- Add upstream patch to mark more strings as translatable which is
required by firewall UI when creating rich rules (bsc#1096542)
- Add upstream patch to fix rich rules that uses ipset (bsc#1104990)
* 00002-firewalld-0.6.x-rich-rule-with-ipset-regression.patch
- Update to 0.6.2. Some of the changes are:
* update translations
* nftables: fix log-denied with values other than "all" or "off"
* fw_ipset: raise FirewallError if backend command fails
* ipset: only use "-exist" on restore
* fw_ipset: fix duplicate add of ipset entries
* *tables: For opened ports/protocols/etc match ct state new,untracked (bsc#1105821)
* ipXtables: increase wait lock to 10s
* nftables: fix rich rules ports/protocols/source ports not considering ct state
* ports: allow querying a single added by range
* fw_zone: do not change rich rule errors into warnings
* fw_zone: fix services with multiple destination IP versions (bsc#1105899)
* fw_zone: consider destination for protocols
* firewall/core/fw_nm: nm_get_zone_of_connection should return None or empty string instead of False (boo#1106319)
* fw: If direct rules fail to apply add a "Direct" label to error msg
* fw: if startup fails on reload, reapply non-perm config that survives reload
* nftables: fix rich rule audit log
* ebtables: replace RETURN policy with explicit RETURN at end of chain
* direct backends: allow build_chain() to build multiple rules
* fw: if failure occurs during startup set state to FAILED
* fw: on restart set policy from same function
* ebtables: drop support for broute table
- Remove upstream patches
* 0001-nftables-fix-rich-rules-ports-protocols-source-ports.patch
* 0001-fw_zone-consider-destination-for-protocols.patch
* 0002-fw_zone-fix-services-with-multiple-destination-IP-ve.patch
* firewalld-fix-firewalld-config-crash.patch
- Add upstream patch to fix Neighbor Discovery filtering for IPv6 (bsc#1105821)
* 0001-nftables-fix-rich-rules-ports-protocols-source-ports.patch
- Add upstream patch to fix building rules for multiple IP families (bsc#1105899)
* 0001-fw_zone-consider-destination-for-protocols.patch
* 0002-fw_zone-fix-services-with-multiple-destination-IP-ve.patch
- Add firewalld-fix-firewalld-config-crash.patch: set
nm_get_zone_of_connection to return 'None' instead of 'False' for
automatically generated connections to avoid firewall-config
crashes. Patch provided by upstream (boo#1106319,
gh#firewalld/firewalld#370).
- Also switch firewall backend fallback to 'iptables' (bsc#1102761)
This ensures that existing configuration files will keep working
even if FirewallBackend option is missing.
* 0001-firewall-backend-Switch-default-backend-to-iptables.patch
- Update to 0.6.1. Some of the changes are:
* Correct source/destination in rich rule masquerade
* Only modify ifcfg files for permanent configuration changes
* Fix a backtrace when calling common_reverse_rule()
* man firewalld.conf: Show nftables is the default FirewallBackend
* firewall-config: fix some untranslated strings that caused a UI
bug causing rich rules to not be modify-able (bsc#1096542)
* fw_direct: avoid log for untracked passthrough queries
* fixed many issues if iptables is actually iptables-nft
* Use preferred location for AppData files
* ipXtables: fix ICMP block inversion with set-log-denied
* fixes ICMP block inversion with set-log-denied with
IndividualCalls=yes
* nftables: fix set-log-denied if target is not ACCEPT
* fw_direct: strip _direct chain suffix if using nftables
* NetworkManager integration bugfixes.
- Switch back to 'iptables' backend as default (bsc#1102761)
- Update to 0.6.0. Some of the changes are:
* update translations
* firewall-config: Add ipv6-icmp to the protocol dropdown box (#348, bsc#1099698)
* core: logger: Remove world-readable bit from logfile (#349, bsc#1098986)
* IPv6 rpfilter: explicitly allow neighbor solicitation
* nftables backend (default)
* Added loads of new services
* firewall-cmd: add --check-config option
* firewall-offline-cmd: add --check-config option
* firewallctl: completely remove all code and references
* dbus: expose FirewallBackend
* dbus: fix erroneous fallback for AutomaticHelpers
- Remove patches which have made it upstream
* firewalld-add-additional-services.patch
- spec-cleaner fixes
- Update to 0.5.3 (bsc#1093120)
* tests/regression: add test for ipset with timeout
* ipset: allow adding entries to ipsets with timeout
* translations: update
* helpers: load helper module explicitly if no port given
* helpers: nf_conntrack_proto-* helpers needs name cropped
* config/Makefile: correct name of proto-gre helper
* tests/regression: test helper nf_conntrack_proto_gre (#263)
* functions: get_nf_nat_helpers() should look in other directories too
* functions: Allow nf_conntrack_proto_* helpers
* services: Add GRE
* helpers: Add proto-gre
* tests/regression: add test to verify ICMP block in forward chain
* ipXtables: fix ICMP block not being present in FORWARD chain
- Translations update (bsc#1081623).
