlevel for the bash and the readline library. This should fix problems happen with local/eval/let builtins. ------------------------------------------------------------------- Mon Dec 19 13:36:46 CET 2005 - werner@suse.de - Remove dangling sym links ------------------------------------------------------------------- Tue Dec 13 15:19:43 CET 2005 - schwab@suse.de - Fix segfault in readline callback interface. ------------------------------------------------------------------- Mon Dec 12 16:03:34 CET 2005 - schwab@suse.de - Fix return of random data. - Set CFLAGS_FOR_BUILD. ------------------------------------------------------------------- Fri Dec 9 18:15:44 CET 2005 - werner@suse.de - Update to bash version 3.1 and readline library version 5.1 ------------------------------------------------------------------- Thu Sep 29 17:41:12 CEST 2005 - werner@suse.de - More cookie for the compiler ------------------------------------------------------------------- Mon Sep 19 15:16:12 CEST 2005 - werner@suse.de - Give the compiler its cookie ------------------------------------------------------------------- Tue Apr 19 17:22:17 CEST 2005 - postadal@suse.cz - fixed crashing on read -e command and line wrapping (in readline code) (bug #76709) ------------------------------------------------------------------- Fri Jan 28 13:34:10 CET 2005 - werner@suse.de - Add workaround for NFS bug which does not check permissions on open of a file but close (bug #20244) ------------------------------------------------------------------- Thu Nov 25 15:29:10 CET 2004 - werner@suse.de - Remove local array patch because not needed anymore - Fix a crash on internal arrays if unset during execution of functions and files (bug #48511) ------------------------------------------------------------------- Sun Nov 21 03:37:08 CET 2004 - schwab@suse.de - Add patches from <ftp://ftp.cwru.edu/pub/bash/bash-3.0-patches/> and <ftp://ftp.cwru.edu/pub/bash/readline-5.0-patches/>. ------------------------------------------------------------------- Fri Nov 19 16:31:21 CET 2004 - werner@suse.de - Fix the evalexp fix (bug #48253) ------------------------------------------------------------------- Mon Oct 25 17:31:46 CEST 2004 - werner@suse.de - Be sure that the FN macro nroff macro is available in all sub manual pages (bug #47560) ------------------------------------------------------------------- Tue Oct 12 15:33:11 CEST 2004 - werner@suse.de - Re-activate first part of prompt fix because it does not harm (bug #36919) ------------------------------------------------------------------- Tue Oct 12 12:35:47 CEST 2004 - ro@suse.de - no macros in Version lines ------------------------------------------------------------------- Mon Oct 11 15:56:32 CEST 2004 - werner@suse.de - Disable prompt patch for now because not needed and other problmes caused by this fix (bug #36919) - Clear out last_made_pid on success (bug #42232) ------------------------------------------------------------------- Thu Sep 30 14:33:55 CEST 2004 - werner@suse.de - Clear out prompt line of isearch for invisible chars (bug #36919) ------------------------------------------------------------------- Wed Sep 29 18:23:21 CEST 2004 - werner@suse.de - Fix prompt problem with invisible characters (bug #36919) ------------------------------------------------------------------- Fri Sep 17 16:10:23 CEST 2004 - werner@suse.de - Fix line wraping for newlines in prompt (bug #45519) ------------------------------------------------------------------- Thu Sep 16 00:05:25 CEST 2004 - schwab@suse.de - Fix missing return value. ------------------------------------------------------------------- Sat Sep 11 16:30:03 CEST 2004 - kukuk@suse.de - Disable use of WCONTINUED as long as bash does not check if it is supported. ------------------------------------------------------------------- Mon Sep 6 18:07:54 CEST 2004 - werner@suse.de - Fix prefix strip for last added patch ------------------------------------------------------------------- Fri Sep 3 13:03:21 CEST 2004 - werner@suse.de - Add warning about broken glibc locale before we get the SIGSEGV (bug #44658) ------------------------------------------------------------------- Sun Aug 1 11:18:30 CEST 2004 - schwab@suse.de - Fix rl_maybe_save_line. - Track LC_TIME. ------------------------------------------------------------------- Fri Jul 30 17:52:53 CEST 2004 - werner@suse.de - Put version to bash 3.0 and readline 5.0 ------------------------------------------------------------------- Mon Jun 7 13:00:15 CEST 2004 - werner@suse.de - Add missed declaration of oldval for previous bugfix ------------------------------------------------------------------- Fri Jun 4 19:53:47 CEST 2004 - werner@suse.de - Fix local array variable handling (bug #41649) ------------------------------------------------------------------- Wed