- updated to 0.9.40
  - Fix potential deadlock issue in MHD_USE_THREAD_PER_CONNECTION
    mode if shutdown is initiated while connections are active. -CG
  - Fix issue in thread-pool mode where a MHD_stop_daemon()
    might not reach threads that stopped listening because
    we hit the maximum number of concurrent connections and
    the option MHD_USE_PIPE_FOR_SHUTDOWN was also not used.
    Testcase added as well. -CG
  - Update HTTPS testcases to avoid SSLv3, as SSLv3 is dead.
  - Do not enforce FD_SETSIZE-limit on worker control
    pipe when using MHD_USE_EPOLL_LINUX_ONLY (#3751). -MH/CG
  - Adding MHD_OPTION_NOTIFY_CONNECTION,
    MHD_CONNECTION_NOTIFY_STARTED,
    MHD_CONNECTION_NOTIFY_CLOSED and
    MHD_CONNECTION_INFO_SOCKET_CONTEXT to allow
    applications to trigger operations when TCP
    connections start or end, instead of just
    exposing HTTP requests starting and ending. -RG/CG
  - Fixing bug that prevented MHD_OPTION_HTTPS_MEM_DHPARAMS
    from working within a MHD_OPTION_ARRAY. -DD
  - Adding MHD_OPTION_HTTPS_KEY_PASSWORD as proposed by
    Andrew Basile. -CG/AB
  - Fix issue where for HTTP/1.0-clients that set
    Connection: Keep-Alive header a response of
    indefinite size was generated with chunked encoding. -CG
  - Fix potential infinite loop on shutdown in multi-threaded mode
    under certain conditions. -CG
- fixed info deinstall

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- libmicrohttpd.keyring: replaced maintainers keyring by new one with:
  pub  4096R/E29FC3CC 2014-12-09
  uid                            Christian Grothoff <grothoff@gnunet.org>
  uid                            Christian Grothoff <christian@grothoff.org>
  uid                            Christian Grothoff <christian.grothoff@inria.fr>
  sub  4096R/117E1AFB 2014-12-09

• Files Changed
• Browse Source

- updated to 0.9.39
- dropped libmicrohttpd-0.9.34-spdy-pc.patch (included upstream)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- do not define test_data before system header inclusion, libgcrypt
  uses this as argument parameters. (libmicrohttpd_test_data.patch)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- disable problematic test case that causes the testsuite to deadlock
  just too often (disable-stalling-test.patch)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Version bump to 0.9.34:
  * Drop tls patch seems to build fine
  * Remove code for other distros we build against 13.1+ anywhere
    within obs and it just clutters the spec.
  * Explicitely name switches in configure to make sure things go
    the desired way.
  * Fix install of libmicrohttpspdy pc file.
  + Added support for TCP FASTOPEN.
  + Removed dependency on plibc for simpler compilation for W32.
  + Added configure option "--disable-pipes" to use socketpairs
    instead of pipes for signalling to child threads. Pipes are
    always disabled on W32.
  + Corrected some uses of 'int' vs. 'size_t'.
  + MHD_USE_DUAL_STACK in libmicrohttpd currently just *inhibits
    setting* the IPV6_V6ONLY socket option, but per Microsoft's
    documentation the default on Windows is that this is enabled, thus
    MHD_USE_DUAL_STACK will not work (since it leaves the
    default). libmicrohttpd should probably just unconditionally set
    IPV6_V6ONLY to the desired value when the option is available.
  + Allow Keep-Alive with HTTP 1.0 (if explicitly requested),
    and automatically set "Connection: Keep-Alive" in response
    in this case as well.
  + Adding explicit annotations to hide symbols that are not for
    export in the C code (gcc 4.0 or higher only).
  + Adding a few lines to avoid warnings from picky compilers.
- Added patches:
  * libmicrohttpd-0.9.34-spdy-pc.patch
- Dropped patches:
  * libmicrohttpd-drop-test_tls_options.patch

• Files Changed
• Browse Source

- remove dependency on gpg-offline, source validator already
  does that

• Files Changed
• Browse Source

- do not run checks in parallel - they deadlock from time to time
- enable make debug to debug the problem on OBS in case it reappears

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- refresh libmicrohttpd-drop-test_tls_options.patch
  - add there also ignoring test_https_sni
- Update to 0.9.33
  + Fixed an issue with a missing argument in the postexample.
  + Fixed issue with bogus offset increment involving sendfile on
    GNU/Linux.  Adding support for SNI.
  + Fix for per-worker daemon pipes enabled with
    MHD_USE_SUSPEND_RESUME that were not closed in MHD_stop_daemon.
  + Fixing warnings and build issue if --disable-https is given to
    configure.
  +
  0.9.32:
  + Security fix: do not read past 0-terminator when unescaping
    strings (thanks to Florian Weimer for reporting).
  + Signaling n times for shutdown works, but for resume we need to
    wake up the correct daemon. Even if we signal n times in
    that case also, there's no guarantee that some daemon can't
    run through its select loop more than once before the
    daemon we want to wake up gets a chance to read.  Thus we
    need a signal pipe per thread in the thread pool IF
    MHD_suspend_connection is used.  This introduces a new flag
    MHD_USE_SUSPEND_RESUME to add those additional pipes and
    only allow MHD_suspend_connection to be used in conjunction
    with this flag.
    Also, as MHD_resume_connection() will be called on a
    non-daemon thread, but none of the queue insert/delete
    calls are thread safe, we need to be concerned about (a)
    corrupting the queue, and (b) having to add mutex
    protection around every access to the queues, including
    loops through timer queues, etc. This wasn't a problem

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

REMOVED DEBIAN FILES: no one bother to update them since 0.9.22, so they are barely usefull

- Update to 0.9.30
  + implements the "SHOULD" clause of RFC 2616 section 8.1.4, which
    may reduce bandwidth consumption when clients cancel requests.
  + fixes build errors with various combinations of operating systems,
    libc versions, and configure flags.
  + fixes a use-after-free crash when using epoll() in combination with
     read errors
  0.9.29:
  + epoll can now also be used with SSL connections
  + following recent HTTP/1.1 clarfications, MHD no longer send
    a "Content-length" header in CONNECT responses.
  + the "MHD_add_connection" call now consistently sets an "errno"
    value to indicate the cause of errors.
    Connections added this way are now always processed immediately.
  + fixes a recently-introduced bug which prevented HTTP pipelining
    from working properly in some cases and a build error in
    conjunction with the "--disable-messages" configure option.
- Enable build of (experimental) SPDY support.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

fix changes

• Files Changed
• Browse Source

- Update to 0.0.28
  + support for epoll-based event loops (Linux-only)
  + various new options:
    - MHD_USE_DUAL_STACK for binding to IPv4 and IPv6 at the same time
    - MHD_USE_PIPE_FOR_SHUTDOWN to cleanly support MHD_quiesce_daemon on
      non-Linux systems
    - MHD_CONNECTION_INFO_CONNECTION_FD to allow COMET applications to
      disable TCP Nagle
    - MHD_OPTION_CONNECTION_MEMORY_INCREMENT for better control over
      buffer size allocations
  + and fixes various minor bugs

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source