- Backport upstream patches to add additional services (bsc#1082033)
* firewalld-add-additional-services.patch
- Update to 0.5.2
* fix rule deduplication causing accidental removal of rules
* log failure to parse direct rules xml as an error
* firewall-config: Break infinite loop when firewalld is not running
* fix set-log-denied not taking effect
* po: update translations
- Remove high-availability service. SUSE HA uses the cluster service
provided by the yast2-cluster package (bsc#1078223)
- Update to 0.5.1
* ipXtables: fix iptables-restore wait option detection
* python3: use "foo in dict" not dict.has_key(foo)
* Fix potential python3 keys() incompatibility in watcher
* Fixed python3 compatibility
* ebtables: fix missing default value to set_rule()
* fw_zone: fix invalid reference to __icmp_block_inversion
* zones: Correct and defer check_name for combined zones
- Update to 0.5.0
* firewallctl: mark deprecated (gh#firewalld/firewalld##261)
* Add nmea-0183 service
* Add sycthing-gui service
* Add syncthing service
* Adding FirewallD jenkins service (gh#firewalld/firewalld#256)
* services/high-availability: Add port 9929
* Fix and improve firewalld-sysctls.conf
* firewalld: also reload dbus config interface for global options
* Add MongoDB service definition
* src: firewall: Add support for SUSE ifcfg scripts
* Add UPnP client service
* firewalld: Allow specifying log file location
* firewalld/firewall-offline-cmd: Allow setting system config directories
- Drop obsolete patch
* 0001-suse-ifcfg-files.patch
- Drop tests installation
- Introduce new python3-firewall and firewall-macros subpackages.
The first one contains the firewalld python3 bindings and the second
one contains the RPM macros for firewalld.
- Replace dbus-1-python requires with dbus-1-python3: since
firewalld was migrated to python3, we also have to require the
python3 dependencies (boo#1070310).
- Add missing python3-gobject-Gdk dependency (boo#1069952)
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
- Make sure to use python3 everywhere (boo#1068778)
- Add combined upstream patch to support SUSE ifcfg network files.
* 0001-suse-ifcfg-files.patch (gh#firewalld/firewalld#262, fate#323460)
- Update to version 0.4.4.6
* firewall.core.fw_config: Fix check for icmp builtin name
* config.services: docker-swarm: fix incorrect attribute
* xmlschema/service.xsd: Fix protocol looking for name instead of value
* Add docker swarm service (gh#firewalld/firewalld#230)
* Adding FirewallD redis service (gh#firewalld/firewalld#248)
* Adding firewalld zabbix server and agent services (gh#firewalld/firewalld#221)
* firewall-offline-cmd: Don't require root for help output
* doc: firewall-cmd: Document --query-* options return codes
* firewall-cmd: Use colors only if output is a TTY
* core: Log unsupported ICMP types as informational only
* add bgp service to predefined services edit to config/Makefile.am
* Add git service
* Add kprop service
* minidlna definitions (gh#firewalld/firewalld#236)
* SpiderOak ONE listens on port 21327 and 21328
* autogen.sh: Allow skipping configure via NOCONFIGURE env var
* Add missing ports to RH-Satellite-6 service
* Reload nf_conntrack sysctls after the module is loaded
* Add NFSv3 service.
* config/Makefile.am: Add murmur service (a95eed1)
* add new service IRC
* firewall.core.prog: Simplify runProg output: Combine stderr and stdout
* firewall.core.fw: Fix possible dict size change in for loop
* firewall.core.fw: Use new firewalld git repo in firewalld organization
* config/firewall-config.appdata.xml.in: Use new firewalld git repo in firewalld organization
* firewall.core.fw_zone: Rich-rule ICMP type: Error only for conflicting family
* firewall.core.rich: Add checks for Rich_Source validation
* Handle also IPv6 with the zone masquerade flag
* Add IPv6 support for forward-ports in zones
* firewall.command: Enable parse_forward_port to work with IPv6 adresses
* firewall.core.fw_zone: Fix IPv6 address in rich rule forward ports
* add Murmur (Mumble server) service
- spec file fixes to avoid rpmlint warnings about duplicate files.