Jun 2 14:54:21 CEST 2004 - werner@suse.de - Fix evaluation none local return stack curruption (bug #41488) ------------------------------------------------------------------- Wed Apr 7 17:55:59 CEST 2004 - werner@suse.de - In case of quotes position counter has to be advanced (#38599) ------------------------------------------------------------------- Thu Apr 1 12:06:33 CEST 2004 - werner@suse.de - Add directoy check to distinguish none unique and unique executables (bug #37329) ------------------------------------------------------------------- Mon Mar 29 14:22:25 CEST 2004 - werner@suse.de - Make the directory patch working as it should (bug #37329) ------------------------------------------------------------------- Thu Mar 25 17:48:09 CET 2004 - werner@suse.de - Move forward to official bug fixes to catch UTF-8 bug #31451 and bug #36919 ------------------------------------------------------------------- Thu Feb 12 11:29:19 CET 2004 - werner@suse.de - Fix cut&paste error of fix for bug #34427 ------------------------------------------------------------------- Wed Feb 11 18:08:24 CET 2004 - werner@suse.de - Fix SIGSEGV in using UTF-8 and pattern matching (bug #34427) - Fix LC_NUMERIC handling of builtin printf (bug #34428) ------------------------------------------------------------------- Mon Feb 2 12:42:14 CET 2004 - werner@suse.de - Fix the fix and also bug #34242 ------------------------------------------------------------------- Thu Jan 29 16:21:23 CET 2004 - werner@suse.de - Fix performance problem for pattern matching in UTF-8 locale (port back patch from Mitsuru Chinen <mchinen@yamato.ibm.com>) ------------------------------------------------------------------- Tue Jan 13 08:41:39 CET 2004 - kukuk@suse.de - Fix last changes ------------------------------------------------------------------- Sat Jan 10 17:23:23 CET 2004 - adrian@suse.de - add %run_ldconfig ------------------------------------------------------------------- Mon Jul 28 18:24:44 CEST 2003 - werner@suse.de - Add /etc/bash_completion.d directory ------------------------------------------------------------------- Thu Jun 26 09:54:53 CEST 2003 - kukuk@suse.de - Fix specfile for lib64 ------------------------------------------------------------------- Wed Jun 4 18:17:51 CEST 2003 - jh@suse.de - Enable profile feedback ------------------------------------------------------------------- Fri May 23 13:43:27 CEST 2003 - ro@suse.de - remove unpackaged files ------------------------------------------------------------------- Thu May 22 17:51:07 CEST 2003 - mfabian@suse.de - improvement for bash-2.05b-locale.patch and bash-2.05b-readline-init.patch: this fixes the problem that the line editor in bash is not correctly initialized in the first bash after login via ssh or on the linux console. This is especially obvious in UTF-8 locales when editing non-ASCII characters on the command line. See also: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=74701 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=74925 The following bug remains fixed: http://bugzilla.suse.de/show_bug.cgi?id=16999 - bash-2.05b-complete.patch: (by Miloslav Trmac <mitr@volny.cz>) achieve correct alignment of file names containing non-ASCII characters when typing "ls " and pressing Tab twice to show the completions. See also: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=90201 ------------------------------------------------------------------- Mon Mar 17 19:20:44 CET 2003 - werner@suse.de - Do not execute command line if tty is closed (bug #25445) ------------------------------------------------------------------- Thu Feb 13 11:38:41 CET 2003 - schwab@suse.de - Fix prompt decoding with -noediting. ------------------------------------------------------------------- Tue Feb 11 13:34:12 CET 2003 - kukuk@suse.de - To avoid loop in PreRequires, don't install info pages. The info package contains a dir file which contains the bash entries already. ------------------------------------------------------------------- Fri Feb 7 14:20:18 CET 2003 - ro@suse.de - fixed specfile ------------------------------------------------------------------- Fri Feb 7 01:14:57 CET 2003 - ro@suse.de - added install_info macros ------------------------------------------------------------------- Mon Jan 27 21:38:30 CET 2003 - schwab@suse.de - Fix bugs #21096 and #21392 properly: don't recurse on do-lowercase-version for fallback entry. ------------------------------------------------------------------- Tue Jan 21 17:04:24 CET 2003 - werner@suse.de - Allow rbash as login shell (`-' problem, bug #22917) ------------------------------------------------------------------- Wed Dec 18 11:13:20 CET 2002 - schwab@suse.de - Use BuildRoot. ------------------------------------------------------------------- Thu Dec 