- Switch to python3
- Run spec cleaner
- Move autogen to build section
- Add systemd requirements
- Update to version 0.4.4.5
* firewall-offline-cmd: Fix --remove-service-from-zone option (rh#1438127)
* Support sctp and dccp in ports, source-ports, forward-ports, helpers and rich rules
* firewall-cmd: Fix --{set,get}-{short,description} for zone
* firewall.core.ipXtables: Use new wait option for restore commands if available
* Adding ovirt-vmconsole service file
* Adding oVirt storage-console service.
* Adding ctdb service file.
* Adding service file for nrpe.
* Rename extension for policy choices (server and desktop) to .policy.choice (rh#1449754)
* D-Bus interfaces: Fix GetAll for interfaces without properties (rh#1452017)
* firewall.core.fw_config: Fix wrong variable use in repr output
* firewall.core.fw_icmptype: Add missing import for copy
* firewall.core.fw_test: Fix wrong format string in repr
* firewall.core.io.zone: Fix getattr use on super(Zone)
* firewall.functions: New function get_nf_nat_helpers
* firewall.core.fw: Get NAT helpers and store them internally.
* firewall.core.fw_zone: Load NAT helpers with conntrack helpers
* firewalld.dbus: Add missing properties nf_conntrach_helper_setting and nf_conntrack_helpers
* firewall.server.firewalld: New property for NAT helpers supported by the kernel
- Update to version 0.4.4.4
* Drop references to fedorahosted.org from spec file and Makefile.am
* firewall-config: Show invalid ipset type in the ipset dialog in the bad label
* firewall.core.fw: Show icmptypes and ipsets with type errors in permanent env
* firewall.server.firewalld: Provide information about the supported icmp types
* firewall.core.fw_icmptype: Add ICMP type only if the type is supported
* firewall.core.fw: New attributes ip{4,6}tables_supported_icmp_types
* firewall.core.ipXtables: New method supported_icmp_types
* firewall-config: Deactivate edit buttons if there are no items
* firewall.core.io.zone: Fix permanent rich rules using icmp-type (rh#1434594)
* firewall.core.fw_ipset: get_ipset may not ckeck if set is applied by default
* firewall.core.fw_transaction: Use LastUpdatedOrderedDict for zone transactions
- Remove upstream patch:
* 0001-firewall.core.fw_ipset-get_ipset-may-not-ckeck-if-se.patch
- Update to version 0.4.4.3
* New service freeipa-trust (rh#1411650)
* Complete icmp types for IPv4 and IPv6
* New h323 helper container
* Support helper container: h323
* firewall.server.decorators: ALREADY_ errors should be logged as warnings
* firewall.command: ALREADY_SET should also result in zero exit code
* tests/firewall-offline-cmd_test.sh: Only use firewall-offline-cmd
* Support more ipset types: hash:ip,port, hash:ip,port,ip, hash:ip,port,net, hash:ip,mark, hash:net,net, hash:net,port, hash:net,port,net, hash:net,iface
* New checks for ipset entry validation
* Use ipset dimension for match
* firewall.core.base: New ZONE_SOURCE_IPSET_TYPES list
* New firewall.core.icmp providing names and types for icmp and icmpv6 values
* firewall.core.fw_ipset: New methods to get ipset dimension and applied state
* firewall.errors: New error NOT_APPLIED
* firewall-cmd man page: Add missing --get-ipset-types
* firewall.core.fw_nm: No trace back on failed get_connection call (rh#1413345)
* firewall.core.prog: Fix addition of the error output in runProg
* Speed up ipset handling, (re)loading and import from file
* Support --family option for --new-ipset
* Handle FirewallError for query sequences in command line tools
* Fail to alter entries of ipsets with timeout
* Extended tests for ipset options
* Return empty list for ipsets using timeouts
* firewall.functions: Fix checks in checkIPnMask and checkIP6nMask (gh#t-woerner/firewalld#186)
* firewalld.conf man page: New section about AutomaticHelpers
* firewall-offline-cmd man page: Added -v and -q options, fixed section ids
* firewall{-cmd, ctl}: Fix scope of final return in try_set_zone_of_interface
* firewall.core.fw_zone: Limit masquerading forward rule to new connections
* firewall-config: Update active zones on reloaded signal
* firewall-applet: Update active zones and tooltip on reloaded signal
* firewall.core.fw_zone: Fix missing chain for helper in rich rules using service (rh#1416578)
* Support icmp-type usage in rich rules (rh#1409544)
* firewall[-offline]-cmd: Fix --{set,get}-{short,description} for ipset and helper (rh#1416325)
* firewall.core.ipset: Solve ipset creation issues with -exist and more flag tests
* Speed up start and restart for ipsets with lots of entries (rh#1416817)
* Speed up of ipset alteration by adding and removing entries using a file (rh#1416817)
* Code cleanup and minor bug fixes
* firewall.core.prog: Fix addition of the error output in runProg
* New services mssql, kibana, elasticsearch, quassel, bitcoin-rpc, bitcoin-testnet-rpc, bitcoin-testnet, bitcoin and spideroak-lansync
* Translation updates
- Add upstream patch to fix ipset overloading from /etc/firewalld/ipsets (gh#t-woerner/firewalld#206)
* 0001-firewall.core.fw_ipset-get_ipset-may-not-ckeck-if-se.patch
- Update to version 0.4.4.2
* firewalld.spec: Added helpers and ipsets paths to firewalld-filesystem
* firewall.core.fw_nm: create NMClient lazily
* Do not use hard-coded path for modinfo, use autofoo to detect it
* firewall.core.io.ifcfg: Dropped invalid option warning with bad format string
* firewall.core.io.ifcfg: Properly handle quoted ifcfg values
* firewall.core.fw_zone: Do not reset ZONE with ifdown
* Updated translations from zanata
* firewall-config: Extra grid at bottom to visualize firewalld settings
- Update to version 0.4.4.1
* Translation updates form zanata
* firewallctl: New support for helpers
* firewallctl: Use sys.excepthook to force exception_handler usage always
* firewall-config: Use proper source check in sourceDialog
- Update to version 0.4.4
* firewall-applet: Use PyQt5
* firewall-config: New nf_conntrack_select dialog, use nf_conntrack_helpers
D-Bus property
* New helpers Q.931 and RAS from nf_conntrack_h323
* firewall.core.fw_zone: Add zone bingings for PREROUTING in the raw table
* firewall.core.ipXtables: Add PREROUTING default rules for zones in raw
table
* New helper configuration files for amanda, ftp, irc, netbios-ns, pptp,
sane, sip, snmp and tftp
* firewall-cmd: Fixed --{get,set}-{description,short} for permanent zones
* firewall.command: Do not use error code 254 for {ALREADY,NOT}_ENABLED
sequences
* Misc bug fixes.
* For the complete list of changes please see:
https://github.com/t-woerner/firewalld/releases/tag/v0.4.4
- Relax permissions for default installation files. The files in
/usr/lib/firewalld are the default ones as shipped by the package and
there is nothing secret in them.
- Update to version 0.4.3.3
* Fixes CVE-2016-5410 (bsc#992772)
* Standard error is now used for errors and warnings
* Several fixes for use in change roots
* Systemd service file changes
* Fixed translations in firewall-config
* Command line clients
* Fixes infinite event handling loop in firewall-{config,applet} (bsc#992082)
- Update to version 0.4.3.2
* Fix regression with unavailable optional commands
* All missing backend messages should be warnings
* Individual calls for missing restore commands
* Only one authenticate call for add and remove options and also
sequences
* New service RH-Satellite-6
- Update to version 0.4.3.1
* firewall.command: Fix python3 DBusException message not interable error
* src/Makefile.am: Fix path in firewall-[offline-]cmd_test.sh while installing
* firewallctl: Do not trace back on list command without further arguments
* firewallctl (man1): Added remaining sections zone, service, ..