12 15:16:51 CET 2002 - mfabian@suse.de - add bash-2.05b-display-mbspeed.patch received from Jiro SEKIBA <jir@yamato.ibm.com> to improve display speed in multibyte locales. ------------------------------------------------------------------- Sat Nov 9 16:22:15 CET 2002 - ro@suse.de - add bison to neededforbuild for now (till we're sure about bison again) ------------------------------------------------------------------- Thu Oct 31 12:05:34 CET 2002 - werner@suse.de - For bug #21096 and #21392: implement an oom protection. ------------------------------------------------------------------- Mon Oct 21 14:58:42 CEST 2002 - werner@suse.de - More for bug#21096: Make prefix-meta work even if mapped onto longer escape sequences. ------------------------------------------------------------------- Fri Oct 18 19:55:54 CEST 2002 - werner@suse.de - Fix bug#21096: sequences like `ESC ... CHARACTER' with CHARACTER mapped on functions will not cause an endless recursion anymore. ------------------------------------------------------------------- Wed Sep 25 18:31:19 CEST 2002 - ro@suse.de - removed more bogus provides ------------------------------------------------------------------- Wed Sep 11 12:16:44 CEST 2002 - werner@suse.de - Correct Provides (package should not provides its self) ------------------------------------------------------------------- Fri Aug 30 16:15:57 CEST 2002 - werner@suse.de - Add version dependend require on readline (bug #18652) ------------------------------------------------------------------- Fri Aug 30 15:02:29 CEST 2002 - werner@suse.de - Fix annoying display bug in wide character support (bug #18449) ------------------------------------------------------------------- Wed Aug 28 15:06:48 CEST 2002 - werner@suse.de - Add comment about multi byte handling and echo builtin (#18449) ------------------------------------------------------------------- Wed Aug 21 12:49:45 MEST 2002 - mls@suse.de - fix $RANDOM randomness in subshells ------------------------------------------------------------------- Fri Aug 9 10:36:33 CEST 2002 - kukuk@suse.de - readline-devel should require readline ------------------------------------------------------------------- Mon Jul 29 15:39:39 CEST 2002 - werner@suse.de - Expansion of `~user/<dir>' is like `/<dir>' ------------------------------------------------------------------- Sat Jul 27 22:19:33 CEST 2002 - kukuk@suse.de - Remove not used tetex from neededforbuild - Fix building of man2html (bash.html still broken) ------------------------------------------------------------------- Fri Jul 19 17:03:47 CEST 2002 - werner@suse.de - Check value of LANG before LC_ALL will be unset for getting the _current_ default value of LC_ALL with setlocale(3) (bug #16999) ------------------------------------------------------------------- Fri Jul 19 16:09:12 CEST 2002 - werner@suse.de - Fix NULL pointer handled by memset (readline:mbutil.c) ------------------------------------------------------------------- Thu Jul 18 17:04:27 CEST 2002 - werner@suse.de - Update to new version bash 2.05b/readline 4.3 ------------------------------------------------------------------- Wed May 22 09:16:14 CEST 2002 - schwab@suse.de - Fix vi-change-char. - Fix missing declaration. ------------------------------------------------------------------- Wed Apr 17 16:33:01 CEST 2002 - schwab@suse.de - Fix last change. ------------------------------------------------------------------- Thu Apr 11 11:55:02 CEST 2002 - sf@suse.de - using %{_libdir} to put the shlibs into the correct directories (lib / lib64) ------------------------------------------------------------------- Tue Mar 26 15:27:45 CET 2002 - werner@suse.de - Fix possible endless loop if terminal will be disconneted during complete answer (bug report from bastian@kde.org, for more see http://bugs.kde.org/db/37/37999.html) ------------------------------------------------------------------- Wed Mar 20 00:47:48 CET 2002 - ro@suse.de - removed tetex from neededforbuild, it's not used here ------------------------------------------------------------------- Wed Mar 6 13:36:58 CET 2002 - werner@suse.de - Use improved bug fix for line wrapping problem, now line wrapping work for char and wide char environments - Fix readline version number ------------------------------------------------------------------- Wed Feb 27 14:30:37 CET 2002 - mfabian@suse.de - add readline-4.2-i18n-0.3-display.patch from Jiro SEKIBA <jir@yamato.ibm.com> to fix a line wrapping problem. ------------------------------------------------------------------- Mon Jan 21 13:49:50 CET 2002 - werner@suse.de - Fix bug #12834: Update to bash-2.05-i18n-0.5.patch.gz and bash-2.05-readline-i18n-0.3.patch.gz ------------------------------------------------------------------- Thu Oct 18 14:49:18 CEST 2001 - werner@suse.de - Allways include /etc/inputrc if INPUTRC isn't system file ------------------------------------------------------------------- Mon Oct 8 14:26:26 CEST 2001 - werner@suse.de - Fix readline i18n patch: enable configure of multi byte handling, fix warnings and bug in histexpand.c ------------------------------------------------------------------- Fri Oct 5 13:15:29 CEST 2001 - werner@suse.de - Add two patches for I18N support of bash and readline library ------------------------------------------------------------------- Tue Sep 4 11:36:33 CEST 2001 - werner@suse.de - Add patch to avoid trouble with C++ header definitions ------------------------------------------------------------------- Fri Aug 3 14:34:19 CEST 2001 - werner@suse.de - Fix fc crash (bug #9620) ------------------------------------------------------------------- Mon Jul 2 12:12:26 CEST 2001 - olh@suse.de - dont apply bash-2.05-s390x-unwind.patch on ppc and sparc ------------------------------------------------------------------- Thu Jun 14 01:30:56 CEST 2001 - bk@suse.de - fix 64-bit bigendian bug for s390x ------------------------------------------------------------------- Wed Jun 6 13:36:46 CEST 2001 - werner@suse.de - Re-order configure.in to avoid trouble with new autoconf ------------------------------------------------------------------- Tue May 8 20:03:27 CEST 2001 - mfabian@suse.de - bzip2 sources ------------------------------------------------------------------- Sat May 5 20:09:56 CEST 2001 - schwab@suse.de - Fix process substitution when stdin is closed. ------------------------------------------------------------------- Wed May 2 19:28:19 CEST 2001 - werner@suse.de - Make patch for 2.4.4 work within spec ------------------------------------------------------------------- Wed May 2 18:23:12 CEST 2001 - werner@suse.de - Remove buggy patch in job control, add a workaround ------------------------------------------------------------------- Mon Apr 30 13:03:32 CEST 2001 - werner@suse.de - Add patch to get job control into right order on a pipe ------------------------------------------------------------------- Thu Apr 12 13:09:25 CEST 2001 - werner@suse.de - Provide cpp macro OLD_READLINE for backwards compatibility at compile time with old readline interface ------------------------------------------------------------------- Thu Apr 12 00:45:22 CEST 2001 - ro@suse.de - added split-alias as provides (again) ------------------------------------------------------------------- Wed Apr 11 20:05:33 CEST 2001 - werner@suse.de - Update to bash 2.05 and readline 4.2 - Port of our patches ------------------------------------------------------------------- Thu Feb 22 16:47:10 CET 2001 - werner@suse.de - Split package into bash/readline/readline-devel - Depend libreadline on libncurses ------------------------------------------------------------------- Thu Sep 14 19:36:33 CEST 2000 - werner@suse.de - Add some bug fixes - Add missed ssh fix for none interactive shell ------------------------------------------------------------------- Wed Jun 7 16:14:10 CEST 2000 - werner@suse.de - Fix some patches - Add export patch for bash 2.04 - Fix `soname' of readline and history libraries - Fix linkage of major readline and history libraries ------------------------------------------------------------------- Mon Jun 5 17:21:42 CEST 2000 - schwab@suse.de - Fix unwind_protect_pointer on 64-bit systems. ------------------------------------------------------------------- Wed May 31 20:27:10 CEST 2000 - schwab@suse.de - Comment out declaration of savestring in <readline.h> that conflicts with other people's declaration (eg. gdb). ------------------------------------------------------------------- Mon May 29 16:36:08 CEST 2000 - aj@suse.de - Upgrade to bash 2.04 and readline 4.1. ------------------------------------------------------------------- Sun May 21 13:27:08 CEST 2000 - kukuk@suse.de - Use docdir ------------------------------------------------------------------- Sat Apr 1 20:47:46 GMT 2000 - bk@suse.de - remove obviosly unneeded link /usr/lib/libreadline.so on s390 ------------------------------------------------------------------- Tue Mar 14 15:38:40 CET 2000 - werner@suse.de - Add locale patch to enable LC_NUMERIC handling ------------------------------------------------------------------- Thu Feb 24 15:59:44 CET 2000 - werner@suse.de - Use $VENDOR for several linux architectures - Set check_window_size (shopt checkwinsize) to true, this will correct screen size even if it changes during a job. ------------------------------------------------------------------- Tue Feb 15 14:02:34 CET 2000 - schwab@suse.de - Update config.