* firewallctl: Added runtime-to-permanent, interface and source parser, IndividualCalls setting
* firewall.server.config: Allow to set IndividualCalls property in config interface
* Fix missing icmp rules for some zones
* runProg: Fix issue with running programs
* firewall-offline-cmd: Fix issues with missing system-config-firewall
* firewall.core.ipXtables: Split up source and dest addresses for transaction
* firewall.server.config: Log error in case of loading malformed files in watcher
* Install and package the firewallctl man page
* Translation updates
- Update to version 0.4.3
* New firewallctl utility (rh#1147959)
* doc.xml.seealso: Show firewalld.dbus in See Also sections
* firewall.core.fw_config: Create backup on zone, service, ipset and icmptype removal (rh#1339251)
* {zone,service,ipset,icmptype}_writer: Do not fail on failed backup
* firewall-[offline-]cmd: Fix --new-X-from-file options for files in cwd
* firewall-cmd: Dropped duplicate setType call in --new-ipset
* radius service: Support also tcp ports (RBZ#1219717)
* xmlschemas: Support source-port, protocol, icmp-block-inversion and ipset sources
* config.xmlschema.service.xsd: Fix service destination conflicts (rh#1296573)
* firewall-cmd, firewalld man: Information about new NetworkManager and ifcfg
* firewall.command: Only print summary and description in print_X_info with verbose
* firewall.command: print_msg should be able to print empty lines
* firewall-config: No processing of runtime passthroughs signals in permanent
* Landspace.io fixes and pylint calm downs
* firewall.core.io.zone: Add zone_reader and zone_writer to all, pylint fixes
* firewall-config: Fixed titles of command and context dialogs, also entry lenths
* firewall-config: pylint calm downs
* firewall.core.fw_zone: Fix use of MAC source in rich rules without ipv limit
* firewall-config: Use self.active_zoens in conf_zone_added_cb
* firewall.command: New parse_port, extended parse methods with more checks
* firewall.command: Fixed parse_port to use the separator in the split call
* firewall.command: New [de]activate_exception_handler, raise error in parse_X
* services ha: Allow corosync-qnetd port
* firewall-applet: Support for kde5-nm-connection-editor
* tests/firewall-offline-cmd_test.sh: New tests for service and icmptype modifications
* firewall-offline-cmd: Use FirewallCommand for simplification and sequence options
* tests/firewall-cmd_test.sh: New tests for service and icmptype modifications
* firewall-cmd: Fixed set, remove and query destination options for services
* firewall.core.io.service: Source ports have not been checked in _check_config
* firewall.core.fw_zone: Method check_source_port is not used, removed
* firewall.core.base: Added default to ZONE_TARGETS
* firewall.client: Allow to remove ipv:address pair for service destinations
* tests/firewall-offline-cmd_test.sh: There is no timeout option in permanent
* firewall-cmd: Landscape.io fixes, pylint calm downs
* firewall-cmd: Use FirewallCommand for simplification and sequence options
* firewall.command: New FirewallCommand for command line client simplification
* New services: kshell, rsh, ganglia-master, ganglia-client
* firewalld: Cleanup of unused imports, do not translate some deamon messages
* firewalld: With fd close interation in runProg, it is not needed here anymore
* firewall.core.prog: Add fd close iteration to runProg
* firewall.core.fw_nm: Hide NM typelib import, new nm_get_dbus_interface function
* firewalld.spec: Require NetworkManager-libnm instead of NetworkManager-glib
* firewall-config: New add/remove ipset entries from file, remove all entries
* firewall-applet: Fix tooltip after applet start with connection to firewalld
* firewall-config: Select new zone, service or icmptype if the view was empty
* firewalld.spec: Added build requires for iptables, ebtables and ipset
* Adding nf_conntrack_sip module to the service SIP
* firewall: core: fw_ifcfg: Quickly return if ifcfg directory does not exist
* Drop unneeded python shebangs
* Translation updates
- Remove obsolete patches:
* 0001-src-firewall-core-Drop-unneeded-python-shebangs.patch
* 0002-firewall-core-fw_ifcfg-Quickly-return-if-ifcfg-direc.patch
* 0003-firewall.core.fw_nm-Hide-NM-typelib-import-new-nm_ge.patch
- Add missing %{?_smp_mflags} during install. This will speed up
the installation phase as well as expose build system's problems
due to higher level of parallelism.
- Run make during %build to ensure missing documentation is generated.
- spec file cleanups.
- Add upstream patch to prevent unconditional dependencies to the
NetworkManager typelib (gh#t-woerner/firewalld#119)
* 0003-firewall.core.fw_nm-Hide-NM-typelib-import-new-nm_ge.patch
- Update to version 0.4.2
* New module to search for and change ifcfg files for interfaces
not under control of NM
* firewall_config: Enhanced messages in status bar
* firewall-config: New message window as overlay if not connected
* firewall-config: Fix sentivity of option, view menus and main
paned if not connected
* firewall-applet: Quit on SIGINT (Ctrl-C), reduced D-Bus calls,
some cleanup
* firewall-[offline]cmd: Show target in zone information
* D-Bus: Completed masquerade methods in FirewallClientZoneSettings
* Fixed log-denied rules for icmp-blocks
* Keep sorting of interfaces, services, icmp-blocks and other
settings in zones
* Fixed runtime-to-permanent not to save interfaces under control
of NM
* New icmp-block-inversion flag in the zones
* ICMP type filtering in the zones
* New services: sip, sips, managesieve
* rich rules: Allow destination action (rh#1163428)
* firewall-offline-cmd: New option -q/--quiet
* firewall-[offline-]cmd: New --add-[zone,service,ipset,icmptype]-from-file
* firewall-[offline-]cmd: Fix option for setting the destination
address
* firewall-config: Fixed resizing behaviour
* New transaction model for speed ups in start, restart, stop and
other actions
* firewall-cmd: New options --load{zone,service,ipset,icmptype}-defaults
* Fixed memory leak in dbus_introspection_add_properties
* Landscape.io fixes, pylint calm downs
* New D-Bus getXnames methods to speed up firewall-config and firewall-cmd
* ebtables-restore: No support for COMMIT command
* Source port support in services, zones and rich rules
* firewall-offline-cmd: Added --{add,remove}-entries-from-file for ipsets
* firewall-config: New active bindings side bar for simple binding changes
* Reworked NetworkManager module
* Proper default zone handling for NM connections
* Try to set zone binding with NM if interface is under control of NM
* Code cleanup and bug fixes
* Include test suite in the release and install in /usr/share/firewalld/tests
* New Travis-CI configuration file
* Fixed more broken frensh translations
* Translation updates
- Add upstream patches
* 0001-src-firewall-core-Drop-unneeded-python-shebangs.patch: Removes
unneeded python shebangs
* 0002-firewall-core-fw_ifcfg-Quickly-return-if-ifcfg-direc.patch: Do
not try to access the network-scripts ifcfg directory.
- Drop rejected patch
* drop-standard-output-error-systemd.patch
- Minor spec file clean-up
- Avoid runtime dependency on systemd, the macros can all deal with
its absence.
- Suggest the susefirewall2-to-firewalld package which could assist
in migrating the SuSEFirewall2 iptables rules to FirewallD.
- Update to version 0.4.1.2
* Install fw_nm module
* firewalld: Do not fail if log file could not be opened
* Make ipsets visible per default in firewall-config
* Fixed translations with python3
[changes in 0.4.1.1]
* Fix for broken frensh translation
[changes in 0.4.1]
* Enhancements of ipset handling
* No cleanup of ipsets using timeouts while reloading
* Only destroy conflicting ipsets
* Only use ipset types supported by the system
* Add and remove several ipset entries in one call using a file
* Reduce time frame where builtin chains are on policy DROP while reloading
* Include descriptions in --info-X calls
* Command line interface support to get and alter descriptions of zones,
* services, ipsets and icmptypes with permanent option
* Properly watch changes in combined zones
* Fix logging in rich rule forward rules
* Transformed direct.passthrough errors into warnings
* Rework of import structures
* Reduced calls to get ids for port and protocol names (rh#1305434)
* Build and installation fixes by Markos Chandras
* Provide D-Bus properties in introspection data
* Fix for flaws found by landscape.io
* Fix for repeated SUGHUP
* New NetworkManager module to get and set zones of connections, used in
firewall-applet and firewall-config
* configure: Autodetect backend tools ({ip,ip6,eb}tables{,-restore}, ipset)
* Code cleanups
* Bug fixes
- Fix drop-standard-output-error-systemd.patch tagging
- Add libxslt-tools build dependency
- Do not recommend a specific version for the lang subpackage
- Move translations to a new subpackage
- Set DISABLE_RESTART_ON_UPDATE to 'yes' instead of '1'. The macros in
/etc/rpm/macros.systemd only check for the 'yes' value so fix it to
properly prevent the firewalld service from being restarted during
updates.
- Drop typelib(NetworkManager), NetworkManager-glib, gtk3
and libnotify dependencies (see OBS SR#360792)
- firewall-config needs typelib(NetworkManager) to run
- Initial commit. Version 0.4.0
* drop-standard-output-error-systemd.patch (gh#t-woerner/firewalld/pull/67)