{guess,sub} to latest version. - Fix spec file to create doc directory before installing into it. ------------------------------------------------------------------- Fri Jan 28 23:43:17 CET 2000 - werner@suse.de - Add mailstat patch (handles mail directories) - Fix configuration (system is %arch-suse-linux) - Fix segfault (job handling) - Fix manual (add rbash manual, add some missed options) - Install rbash (symlink to bash) - Fix readline (End, Del) - Fix temporary file handling (do not write without check) - Use system random interface not builtin - Remove some compiler warnings - Set --enable-disabled-builtins (useful) - Install shared readline and history in /lib (bash needs that) - Enable shared readline (version 4.0) and history library - Try to use shared readline and history for bash (TEST) ------------------------------------------------------------------- Fri Dec 3 17:29:40 CET 1999 - kasal@suse.de - added command to make and install doc/bashref.html ------------------------------------------------------------------- Fri Nov 26 20:52:19 MET 1999 - kukuk@suse.de - Fix spec file ------------------------------------------------------------------- Thu Nov 25 16:28:05 MET 1999 - kukuk@suse.de - Merge Makefile.Linux with spec file, use RPM_OPT_FLAGS - Remove --disable-dparen-arithmetic ------------------------------------------------------------------- Mon Sep 13 17:23:57 CEST 1999 - bs@suse.de - ran old prepare_spec on spec file to switch to new prepare_spec. ------------------------------------------------------------------- Tue Aug 24 12:34:43 MEST 1999 - uli@suse.de - fixed for PPC ------------------------------------------------------------------- Mon Jul 19 09:27:00 MEST 1999 - florian@suse.de - update to bash 2.03, readline 4.0 ------------------------------------------------------------------- Wed Jan 13 15:42:09 MET 1999 - @suse.de - disabled `Broken pipe' messages ------------------------------------------------------------------- Sun Dec 13 22:34:55 MET 1998 - bs@suse.de - removed notify message - bash 2.0 is standard for a long time now. ------------------------------------------------------------------- Mon Dec 7 15:51:52 MET 1998 - florian@suse.de - remove SSH_CLIENT-kludge as this cannot detect all correct cases where .bashrc should be loaded - delete email-changes in bashbug script - update readline to version 2.2.1 ------------------------------------------------------------------- Thu Nov 12 13:50:00 MET 1998 - bs@suse.de - minor fix for new rpm ------------------------------------------------------------------- Thu Oct 1 10:30:05 MEST 1998 - ro@suse.de - update to 2.02.1 / reintegrated werner's tmp-fix for bashbug ------------------------------------------------------------------- Thu Jul 23 14:03:44 MET DST 1998 - werner@suse.de - use mktemp ------------------------------------------------------------------- Thu Jul 16 20:39:05 MEST 1998 - werner@suse.de - fix bashbug temp file handling ------------------------------------------------------------------- Wed Jun 17 17:21:39 MEST 1998 - ro@suse.de - changed general.h: !defined (gid_t) ------------------------------------------------------------------- Mon Oct 27 12:55:07 MET 1997 - florian@suse.de - do not include old compatible-only safestring() in libreadline.a ------------------------------------------------------------------- Thu Oct 9 19:08:47 MEST 1997 - florian@suse.de - update to version 2.01.1 - add several bugfixes - fix missing things in spec-file ------------------------------------------------------------------- Thu Aug 14 15:53:29 MEST 1997 - florian@suse.de - add several bug-fixes from gnu.bash.bug and fix memory management of LC_ALL ------------------------------------------------------------------- Sat Jul 5 10:08:27 MEST 1997 - florian@suse.de - add another bugfix from gnu.utils.bugs ------------------------------------------------------------------- Mon Jun 23 23:04:57 MEST 1997 - florian@suse.de - create the history file with 0600 perms - add minor bugfix to check for new email ------------------------------------------------------------------- Thu Jun 5 11:08:05 MEST 1997 - florian@suse.de - bash: check for NULL-pointer before calling "savestring()" - add bashref.info and newer FAQ ------------------------------------------------------------------- Tue Apr 22 15:16:57 CEST 1997 - bs@suse.de - added FAQ and bashref.html to /usr/doc/packages/bash ------------------------------------------------------------------- Sun Apr 13 23:04:29 MEST 1997 - florian@suse.de - update to bash 2.0 with lots of patches from gnu.utils.bugs Mon Sep 2 02:48:35 MET DST 1996 new version with security patches ------------------------------------------------------------------- Fri Aug 23 16:13:49 MET DST 1996 - florian@suse.de security fix included (0xff was command separator) This document details the changes between this version, bash-4.1-rc, and the previous version, bash-4.1-beta.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
